Search results

Ok thanks I will read through all the reviews

I’m currently using 4 hikvision bullets connected to my synology NAS: It’s a pretty basic domestic home set-up where I just want to keep an eye on things and give me a basic level of security. The cameras I’ve got are all getting a little old with debatable security issues on the firmware. 2 are...

Thank you! This upgrade went smoothly, straight on with 5.4.5 I also have 2 chinese DS-2cd2035-i running 5.4.2. Is this FW exposed to security vulnerability? Can this device be updated, I was under the impression not?

OK, thought I'd try an sort this early 2032 chinese camera out. Its had the traditional hack with mtdblock5 & 6 being edited. I checked mtdblock1 and its just full of 'F's'. Its running 5.1.0, however when I try a webgui update to 5.2.0 I get ' Language version mismatch' error. Any Ideas, you...

OK, thanks. I've turned port forwarding off for now. Strange that now this morning the cameras appear fine ie 'hacked' not showing in live view. Anyway obviously needs sorting. So my English cam ..CCWR.. FW V5.3.0 build 15032. Update through web yeah? One version at a time or all the way? My...

Sorry, I have just looked but its been a while and I cant remember the update method! So what is the recognised update method and where to source the firmware? My other DS-2CD2032-I is Serial No. DS-2CD2032-I20140808CCCH475660525 Firmware Version V5.1.0 build 131202 This one then is chinese I...

In the short-term is a password change sufficient? I seem to remember that a firmware upgrade was not a 5min job, especially as I think the camera is a Chinese variant. I have asus ac66u, so VPN via router I guess is best option then, but I need a subscription, yeah?

I have 2 DS-2CD2032’s and 2 DS-2CD2035’s as part my synology surveillance system, anyway one of the cameras has now gone onto b&w live view with the stamp ‘hacked’ embedded in the view. This is the camera: DS-2CD2032-I (serial DS-2CD2032-I20150410CCWR511624194) FW V5.3.0 build 150327 Not sure...

Sorted it, basically about 40mm away from the reflective surface and all was good. Can someone point me to a thread, recommending motion detection setup in order to minimise rain detection?

Yes, that was the original location. Same problem, perhaps not as bad, reflection was of top of black lamp housing. I moved it back to try and improve the situation and the fogging was worse, I guess the upvc is more reflective? Is it the glossiness which causes the problem. If I move it back...

IR on these cams at this range is usually ok as per my other cams. At dawn/dusk the image changes from foggy to clear as soon as the IR auto switches off. So think it is the reflection issue.

Its a 12mm camera for pin point, so no option to rotate a little. Just wondering how far away from fascia it may need to be? See attached.

Got a new DS-2CD2035-I mounted on the side of a plastic fascia. It goes very foggy when the IR comes on at dusk, I guess this is the IR reflection problem. Just wondering if anyone can advise what distance it needs to be away from adjacent surfaces to get rid of the problem?

Hi, I need one more license key, anybody selling an old released key. Or can anyone point me in the right direction for the best price on one of these?

I've got 2 of these cameras (from different suppliers). The one camera (Firmware Version V5.1.0 build 131202) is set to 2048*1536 However the other camera (Firmware Version V5.3.0 build 150327) does not have the ability to set to 2048*1536 only 1080 o r720. Any ideas appreciated?

Hi, just having a look into this again. (iVMS-4500 Android). Is anyone able to successfully turn the alarm push notifications on/off whilst away from home. Just getting connection failed. Cameras are setup using IP/domain address, is a HiDDNS any better? Notify Surveillance Center is ticked in...

Thanks, I've just bought a 35 from eebey (60quid China). Yes, it looks like its just the H.265 difference, which I'm sure will be compatible with synology surveillance station. I believe you can switch it to H.264 as well if needed.

Looks like most shops are offering the ds-2cd2035-i as a replacement for the 32, whats the difference?

Which model is the nearest equivilant to the DS-2CD2032-1, I have 2 of these and need to add a third but not sure if it is the 35 or the 42 which replaces the 32 which doesn't seem to be available now. Also, if its allowed, where to buy from (UK btw)?

OK. So what's the best way to log in to the camera via a mobile android device when you are outside the LAN? Via a web browser I presume which all gets quite fiddly especially for a few cameras. Its a shame you cant just turn on/off via the app.

Yes, this works. But there is no quick way to turn notifications on or off, without going through the set up procedure every time every time you want to turn on or off. PITA! Is there an alternative app that does work? Or is there a better fix?

OK, I'm happy to leave it alone. However, my first cam runs version 5.3.0 and I can connect to it using ezviz from my phone, this second chinese one on 5.1.0 I cant access it on ezviz, so is there a better android app to use?

Anyone, please?

Just got one of these (chinese) from auction site. Seems ok wont connect to ezviz though. Anyway, firstly should I upgrade the fw and to what version? Can someone link me to a correct thread for this?

Ah right, my fault, I saw 12v and bought a 12v poe, didn't check it was 802.3af. This one then: http://www.ebay.co.uk/itm/48V-0-5A-PoE-Injector-Power-Over-Ethernet-Adapter-for-802-3-af-IP-Camera-Wlan-AP-/281886043570?hash=item41a1b7adb2:g:lzYAAOSwVL1WD9pQ Only 2 cameras to power. So doesn't...

I bought one of these: http://www.ebay.co.uk/itm/12V-1A-Wall-Plug-POE-Injector-Ethernet-Adapter-IP-Phone-Camera-Power-Supply-UK-/281559782891?hash=item418e4555eb:g:SvQAAOSw1ZBUsrBM It will not power my hikvision DS-2CD2032-1? At the moment i've got separate 12v psu and all is fine. I just read...

Ah right, that works now, didn't see any mention of that in the tutorial. Thanks. Will try the rest tomorrow now.

Attempting the mtd hack. Putty fails to connect to ip (192.168.1.65) of camera port 23. 'connection error connection timed out'

Thank you! Camera now working on 5.2.5 and I can log on to it again. However, the menu is in chinese. Mtd hack 5.2.5 & 5.2.8 Full English is it now? Wow, looks complicated! I don't quite get why the firmware upgrade just done, doesn't give me English?

Logging on to the camera 'ip address into firefox' I get: Access Error: 404 -- Not Foundfirmware language mismatch: /home/webLib