Search results

I do have the IP addresses for my cams. The wireless ones are: 192.168.254.149, 192.168.254.155, 192.168.254.126 and the wired ones are: 192.168.1.110 and 192.168.1.109

so here is what I get when i have the wireless cameras working VS when i have the POE IP cams working:

My 1 year of support ended on 4/21/22 so no updates after that. I will do my best to describe my net work map. From the ONT it goes into an Arris NVG468MQ Version: 9.3.0h7d91 Cable Modem(?). One of the outbound ethernet cabled goes up into my attic and into a POE switch which powers my 2 IP...

somewhere in my notes i had written down that my IP address was XXX.YYY.Z.AA, but after my system went offline, when i checked my IP adress it was now XXX.YYY.BBB.CC. If I change my network settings to that old address, I can't access the internet or those wireless cams, but I get the POE IP...

i don't think so....I'm guessing my computer doesn't have that capability as its an old refurbed Dell of some sort running an intel i7-6700 CPU @ 3.40 GHz with 16 GB ram

I'm not especially tech savvy, but with the help of many on here was able to get my system up and running for over a year. About 6 months ago something happened (no hardware changes) and all my cameras went to no signal. I tried going through the forum and troubleshooting using the search...

Can you ELI5? I suspect this is my problem as the app used to work just fine, then after a while it only works when i am on the Wi-Fi that the BI is connected to. When I’m on a different network or on cellular I get the “unable to make connection; check server address”. BTW, I did follow the...

Thanks! More than anything, even if it doesn’t work out it’s a way to work with the equipment so that I can slowly get to know how it works better as this is all very new to me

Sorry, I failed to tag…..

It’s proof of space crypto so its very low resources unlike proof of work or even proof of stake (its only a few reads occasionally off of some attached USB drives) and I am only running 3 cameras including a doorbell cam on 16 GB of RAM on an i7-6700 processor so the CPU ranges from 15%-20% RAM...

I’m not sure if this is even possible, but since the mailman stops at roughly the same spot everyday as opposed to all the other cars that just drive by, is there a way I can save that image so that DS can analyze the other images to see if its a match so that my alerts show if and when the mail...

Googled the info and I’LL wait till tonight to rollback since I am farming/mining crypto on my BI system

1. I’ll have to google how to rollback….. 2. yes, the object detection box did the trick 3. trigger sources: motion sensor, cameras digital input or motion alarm and trigger until reset is checked 4. You’ve been a God-send more than once in my BI journey. Thanks so much for the continued tech...

Running release 5.4.9.4 X64 (7/1/21). You are right, the cancelled alerts is full of everything that normally is shown in that section. I unchecked “Hide cancelled alerts on timeline and ’all alerts’”, and hopefully that will put things back the way they were. While I have your attention, how...

For the past few months everything has been operating as expected. I recently added a ONVIF capable doorbell cam and things were working like they were supposed to. For some reason I have only gotten 2 alerts recorded all day when I normally get about 10 an hour. I have all cameras set to...

I added it by IP address like I did with my other cameras and in the configuration put it in as a generic/ONVIF and model as *RTSP H.265/MJPG/MPEG4

Got my AD410 today and installed everything without a hitch prior to integrating with Blue Iris (did a standard install with the chime kit on a mechanical chime and everything was working fine). Once Blue Iris had the camera added to its system, now the audible ringer and the mechanical chime...

I just tried to use that code and it didn’t work, but on the Amazon Website there is a coupon code for $15 off that doorbell: 5M7Q7S6N. Hopefully my limited technological skills will still manage to be able to replace my Ring Doorbell that was already installed on my house when I bought it and...

Wow! Growth is exploding since people are hearing about it and can direct their already plotted farms to start farming right away instead of having to replot. Even if this never takes off it is an interesting project and can be done on equipment you already have running for other purposes -ie...

Were you ever able to resolve your lookup time issue? As long as they exceed 5 seconds you’ll probably never be eligible to win any blocks. There’s tons of tech support over at the space pool discord channel run by Caleb Curry from Coin Breakthrough. I saw numerous people with the same issue...

There is a community driven direct fork of Chia called Flax. Unlike Chia there isn’t a 95% premine. The Network is new enough that you can jump on the bandwagon and actually earn some XFX whereas the only way to get any XCH on the Chia network is to join a pool (which isn’t even supported yet)...

Techno newb here. Same issue just happened to me. If I log onto the camera’s IP address I can see they are working fine. Can someone advise how I can find out if something has changed my DNS server like what happened to the OP and if so, what I need to update with new DNS server info so I get...

The sub Reddit is full of people that have posted screenshots of their chia blockchain winning blocks after just plotting a few plots, but for each lucky winner is probably thousands of people with 500+ plots farming for the past month and winning nothing. Early adopters had much better chances...

When I cloned the drive using a HD disk duplicator by Sabrent, it left me with a 500GB c: drive and lots of unallocated space. Not being very tech savvy, I followed some tutorials which allowed me to make a d: partition that together with c: drive totaled 2TB. After using software to convert my...

It was a 2nd hand machine with no recovery disk or manuals so I kept the original drive in case anything goes south to stick it back in to get me up and running again

I’m not the most tech savvy person, but I figured that since my Blue Iris server was on 24/7 and my CPU load was around 8% that I would utilize it to farm chia as well. My server was bought 2nd hand at a flea market for $100, but had the 6th gen i7 chip. I spent another $250 to max the ram and...

Not sure why its not dual streaming as camera GUI shows sub streaming enabled and under BI camera-record tab “record dual-streams if available” is checked. CPU currently running at 13%

. We have clips!!!

Ok, changes made and rebooting.....