Search results

Like the subject says. No changes to my BI server system or phone and the BI app just will not connect. The connection doesn't "fail" either. Just get the spinning wheel of death. My BI server is behind a router based VPN and I can connect remotely from my MacBook Air vis UI3. But not the...

Yeah, I have seen those override kits. I am not going to do that, if only because the stupid light would be on all the time. I could always just push the override button at startup. But you might be surprised how easy it is to modulate the brake to avoid the stop/start. It surprised me. But...

Yes. But to make it work we get an adapter from Dongar that has a male plug that fits into that factory female plug and includes a +5V power supply. I just got a response from the vendor and they say that these cams need both switched and constant +12v (gets converted to 5V in their included...

No, it is connected up to the factory dash cam plug in the overhead. The camera stays on while the engine is stopped. It reboots during the restart.

First, I have used Viofos for several years and like them a lot. I just got a new Toyota Tundra and a Viofo A229 duo and it works just as well as the Viofos I have had in the past. The new truck also has that auto shutdown/restart feature that we have all come to know and hate. Problem is just...

I made a gasket by shaving down a piece of weather strip and stuck it on. We'll see how this does tonight. This dome is on the north side and beneath an overhang so doesn't get any direct UV. Used to have a much better picture at night and the dome itself looks clean and clear. I also used...

Good point about the IR bleed. I can maybe cobble up a little gasket from some foam around here. And I got some eyeglass cleaner to give it a good clean regardless.

I don't have any of that around. In lieu of a reasonable substitute I guess I'll have to go buy some.

I didn't really know which forum this should go in, but here is my question. What is the best way to clean the lens and inside of a dome? I have an older HIK Vision that was fogging up at night so I opened it up, replaced the desiccant bad and wiped down the dome. But now while it isn't...

I logged out of Edge and uninstalled it, deleting all data on this device but not across my other machines. Then re-installed Edge, logged into BI via UI3 and only then logged back in to MS to synch data. It's working. I was worried I would have to delete all my saved logins and cache data...

It's something switched wrong in the Edge browser. Just tried Safari and it logged right in. I will uninstall Edge and reinstall that. Hopefully that will resolve the problem.

Didn't work.

Bottom line is that if I try to log in with any valid credentials I get sent to a blank page with the below message. Says I don't have user rights to view the page. But this happens even with the main admin user iD. While using invalid credentials just gets a failed login and try again??/ One...

This is officially nuts. If I add a simple test user with a 4 character password to the server ui3 on this remote says no such user/password... but leaves me on the login screen. But If I try my regular logon or a new separate userID I made both using my original password, confirmed to be...

Yes, didn't work. Also tried clearing browser cache. If I try to log on with false credentials it tells me that no such user or password and leaves me on the login page to try again. If I use my real credentials it says I am not authorized and takes me off the login page to a blank whit page...

Got this done today, changed my home router to 192.168.2.xxxx and updated the server static ip and all the cam static ips. Works like a charm. But I didn't write down my ui3 password and, of course, it is asking for it at my remote location. I tried a few times and reached max attempts. OK...

Thanks for the tips folks. I'll re-rack my network ip setup soon and see if that helps. I just got this new MacBook Air M2 (longtime strict windows user) and it is a bit of a learning curve. So I have been in the mood to fix some of these little tech annoyances like the VPN issue. Since I...

I did another quick test, still at the remote location, I turned on the VPN client and tried to login to my home router, 192.168.1.1, of course the admin page that came up was for the local router. And being that half the routers in the world use 192.168.1.1xxxx I guess I'll have to go home and...

Everything works perfectly me for everywhere on LTE using my iPhone natively or as a hotspot to the Mac. It is just on some wifi locations where it fails. I haven't tried in many different ones but the one I am at by far the most is a total fail, iPhone or Mac. Comcast service Linksys router...

I'll give this a try when I get a chance. PITA to have to change ip range and all the addresses. But I don't understand why this should be an issue. When the VPN is active the tunnel should be looking at the remote network, not the local one.

My home router running the VPN is on the default range of ip addresses, 192.168.1-maybe 100 or whatever. The PC running the BI and Plex servers has a static ip within that range. The router here where VPN fails is the same I am sure. No one here would have changed it.

But was you problem universal or just on networks served by a certain provider? Mine is only an issue on this particular Xfinity network but works elsewhere, including at least one other Xfinity network.

I know this has been discussed here before but wondering if there might be a new solution. I have Open VPN and BI running on a Windows server at home with Xfinity service and Linksys router. I really need to access my VPN from a friend's house, also with Xfinity service. They also have a...

OK, I got it. I had to go into task manager and stop BI process. 5 now stats up correctly.

Long time BI user from back in the 1.0 and 2.0 days... Currently running BI 4 as a service. Firstly, I am logged into Windows 10 as admin, the sole account on this machine. Not a local account but also signed into Microsoft. I have backed up my BI 4 settings and so far, have not uninstalled...

Bed cover is a Pace Edwards Jackrabbit retractable. Works great. A big trunk when you need it.... or a truck bed when you need it. :-) I almost thought he was going to be able to recover it but then there was that sign. Game over.

This just happened about an hour ago. I was merging on Rte 15 south from Rte 26 in Frederick MD and this Acura SUV just lost control, went off the road, took out a road sign and then nosed into the guardrail in the median. Totally on his own, unencumbered and unmolested by traffic. Pretty...

I'll check ZT out, but BI is not an option at this place. No PC present.

So, looking into this further I believe these current NVR systems like Lorex and Night owl have optional P2P setups so you don't need to know the ip address, have ports open or VPN, or have DDNS. Works like ReoLink, KasaCam and such where the devices "reach out" via a 3rd party server to be...

We have a remote property that I need to set up a small NVR system for. I have tried a few stand alone ip cams and while they will send alerts they can not be viewed live or accessed remotely for admin on Hughes. Which makes it a royal pain to dial in motion detection. Thinking about a small...