Search results

cbr and svc is off. i rebooted and tweaked the bitrate settings. seems to be fine now. very odd...

H265 and smart codec is off. Substream works fine. Mainstream is the issue

I am running an Amcrest camera and have the main and sub stream set to 10FPS and 10 key frames. I’m blue iris the main stream shows up as 2.4fps and a key frame rate of .1 but the substream is fine. Has anyone found a way to fix this? Camera is running latest firmware.

i set it to default and my cpu is back at 10%

should i use it? i have a fairly powerdul setup

I have for a AAEON MIX-TLUD1 motherboard with 32GB of Transcend RAM and a 1 TB Transcend NVME. It has an Intel i5-1145G7E, QC, Max Speed up to 4.1GHz. This was a 2nd motherboard for another Blue Iris Server box I was building. This is a super lower power motherboard with 28w tdp asking 400 obo

helo, i am runnning the latest blue iris build (beta) and when i turn on hardware accelration i notice my cpu jumps up. should i be using default, intel, or intel vpp im runing 8 amcrest 4k cams h265 codec with substreams at 10fps and sense ai specs are 11th gen i5 1145g7e 64gb ram 1tb nvme...

but i want to try it

thanks, going to try it out. sucks going from 400kbs to 1+ Mbps on the disc between 265 and 264 :(

do i need to change my cams from h265 back to h264 for this to work?

yes BVR, i thought i had everything maxxeed

Mainstreams 8800Kbps 72.7MPS Weird because i ave my cameras all on CBR a they highest bitrate

its and enterprise drive, needs to be replaced soon too. wierd i have 8 cameras, all 4k dahuas at 15 fps, BI is doing the motion and my CPU is only peaking 30%

I meant 6TB nas disk not a NAS itself

Thanks, I will give that a shot. I`m tryin to get my deepstack dialed in. I`m using the CPU version on an 11th gen i5 1145g7, 64gb ddr4 ram, 1tb NVME boot drive, 1tb mpcie ssd, and a 6TB WD NAS drive.

anyone?

I would like blue iris to record sub streaks 24/7. Then when external onvif motion happens I want deep stack to perform the analysis, then to record the mainstream to my alerts/ clips. the main thing is I want UI3 and the mobile app to display the mainstream in the feed. Is this possible?

Where is the dark models .zip?

uninstalling and reinstalling did the trick. Detection is much faster running on an i7 4770k!!!!! thanks!

Cpu

Alerts show deep stack not responding

I added the model and rebooted the server

Thanks i appreciate it, i unzipped combined and put it in a folder. deepstack does not recognize my dog or me anymore. wierd.

I have a 1TB m.2 installed in it. That says connection is for a 2.5” platter drive. I have a ton of 1TB 2.5” drives laying around. The 4770k is in a 2U chassis with a 256gb sata drive, a 6tb wd and drive, and 3 more 1TB 2.5” drives. I’m not going to make the switch, it would be nice if...

CPU usage on the i5 is about half vs the i7 when running 2 instances at the same time... The only issue is this is a Dell Micro 5080 and no sata connections. Need to figure out what to do for disk storage.

I`m going to set it up later tonight.

I have 9 Cameras running full resolution (4 8MP and 5 5mp) using Blue Iris and Deepstack on my 4770k w/16gb of ram. I`m not going to get into the config, but would I see a performance gain switching over to the 10500T with 64GB of ram. I know T series arent really the best for BI, but the i5...

Just picked one up. Also wondering the same thing.

I`m currently running 7 cams on a i7 4770k w/ 16gb of ram in h264 mode. i have an i5 6600 with 8gb of ram (ddr4) and was wondering if it would be worth switch to that platform since i could run it at h265

fixed the issue, i did a factory reset, re uploaded image, rebooted, and another factory reset.