Search results

No changes. It just started having a delayed (more than 30 seconds) response. I just replaced the contact end. The magnet still seems to work OK. Appears to be working as it should though.

Yes, it is on a zone extender.

No, wired contact, wood door.

I installed an 1864 and once it was up and running, everything worked great. Suddenly one zone is VERY slow to respond to the zone opening and closing. Its a door using a recessed remote. I can open the door and for the most part it responds instantly. But more often than not when I close...

I will try it..

I will try that. The wiring is good, it has continuity and resistance. When I remove the power, it opens. I tried connecting the wires and it does react as it should. I have on e resistor on each glassbreak (there are 2 of them, and 2 wires)...each to their own zone, and both C contacts...

The AC-100. I originally installed the 500 series but had the same thing happen. Im positive they are on the NC terminals.

I installed a new DSC 1864 system in my house. Everything works great with a songle exemption.... the glass break detectors. They constantly show an open zone. I have a resistor at the detector and at the panel end, the 5.6ohm resistor shows. Ive set the zone to a single EOL resistor. But...

So as clearly indicated, I didnt know where the setting was if it existed so how can I post the settings. I didnt ask anyone to post a detailed response, I simply asked if what I was looking for was possible. If soneone said yes and needed more information, I wold have done just that.

So I ask the community a question and the best you can do is RTFI?

Is there a way to have the video recordings overwrite over the oldest file? Im having to constantly go into the folders and delete videos

Yes, but then I found another problem. The PC1864 board was an international version and DLS was having none of it......

Its pk5500..... Typing on a phone...

I have a used dsc pk5100 keypad but it has old data on it. How do I default it?

I have a new DSC 1864 and Im using both 5108 Zone expanders as well as 5204 power supplies. My question is how would I wire a siren to use either the expander or power supply? I dont want to overdraw my main board....

Thanks. Something Im trying to understand is if I even need a resistor for a wire Im using as a tamper line. Basically Im putting a wire down the pipe where the communication lines come into the house. I want to set it up so that if the wire is cut from outside, it triggers the alarm...

Do you happen to have the link? Im finding a lot of info on EOL resistors, but Im not sure what ones to use? A certain size resistor??

Hi... almost in the new house so I can get this programmed. What do you think of this? Im adding a tamper switch to my system so that if a wire is cut, the alarm instantly triggers. Do I need to put a resistor on the 2 wires I will use or just tie them together? (so if I am using the green...

I have one more camera to buy.... a doorbell cam. Ideally it would be POE, I ran cat6 to the doorbell.... and also have the standard doorbell as well. I would like to be able to listen and talk as well. Which doorbell camera has proven itself and be compatible with Blue Iris?

Unfortunately there isnt room to put them on the window contacts. My previous 1864 was wired by a company and the resisters are at the board..... so thats what I was going to do. My fault for not asking sooner. Im assuming the resisters are for each zone..... but not for keypads and sirens...

I wired one continuous wire (well 4 in the wire anyway) from the panel to 8 smoke detector locations and the wire ends at the last smoke detector. I'm looking for 2 wire smokies.....do they all need to be the same brand and model number?

Same thing just happened to me. I've got the app wworking now I'm trying to get that code functioning to get the clips..

Got that working, thanks. I added the attach a mp4 clip but that does not show up?

I got it... and the notifications from the website work. But Trying to get it working isnt going well. Right now Im trying to get curl..... and I think I have the other info needed

I have been having trouble lately getting alerts on my phone using GMAIL by sending it to my number@vzwpix.com. I just got off the phone and Verizon disabled the ability for that to happen to fight spam. Anyone have any other way to accomplish it?

No, it does not include them. If I need a third one of each I might have to work on a space for that battery. I also am still looking for the 2 wire smoke detectors.

I changed the setup a bit, and am going to try to use a single cabinet. I got a 28inch long cabinet and I think it will work. I changed some of the compponents. 1 Front door 2 East windows 3 Bedroom East Windows 4 Garage roll up doors 5 Garage Entry door 6 Garage Utility...

OK, I got a second 5204 on the way... guess I need a 3rd battery too. If you dont mind helping me... I may have several questions. Ive changed to a single cabinet,, and will definitely have resistor questions. Im going to use the DLS5 software to program the system. Im just need your opinion...

Thanks for your input. I guess I can add another PC5204 power supply module as well to supplement the available power. But I did change one thing, instead of doing 2 boxes, Im going to use a 28 inch single cabinet and put everything in there. I have 2 batteries as well.... And I forgot to...