Search results

  1. H

    Dahua CVI Bullet Cam HAC-HFW1500TLA: "Failed to acquire config."

    I cannot think of anyway to fix it if you are away from the camera. The only solution I recommend is to remove the camera, power it up using a 12V DC supply with a short power cable (say 1 meter), and connect the camera video output to your XVR/DVR also using a short cable (say 1 meter) and then...
  2. H

    Dahua CVI Bullet Cam HAC-HFW1500TLA: "Failed to acquire config."

    Please note in my case the issue was not about access (either remote or local), the issue was with voltage drop over the long and low quality cables my technician used during installation. Once I removed the camera and plugged it into a power supply with a short cable, I could change its...
  3. H

    Dahua CVI Bullet Cam HAC-HFW1500TLA: "Failed to acquire config."

    I fixed the problem by removing the cameras from their mount and placing them through very short video and power cables next to the XVR: in this setup, I was able to bring up the "Camera Property" menu without any problem and set the "Day/Night" property to "Auto". I suspect the power cable...
  4. H

    Dahua CVI Bullet Cam HAC-HFW1500TLA: "Failed to acquire config."

    Yes, the DVR firmware is upgraded to the latest version from Dahua website which is 2022/11/28. est version of
  5. H

    Dahua CVI Bullet Cam HAC-HFW1500TLA: "Failed to acquire config."

    Dear camera experts: I have installed two Dahua CVI bullet cameras of model HAC-HFW1500TLA (5MP). My DVR is Dahua XVR5104HS-4KL-I3. During the day, the cameras are in color mode and IR light is off. During the night, the cameras go to black/white mode and IR light turns on. During the day, I...
Top Bottom