I have face detectection set up on all of my cameras and IVS by recorder for all of my IVS rules. For some reason I can not get the FD to work on 2 of my cameras ( IPC-HDBW4231F-AS CA-HZ2030U ).
I have enabled FD through both the camera GUI as well as the via the NVR menu (AI by camera).
The...
This is what I ended up doing.
I just set the IVS Human detection from the AI on the NVR to trigger the PTZ presets using the overview cameras.
Still testing but I think this should work much better anyway.
Thanks for the responses guys.
What I mean by less than desirable is the cameras IVS triggers the autotrack but then its like the autotrack gives up and ends up zoomed in on my feet or something and stops until idle motion is triggered for it to head home.
As far as I can tell the IVS via "AI...
I have a SD592305U-HNI and the PTZ autotrack is less than desirable. I am wondering if I can enable autotrack on the camera itself and setup IVS via "AI by NVR" on the NVR5208-8P-EI as the NVR has people and vehicle detection built in unlike the camera?
DMSS playback not allowing me to filter the NVR AI IVS.
When I go to playback/filter/AI Smart I am not getting any results. The NVR is Dahua NVR5208-EI and everything works localy on the NVR AI search and regular search.
Have they not updated the DMSS app to be able to filter the onboard NVR...
I ended up doing the opposite of this.
Apparently, I had FD via my cameras AI and was able to use the NVR IVS which seems to be working great so far.
I just wanted the camera to grab stills of faces. I didnt really have the need for FR so no real loss there!
Right? The only reason I tried it is because when I upgraded a customers NVR to an AI NVR I rembered it said something about the hard drive needing to be formated for the AI features to work.
One more thing.
I just noticed AI search isnt working with AI by recorder enabled.
Any suggestions?
In case someone else runs across this issue:
I just had to reformat the Hard drive because the one it came out of was not an AI NVR.
Update: I unchecked all the IVS by recorder rules and was indeed able to activate FD/FR. That being said, its kind of a bummer I cant select either or on each camera but I didnt really need it anyway.
Thanks for all the help!
Honestly, the reason I upgraded was to have better AI with less false alarms than the cameras AI.
I beleve so far, the NVR AI is superior though I just installed it last night. Now I think its a matter of getting used to not having my phone litterly blow up with notifications when someone...
Wait, so if I am using IVS triggers on any of the cameras ( 4 in total) via "AI by recorder" than FD/FR will not work on a camera even if I'm not using IVS on that camera?
Yes, it def should say "or" that would eliminate the confusion for sure!
Under Smart plan/ Local I only have two options.
"AcuPick" "AI Mode" what one do I select to disable IVS?
I just got this NVR5208-EI to give some of my old camera AI and I can not seem to figure out what I need to enable or disable for the Face Recocnition to work with one of my cameras.
The message I get when trying to anable it is "Limited resources. Please disable IVS of recorder first and then...
Got it!
Jeez, my eyes must be getting bad because right above all the fancy Smart Plan icons it says very clearly "After AcuPick is enabled, Video Metadata cannot be used for attribute detection."
Seriously, I cant thank you enough for your help Steve.
Is there a way to enable this on the camera through the NVR? I currently do not have access through the local network that this system is connected to. I'm accessing it through SmartPSS / Link to web option.
Hmmmm, I do not see the option to run on NVR under AI / parameters / SMD (or IVS)
I have NVR16CH-2AI. When I go to ai / parameters / video meta data I get a message saying "The config is not supported" when IPC-Color4K-B180 is selected.
When I select IPC-T5442T-ZE, options for HumanTrait / NonMotorDetect / VehicalDetect
Looks like the Both the NVR and the Camera have to...
Thanks Steve
I'm not sure if the IPC-Color4K-B180 & IPC-T5442T-ZE cameras are wizmind as they are OEM and have diffent model numbers than the ones on dahua website.
I've just installed a newer AI NVR and cameras for someone, so I've been trying to familiarize myself with the new features.
When I go to AI search/ SMD I get results for both human and motor vehicle everything seems to be working as should.
When I go under AI search/ Human detection, I get no...
Thanks Tony, Good suggestions.
I went ahead and contacted NHM directly through their website to get more info. I'm for sure impressed by their videos o_O
I'm curious if anyone here can recommend or uses a 24/7 security camera monitoring company and if so can you use your current nvr and cameras or do they require use of their systems?
Thanks guys, I guess I had to deselect "pause app activity if unused" under dmss permissions. Apparently if enabled this removes permissions automatically! from there the video clips show under the "ME" button as bigredfish stated.