Search results

  1. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    In almost a week with both systems running, there have only been 2 no signal alarms on the camera. Previously I was getting 6 or more per day. Any thoughts?
  2. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    Ok, well I just had 1 no signal on both systems for the cam in question. I am guessing it is a camera related issue or my config (imported settings into the other system). I will see if I can install one of the dahua cams on my other switch for testing. Then I can rule out the switch being the...
  3. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    I have the other system up, but it is not any newer. I have it on the same vlan as the cameras to see if that helps. Oddly, since I got it up and running, the other instance has not had any drops. It has only been a few hours, so it is too early to tell yet.
  4. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    I am on an older version 5.3.8.17. I have another box with BI on it with probably a newer version, maybe a few revisions higher. I can try that to see if it is there as well.
  5. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    After further investigation, there are no issues with the cables and the switch ports show no errors. So this appears to be a config issue on the camera or in BI. I will swap out one of my older Hikvision cameras that are connected to the Cisco switch with the one I have on the short cable to...
  6. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    One thing I forgot to mention. When I moved the camera to the new house, I had to re-IP it. To make things simpler, I added the old IP range to my SEC VLAN as a secondary range. This allowed me to connect to them without a bunch of headaches. I could then reach them and re-ip for the correct IP...
  7. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    Ping statistics for 10.x.x.62: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms Ping statistics for 10.x.x.61: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip...
  8. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    It was BI as well.
  9. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    I have a Ryzen 9 3900x 12-core (24-thread) with 64GB of RAM. I have 3 drives, boot is NVMe, BI storage is on a 1TB SSD and I have another 500GB SSD for other duties. MSI motherboard. Using onboard NIC. All cams are static IPs on their own VLAN routed via my gateway. It is a 3-year-old...
  10. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    No, I did not use grease on the outdoor connections. That being said, my other 9 don't have any either and not a single "no signal" among them. They have been installed for probably 8 years already.
  11. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    They are protected from the elements and are corrosion-free. I will look at cabling being the issue since the one camera with the most drops was a new run. The cam in the pic I posted is a new short 5' premade patch cable.
  12. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    Thanks, I am wondering if maybe there is some interference in the cabinet that has the switch. There is a UPS to the left. I might need to try some shielded cables to be sure.
  13. P

    Dahua IPC-T5442TM-AS random "no signal" in Blue Iris

    I just moved several cameras from another property to my house. They all worked fine at the remote site (as far as I can tell). They are now connected to a TP-SG2210MP PoE switch. I am getting random "no signal" about 5-6 times a day. I have lowered the FPS, bw, etc to see if that is the...
  14. P

    Basic Indoor camera

    I will take a look at the config next time I am there and lock it down.
  15. P

    Basic Indoor camera

    My daughter picked up one the Armcrest to try and so far it is working well. Thanks
  16. P

    Basic Indoor camera

    Thanks
  17. P

    Basic Indoor camera

    My daughter is looking for an indoor camera for a small apartment. It is mainly to watch the dog if she has to leave it alone. No need for BlueIris or similar, just a simple camera she can access. Would RING or WYZE be a good option? I imagine they are similar in features. She wants something...
  18. P

    iPC-T5442TM-AS cable pinouts

    Thanks, I ended up re-soldering the wires, used shrink tubing, and then electrical tape over everything. It is working again :)
  19. P

    iPC-T5442TM-AS cable pinouts

    Does anyone have the pinout or color codes for the iPC-T5442TM-AS? A critter decided he likes the camera more than I do and ate through the cable. I have about 6" of cable to work with adding a new rj45 jack. thanks
  20. P

    replacement Hikvision pigtail

    Which cable did you get and is everything working now?
  21. P

    replacement Hikvision pigtail

    Thank you, I thought the 11 pin version was correct based on what I saw inside the camera. I will look at that cable and will get one ordered. I just hope my old eyes are good enough to see everything ;-) There are both an 11 pin and a 11 pin with poe. Which would you recommend?
  22. P

    replacement Hikvision pigtail

    Thanks, I looked around. Just not sure what the right one is ;-)
  23. P

    replacement Hikvision pigtail

    I have an older 3MP Hikvision that a squirrel seemed to like the taste of. It is a DS-2CD3332-I turret camera. Well, the squirrel ate the pigtail within a couple of inches of the camera and I have tried replacing the connector several times (and a neighbor with better eyes). I can see it power...
  24. P

    push notifications working intermittently

    I am on 5.2.7.12 now, will upgrade to 5.2.9.23
  25. P

    push notifications working intermittently

    Glad I am not alone, well not glad.. I also sent an email to support. SMS works fine. Are you on T-Mobile as well?
  26. P

    push notifications working intermittently

    I am still having issues, it is inconsistent. I had a few times where it shows a push notification was sent but never received. I might have to add SMS and email to the list of notifications.
  27. P

    New install suggestions for low light area

    I will do some tweaking this week, just got the last 4 installed over the weekend.
  28. P

    New install suggestions for low light area

    I will be adding some light to help brighten the areas.
  29. P

    New install suggestions for low light area

    I added more cameras and I have to say the iPC-T5442TM-AS kicks ass. The picture below shows an extremely dark area without using the IR. You can see my other camera's IR in the left pic. The neighbor also has cameras and you can see his IR on the other side of the fence on the right pic. I...
  30. P

    push notifications working intermittently

    I removed the mobile device and imported it from my other working system. I did a test and it worked. Maybe something was jacked up. Only time will tell.
Top