Search results

So how was it fixed? I'm seeing the same issue and I can tell what the problem is - ONVIF sends a trigger, by the time that trigger grabs from BI the moving object has already passed through the frame (car going across the frame at ~30mph). So BI is examining an image that already has had the...

I recently setup BI to use Deepstack, and on a ton of the clips, they are getting tagged with a yellow stopwatch icon. For the life of me I cannot find what that icon means documented anywhere. In the log it just shows "Deep Stack: Alert cancelled ()" with no reason. If it finds nothing it'll...

Ya, I was able to get the stock loaded back onto it just fine. Honestly the biggest thing I was hoping for was a modern frigging web interface. I may play with this a bit more as I get time, but it's obviously doing a hardware check and bombing out when it doesn't find what it wants. Anyone...

Well, just comparing it to the 1831 firmware that Andy has, I'm guessing the underlying Linux OS supports both, the Lorex firmware supports almost the same camera's, just adds the 1841. Lorex Check file: 1831 Check File:

Thank you!!!! Assume you had to get these direct from support?

Tried a couple different 2.622 and 2.8. The 2.8 don't work at all, the 2.622 I think the main issue is the: do not find BOOT_IMG_NAME! In another thread I saw someone figured out it was due to misaligned partitions and found a different image that worked. I guess I'm not sure how they're...

DH_IPC-HX2(1)XXX-Sag_EngSpnFrn_NP_V2.622.0000000.8.R.180731.bin The 1831 firmware I saw floating around.

I didn't touch the bootloader so I would assume I could recover it if I can get lorex to send me the original firmware, but it doesn't seem to like what I loaded onto it. It'll get to the loading kernel, and about 30 seconds later reboots, never pulls a real IP and never fully comes online.

Using SynopGMAC-0 device Download Filename 'kernel.img'. Downloading: ################################################################# ################################################################# #################################################################...

Hrmm, can't seem to get mine to actually let me in. Goes straight to uncompressing linux kernel then stops ouputting to serial: hello world DDR_SIZE:512M LOAD DDR512M32bit_CFG... DDR training start... DDR training done. Found a Narmal img Load @ 0x00040000 to 0xC0800000, size = 56704 Done...

I've got one I'll give it a shot on next week. I just ordered some test hooks and a UART adapter, should be here Tuesday.

I'll admit up front this feels like a dumb question given you went through the hassle of getting a serial connection into the camera - but I assume you tried over TFTP and not just the web interface?

I'm wondering if it's a one-off of this cam: IPC-HFW1831E Specs seem pretty similar.