Search results

  1. L

    Amcrest NVR 4108-HS

    Still going great. FW - V4.000.00AC000.0
  2. L

    Amcrest NVR 4108-HS

    @Revo2Maxx Yes I will report back. This is the longest the cams have ever stayed on the monitor.
  3. L

    Amcrest NVR 4108-HS

    OK. NVR reset done. It has been two hours and cameras are ALL still showing - no red locks. I did not get the cams back in the original order, but not sure that's a big concern. [only 7 cams] Bandwidth registering at 65.72/88.00 @bigredfish @Flintstone61 @Revo2Maxx @wittaj I want to thank you...
  4. L

    Amcrest NVR 4108-HS

    yes and very delicious too I am now installing Palemoon to try again.
  5. L

    Amcrest NVR 4108-HS

    @wittaj Sorry forgot an important piece of info. Currently using Linux distro openSuse Tumbleweed. Tried Palemoon. Didn't work.
  6. L

    Amcrest NVR 4108-HS

    When I originally did my cameras I just set them static through the web GUI. Some show as static, some show as manual on my router page. Not sure why. Another problem: I used to be able to view my Amcrest cams or Dahua cam on a web GUI [Internet Explorer days] . Now screen asks to download a...
  7. L

    Amcrest NVR 4108-HS

    If I am not doing the cams, should I unplug them? Will my camera IP's stay the same if I don't reset them?
  8. L

    Amcrest NVR 4108-HS

    OK So, to factory reset. I have gone through your video, thank you for making it @Revo2Maxx 1] Do I have to unplug the cams before I do the reset? 2] Will I have to upgrade to the latest FW once the reset is done or will the NVR keep the FW? 3] Will I lose all my record history from the NVR HDD...
  9. L

    Amcrest NVR 4108-HS

    OK TY done
  10. L

    Amcrest NVR 4108-HS

    where is that being shown?
  11. L

    Amcrest NVR 4108-HS

    @wittaj Is this what you mean?
  12. L

    Amcrest NVR 4108-HS

    @Revo2Maxx connected router into NVR and cam system through 8 port switch Error: I could not see your service on nnn.nnn.nnn.nnn on port (80) Reason: Connection timed out
  13. L

    Amcrest NVR 4108-HS

    @bigredfish My NVR and cams are separate from my router [no cable] I cannot get to the NVR Web GUI because my NVR is not connected to my router. I only have access to my NVR and cams through the NVR GUI on my monitor. Shall I hook NVR back into the router? @Revo2Maxx When I go to...
  14. L

    Amcrest NVR 4108-HS

    @wittaj I am guessing you mean accessing the router? When I took the NVR off the router I rebooted the router and after the reboot none of the cams were showing on the router. After rebooting the NVR, I checked the cams and all were accessible through the main menu > Camera> Image would this...
  15. L

    Amcrest NVR 4108-HS

    @bigredfish No, NVR not port forwarded. Cams and NVR separated from router rebooted router rebooted NVR Setup: NVR to 8 port switch 6 cams connected to 8 port switch cable connected from 8 port switch to 4 port switch 1 camera connected to 4 port switch **Note: Wireless cam not detected on...
  16. L

    Amcrest NVR 4108-HS

    OK I will change my setup, but it will mean that I will only have room for 6 cameras, unless I hook up another switch for that last camera. I think I have another 4 port switch, but I will have to dig it up. Will do that and report back. Thank you.
  17. L

    Amcrest NVR 4108-HS

    the bandwidth on the NVR monitor reads 87.12/88.00 mbps. Is this the bandwidth you are asking about? The wireless cam [Lorex W881AA 4K Spotlight Outdoor Wi-Fi 6 Security Camera] is used to monitor my pond in winter. It was not supposed to show up on my NVR. They said it was not an IP camera. I...
  18. L

    Amcrest NVR 4108-HS

    @wittaj Again excellent insight and observations. I am putting the resolution to the lowest as I write this and am waiting to see if the cams get locked. 4 cams at 640 x480x(VGA), 3 cams at 1280 x 720 (720P) are the lowest resoultions. 4 cams at bit rate 96, 3 cams at bitrate 520. They showed...
  19. L

    Amcrest NVR 4108-HS

    @wittaj @bigredfish I came on here to get help with my problem and got some very good helpful information from you both, which I am taking into consideration. Thank you. I also got a different opinion as to what the problem may be. Question: Do you not think I should give their information the...
  20. L

    Amcrest NVR 4108-HS

    While messing about with cam settings I have done something that has changed my bandwidth from 77.25/80.00 to 78.40/88.00 mbps. ??? Also, I have no idea what it is that I have done, but now my locked cams have a message on the monitor screen that says "Over decode ability". which I am guessing...
  21. L

    Amcrest NVR 4108-HS

    @Flintstone61 Yes, well when I bought it I was a beginner and in most ways I still am re IP cam setup. I know how to get to settings in the NVR, but as far as configuring it - very limited in what everything means. What would be an NVR you could recommend that would handle 8 cameras? Or at least...
  22. L

    Amcrest NVR 4108-HS

    @bigredfish Is there a way to increase the bandwidth? More RAM possibly? How do I find out how much RAM I have on this NV4108-HS?
  23. L

    Amcrest NVR 4108-HS

    @bigredfish Are you saying the NVR is made by Dahua? [not disagreeing just curious] Residu bandwidth is showing 77.25/80.00 @wittaj yes I can try that @Flintstone61 re:switching from 4108 to 4116 nvr If the NV4108-HS is wireless [only one port on back of NVR] and my wireless is not strong...
  24. L

    Amcrest NVR 4108-HS

    @Flintstone61 I lowered all my cams to 10 FPS. Did not seem to change anything. As usual when I went back to LIVE view the cams in Question they were showing but within minutes gone behind the RED lock. What about changing other settings - Resolution, bit rate type [CBR, VBR] or Bit Rate (kb/S)...
  25. L

    Amcrest NVR 4108-HS

    So, under Account: 1] I have User - named Admin, when I click on Edit>Monitor all my cams are checked. 2] I have Group which list 2 groups - Admin [Administrator Group] and User [User Group], when I click on Edit>Monitor all my cams are checked for both of these accounts. Is this what you mean?
  26. L

    Amcrest NVR 4108-HS

    Thank you, Revo2Maxx
  27. L

    Amcrest NVR 4108-HS

    My setup is 8 IP cameras - 1 Dahua [older model], 3 Lorex [E841CA, E892AB, W881AA], 4 Amcrest [IP3M-943]. All cameras are hard wired and have there own electrical power adapter. Not sure if this is pertinent, but my ISP is a cable fiber internet at 180 mbps. When I purchased the Amcrest cams I...
Top Bottom