Search results

I can verify that 5.7.7.13 also fixed the issue for me.

Yeah... if you go back to 5.7.6.8 it'll solve it and never get stuck triggering. The last half dozen versions are just simply unstable.

I've now tried every version up through today's 5.7.7.11 and 5.7.7.7 through 5.7.7.11 all have the same bug: give it an hour or so and at least one of my cameras will have "trigger lock" where it never stops recording. The log always indicates "AI timeout" and "AI restarted" around the time it...

5.7.7.7 and 5.7.7.8 have both been giving me a problem in that later in the day, it'll eventually stop working where one or a group of cameras will have a permanent orange outline as if it is triggering indefinitely. During that time, those cameras do not detect motion. I have a feeling it is...

I just got 2.1.9 working with BI today. I figured out that (at least for me) what works is to uninstall the old version of Codeproject, delete the Codeproject folders from \ProgramData and \Program Files and then install the new version. But most importantly after the (quick) install of the...

I've given up and gone back to 2.0.8 as well. I've spent enough time/tries getting 2.1.1 to work and it just doesn't. I'll wait until they have a version that actually properly/entirely installs like 2.0.8 instead of doing a partial install and quitting. Mike

Interesting. I'm not seeing that behavior. When I start the service, it doesn't appear to install anything and I tried to verify that by looking in the log file.

Oh. I'm on Windows and not using Docker. I can install 2.1.1 and it seems to work for maybe one trigger and then the server stops on its own and has to be restarted. I don't think 2.1.1 is even installing properly. 2.0.8 installs for like 10 minutes and you can see a lot of modules...

What does "nuked the docker container" mean? I uninstalled 2.0.8 before installing 2.1.1 thinking that'd be a clean install. Didn't work. Thanks, Mike

Downloaded and installed CodeProject AI 2.1.1 today and that doesn't work either: can't detect objects. Guess BI has to be updated to work with the latest version. Mike

On 4.8.8.3, the email problem is fixed. I also tested the web server and I can access it via both the local and remote IP. It's working for me. Mike

Eh, water under the bridge by now. Obviously the developer is dedicated and will fix it. 4.8.8.3 is out now with mention of email changes so that might fix it. Haven't had time to test it yet. Maybe tomorrow. I'm a developer myself and my opinion is that we've been spoiled: we just take the...

When I searched here, I didn't expect this problem to be posted in the release thread so I missed it. I posted mine in the main Blue Iris forum but I spend hours trying to figure this one out. The garbage characters before the "In-Reply-To" field are causing me the same problem. My email...

Found this thread regarding the same problem: 4.4.8 - November 12, 2016 I went back to the 4.4.7.4 posted there and the garbage In-Reply-To header is gone and now it's working again. Looks like a bug of the bad-pointer flavor in the 4.4.8 and 4.4.8.1 versions. Mike

I managed to get an alert sent to my own ISP instead of gmail (my ISP doesn't block incoming messages) and I found this in the header: ​In-Reply-To: East_2 Since the "From" and "To" fields appear after that in the header, I wonder if the garbage characters before the "In-Reply-To" field are...

OK. Did that. No change. I wish I had exported settings prior to the 4.4.8 update because if the problem is in the settings and I recall them, it could bring the problem back. I think the fact that the test message goes out but the alerts do not is some sort of clue. Maybe the message (or...

I've had to give up on this for now. I downloaded 4.4.5.3 and tried that and I'm still unable to send email. Things I've tried: - Rebooted - Disabled AV - Created a new gmail account - Confirmed unsecured apps are on in gmail settings - 2 step verification is off in gmail - Tried both sending...

Is there a repository or temp location on my local drive where it stores old versions? I'd like to install 4.4.7 as well because that one worked. Thanks, Mike

I noticed today that all emails sent to my gmail address have bounced since the last update on Nov 12. The error from gmail is that there is no "from" header. I have the same settings I've always had (sending from my own ISP) but I even tried sending from my gmail account. The test message...

This is something that just occurred to me. If you have your make time set to something like 0.7 seconds and you have a thin/sliver zone at the edge of the frame, when something enters the frame, it's possible that it could pass through zone B in less than the make time and be in zone A within...

I think it's evenly divided. I've never gone to the trouble of counting the grid squares but you'd have to take your camera resolution and divide by the number of grid squares to figure out how many pixels each one is. Just by looking at it, I think you'd have to at least triple the width of...

I see a couple things that I wonder about. First, the majority of the larger area of zone B is partially blocked by tree limbs. You may need to reduce your object size (maybe try something like 300) to detect something behind those limbs. Also keep in mind that in the warm season, leaves on...

May need some more info to help. Can you post a screen shot of the zones and the motion detection settings? Mike

I think I would try turning on object detection and setting the distance to 50 or 100 pixels. That should solve it. Mike

UPDATE I supplied Ken with some BVR files and the camera export for diagnosis. I'm happy to report that 4.3.0.14 has solved the issue with BI not detecting passing lights on a dark frame. My telephoto camera picked up every set of passing headlights and taillights last night... for the first...

You could also try cancel shadows along with the proper object size and contrast to go with it. If you can see through the steam, it might cancel it as just a brightening of the background. If the steam is thick enough though, there may not be much you can do other than the one suggestion...

It's a reasonable theory, but I think I can disprove it. When cars go left to right, it's two headlights that are brighter and bigger than most taillights and they get bigger. Still doesn't fire. What does fire is motion perpendicular to the camera though, but I think the common thread there...

Just another update... 4.3.0.10 still doesn't fix the issue where my camera can't detect taillights or headlights sweeping across an otherwise black frame. Ken has had other things to do, so I'm hoping he just hasn't gotten to it yet and he'll work that fix into the next version or so. I sent...

I was the one (followed by another user) having issues with object detection on a telephoto camera, where larger vehicles swept the whole frame. Found out from Ken that when an object exceeded 67% of the frame, it reset the motion sensing. He made this an option and now when I uncheck that...

Yes, you do. Starting I think with 4.3, you now mark the areas you want detected. So anything in green is the detection area. Areas that are not green are not detected. Mike