Search results

Hi Sheminasalam , i have 2 or 3 of that perticular model , all those Chineese Camera are générally the same hardware ( optic/cpu Module ) but they have a ( tweeked Firmware ) modified by the Vendor/Factory to work with the rest of the electronic that they have to add to complete the camera so...

Hi Sachin , unfortunately the explanation ( are only for CamHI and CamHI Pro ) will not work for your Model of camera ( because your Cam used ( CareCam App. ) . Because even if many camera have the same hardware ( Sony video sensor for example ) they have different Firmware that are tweeked (...

Hi Flwolf , the way to get the control/re-select a password is by re-setting the camera to default by holding up to 10 secondes the button that is on the cable near the power-in of the camera or in the small opening protected by screw where you can install the MicroSD card for recording. There...

Hi MHenriques i agree with Msecure set the Rate to 1 then move with the arrow or Preset than adjust to 9 than try again , is it any faster slower. It all depend if the Hardware or the seller did implement the feature. The manual does not describe the ( Rate ) because it a basic manual.

Hi MHenriques . As I said in the beginning of the tread . The module are basic and some vendor do modify the Firmware to adapt the electronic/ circuitry /feature they want to support . So as such there is not a central point for documentation, we have to rely on the specific vendor on their...

Hi lestat69 , check that in settings advance 485Set make sure the Address is (1) Protocol ( Pelco-D ) and more importantly Baudrate (9600) Data bit (8) Stop bit (1) Check type ( none ). It’s normal that the camera is moving /calibration when power-up, but after if these settings are incorrect...

Hi , no not possible to Show the Password in CamHi or CamHi Pro . Normally the camera has a reset button right by the MicroSD Card ( to hold pressed for 8 sec ). If not you might have to open the case and give us the picture of the Optic electronic module and we will be able to figure-out witch...

Hi guy s, i have deal with these Chinese Cameras for the last 7 years and there been some improvement in hardware and Firmware bug correction. The trick is the seller , the serious seller do tweak the Firmware so the camera is mostly operationnal, there is only a few of the camera modules and...

Il semble que je n’écris pas correctement ( le tread est mélangé ) car je le fait à partir d’un smartphone et ça crée des erreurs. Did you get some feedback for your vendor about the Firmware? I did received the Firmware of one of the new Cam that used the T21 chipset , I did not ordered many of...

Hi schanzerin The Firmware is ( fine tune, version number ) depending of the hardware or the Vendor Brand to meet their price point. So some camera will never have ( Humanoid detection ) because the Chip doesn’t have the capability or the Vendor sell the same Hardware ( but with a different...

Hi Looping27 , i have about the same experience as you about these camera ( bought modules and parts and buy the whole camera from several vendors that i find them more reliable or good coopération ) and i too got lost the UID of one of my camera ( after a Firmware update ) but it was my fault...

Hi Looping27 , if you re-read the previous post i did mention that all these camera work with those App.( CamHi , CamHi Pro , Dericam, LiveVision,WeCamip V2, GENBOLT Cam, LINQ,FDT, CamEye, VIPCAM, Keye , iMegaCam, CamHiext , CTRONICS , iSmCam, Sv3C and other , i cannot enumerate them All ) some...

Hi Davisonphoto The c6f0soz3n0pdl2 number should tel us some of the hardware and feature but it is not Documented . So who know But i have some Camera that do have the ( Humanoid and tracking feature ) but when i connect with the SV3C App.from the Iphone APP Store the ( option button ) in...

Hi Bidikman , i have been dealing with these camera for the last 7 years ( tru different vendor from Ebay and AliExpress ) and there has been an evolution with the product over the years. First the basic optical ( video sensor ie Sony IMX 307-337 , SC 2235-3235 and other ) are the base for the...

Hi Lucato The answer to your questions is unfortunately no to most of them and me too I wish to get access to this information. The info/Firmwares I got was in searching every Forum and Downloaded section of the many vendors and cross reference and trial and errors. Good relationship with the...

Hi Harry23 May I ask what was the issue in the first place with your camera before you did upgrade try to flash your camera with the Firmware. I am asking because those perticular Firmware are most of time safe to upgrade because they do not update/Flash everything and some issues can only be...

Hi , Humanoid detection is a few month new feature that detect in the image ( human shape/framing ) this is way better than change in the image as it is way more reliable to Detect Event ( human ) . It is not perfect as a square garbage can or tree can be identity by the software as a potential...

Hi Petr To my knowledge there is no easy way to get a backup of the Firmware from the camera before attempting to upgrade or trying to resolved problem with Firmware. I have ordered more than 50 cameras made by these Chinese manufacturer all with different Firmware and did see some improvement...

Hi Wh@tever I think we have speak before on this forum regarding these Chinese camera ( about another model ). your Ebay link do not work for me ( say it can t find the item on Ebay ) can you give me more info of the Ebay vendor you order from. I went to the Hankvision website but couldnot find...

Does the EasyN used the (AAAA-123456-BBBBB)UID format and work with the vipcam App ? I am asking because i am researching any cam/company that used the UID format(AAAA-123456-BBBBB) to test the performance of their App and check their support site/Forum just to study to get as much info as...

Hi Bedouin , do you still have your camera and used VIPCam APP ? ( nice discussion about the video format ) Time goes fast , i have found new supplier of those ChineseCam ( they get the basic video sensor hardware from vendor and add their own lens and motor ) and they called them their own , no...

Hi yes a 54 year old newbie that read many Forum and consider some of your advice, the camera you mention has been on my radar for a long time ( at a decent price I just recheck-it )I was still considering going with that brand to study-it further. Before commiting ( good money )I always...

Hi yes I am surprise that there is a significant difference in price and performance with the same web interface. The model that I order they are more expensive and it never freeze and to my knowledge all the fonctionality are working( I have no complain )except that there not much...

Hi Ferderman , these camera are improving everyday , I have received the 6 version of Firmware from my Chinese supplier. You might see this as ( insecure bullshit ) but for me this is better than begging arrogant company that do not fix things Of course they have a very poor web site (...

Hi guys , I have 22 of these cheap cameras from China( no brand ) they all have very similar web interface with different Firmware ( update from the china supplier )the only things they ask is a proof ( picture of the Firmware version in the cam Device information Software version...