Search results

  1. pyspilf

    Strange issue recently - Dahua cameras rebooted via BI are in a loop...

    On occasion, the odd camera will go into No Signal, and I have always first tried to reset the camera or reboot it via BI. If that doesn't work, then I go to the camera GUI or power cycle it, etc. I have recently observed something new, and a bit odd... it seems to be happening for Dahua...
  2. pyspilf

    Trying to fix intermittent fault - question about nvidia drivers...

    I am experiencing a frequent issue where the BI server completely freezes. I have narrowed it down to a problem with the video card. This is windows 10 system and these issues (LiveKernelEvent 141) started happening after Windows decided to update some components despite my configuration to not...
    • pyspilf
    • Thread
    • Replies: 9
    • Forum: AI
  3. pyspilf

    About models in use

    Not sure if this has been discussed already, search didn't find anything. Running BI 5.9.9.9 and CP AI 2.9.4 & YOLOv5 6.2 BI is configured as shown: I have never been able to change this list. Now on at a camera level, it is set like this - as far as I understand this should indicate to...
    • pyspilf
    • Thread
    • Replies: 7
    • Forum: AI
  4. pyspilf

    About shield & camera pause vs triggers...

    I’m starting to suspect there is yet one more thing I don’t quite understand about how Blue Iris works… According to the help file: In my case, I configured it this way: So, in theory, triggers should be active even when the shield is not GREEN. I picked a camera and configured it to be...
  5. pyspilf

    Unstable FPS depending on what cameras active

    Context: 3 IP cameras using one point-to-point Ubiquiti radio link. 1 camera is a Dahua IPC-HFW2431S-S-S2 (4MP) and the other 2 are cheapo Nivian cameras (5MP) which will be replaced soon with decent cameras. All cameras running at 15fps, keyframes 15, H264, the Dahua at CBR 6144, the other...
  6. pyspilf

    Do some Dahua cameras actually switch properly between night and day?

    After reading a few threads on recommended settings for day/night on Dahua cameras, I configured a couple of IPC-HFW2431S-S-S2 as follows: Day - 0~4ms gain 0-30 Night - 0~8.3ms gain 0-50 I've been observing the stream in BI during the day and night, as well as recorded video, and it would seem...
  7. pyspilf

    Suggestions for camera(s) for weather - looking for 360° view

    I live in a rural area, around 3,500ft elevation, mountainy region. Weather can change very rapidly, winds can be high (so it can rain and snow almost horizontally at times...) I was considering installing camera(s) on the roof, taking advantage of a TV/weather station mast I already have up...
  8. pyspilf

    Stream from (cheap) camera unstable at higher bitrate?

    I submit this to the collective wisdom here, as it doesn't make much sense to me... I would assume that a higher bitrate setting on a camera implies less compression and therefore less processor load on the camera side. This test I ran on some cheap cameras, I have not tried the same on my...
  9. pyspilf

    [SOLVED] Can FPS value be monitored and accessed? HomeSeer & BlueIris via JSON

    Hello! Long time viewer on this forum, don't usually post. As I consider the possibility of acquiring a GPU for my i7-4790K for CodeProject AI I may possibly start posting... in any case, I have learned a lot over the years and greatly benefited from so much collective knowledge, it is much...
Top Bottom