Search results

I know this is an old post but maybe someone can use this info. I used to test tinycam on some old cell phones just to see if they would work as a baby monitor and it worked well enough. I couldn't get the sub stream to work but the mainstream works. Here is a screenshot of my configuration...

I'm in a bad signal location this week and the videos are coming to my phone super choppy . I was wondering if there is a way to download a clip from my blueiris server directly to my phone through the app? I tried long press on the clip and selected the export function but all that did was...

I have a small chicken coop 4'(l) x 5'(w) x 4'(h) , if I put this camera on the ceiling will I see everything from the ceiling to the floor? It's really too bad the camera doesn't stream de-warped video to BlueIris because the camera interface looks awesome de-warped.

Thanks for the detailed response. I bought the 4 port switch Flintstone61 suggested and connected it directly to my existing switch in the garage. DHCP is all controlled through my home router. My router always assigns the same IP to the same mac address so static IPs are not necessary on my...

ok that might work , in addition to the 2 cameras, I'll want to run an esp32. I'll check if I can get one with a POE ethernet port or get a cheap wifi AP. Thx for the reply

I have run a cat6e cable and a 120v feed to my chicken coop. The cat6e is coming from my poe managed switch in my garage (which is directly connected to my home router in my home). At the coop I have 2 cameras installed, one is a dahau poe camera outside the coop and an amcrest 1051 ptz camera...

I block all my cameras from accessing the internet but let BI access the net for outgoing only and incoming connections are blocked. I run an asus AX88u router with merlin firmware and I have the openVPN server enabled. This allows me to connect to my local lan and access my BI server...

Wow TinyCam Pro is great and works really well. Super stable and very easy to setup. It fulfills almost everything in my list including video and audio feeds. To get it to stream the video and audio to blueiris I use the TinyCam webserver APIs to call up the streams. The only thing though...

Thanks for the suggestions, I'll check those out.

Looking for suggestions for the best rtsp streaming app for my old android phones. Preferably I would need at least the following features. -username and password protected -ability to lock the phone while streaming -video and audio streaming -works with blue iris Optional but nice to have...

Same here I noticed this too when I tried the latest version. The app as well is not handling hidden cameras as it was prior to its last update. Maybe they are related.

All Cameras are set at 1.00

I have 6 cameras running and for the most part my system is running great. I've ironed out pretty much all the major issues but one issue is lingering and was wondering if anyone would have an idea why BI isn't saving the pre-trigger video to file for me. Once in 10 triggers it might save the...

I'm running 5 cameras, 2 wifi cameras in the house connected to my router and 3 wired Dahau cameras connected to a managed POE switch in my garage as is the BI server. Yesterday we had a major thunderstorm pass in our area, for a good 45 minutes it was constant lightning strikes and thunder...

Can't wait to see what the price will be for the SD49425XB-HNR 4MP 25X Starlight PTZ

I have a garage camera recording footage and I want to export a selection of video to a .mp4 but I only want to export a zoomed in area of the footage. Can this be done in BI or can I only export the full screen video?

bp2008 great wiki explanation by the way

thx

I've noticed this in the android app while looking at live footage on my cell phone every 20 seconds the screen becomes noticeably pixelated for about 2 seconds. If I open UI3 in a browser on my android phone I see the same thing but at 40sec intervals. I used my other phone (apple) to view...

yeah I'm going to wait, maybe it was pulled for a reason. Thanks for the quick responses guys

I can't update to the last version released today. I'm running as a service and when I start BI it checks and identifies the latest update is available but when I click to update is does nothing. In the status bar it says downloading 0k/0k. Is anyone else having the same issue or is it just me?

So you want to share your live bi cam feeds?? Hahaha that made me laugh. If you are not going to use a VPN and are simply configuring your BI webserver to access the internet through your router, than the person that you want to have access to your BI can connect using TonyR's direction above...

It's a separate download. After you install BI go to the AI section in the global settings and click on the "help" button, It should open the help file at the appropriate page where you will find the DS download link and the instructions on how to install it.

Edge vector in Version 5.4.3.3 was slightly better but the new v5.4.3.4 that just came out is way better now.

Did some more testing using simple mode and I got to say the motion detection is way way better. I even get an object trigger when I am walking behind a vehicle and only my head is showing. I'm now able to pick up my cat and dog much more reliably and last night I picked up 2 stray cats in my...

actually I just tried using "simple" and wow what a difference. This is way better. I even had to decrease the sensitivity of the motion because it was too sensitive.

yes Im using edge vector

Turning Intel HA on and off in the latest stable version makes no difference in the object detection. It works as it did before before 5.4.3.0. Only in the 5.4.3.0 version does switching HA off make a noticeable improvement but neither are close to the sensitivity that the latest stable...

I emailed Ken and he asked me for my camera export , he's gonna have a look

Windows updates are disabled till next year and I'm running the latest intel gpu graphics drivers. This was all working before the latest BI update.