Search results

  1. S

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    Thanks Andy. Do you have V2.800.0000016.0.R.200605 available for download? @pilotsnipes I have 3 cams on V2.800.0000015.0.R.200430 (also segmented on their own vlan), but i'm not seeing any outgoing connection attempts. Aliyun is China's biggest cloud provider (similar to Amazon AWS), so the...
  2. S

    Upgrade DSC alarm system to DIY wifi/z-wave

    Your best bet is to go with the envisalink option mentioned earlier. However as stated, you will have to check if your DSC mainboard is compatible. The envisalink integrates with home automation systems such as home assistant or openHAB. From there, you can use your alarm sensors to trigger...
  3. S

    embedding UI3 parts in a web page?

    @bp2008 thanks for the reference! I've said it before, but i gotta say it again. Love your work! Really appreciate your feedback. I'll use this guidance to see what I can put together. @Kn10 that's a creative solution and I might have to consider it if I can work out what I'm looking for...
  4. S

    embedding UI3 parts in a web page?

    Yes. My fault for not being clear. I would like to show the live feed first (already got that) and then once a user clicks on the live feed, swap out to the last clip so they can review the latest activity. @Norcal thanks for the tip! I've tried this method, but the view is still very cluttered...
  5. S

    embedding UI3 parts in a web page?

    Thanks for the reply! Sorry, I should have been more clear. Yes, I already use the grouped view. It's functional, but because this will be displayed on a small, wall mounted screen, I'd like simplify the display. Ideally, I could clean up the view a bit to remove the clip browser, CPU stats...
  6. S

    embedding UI3 parts in a web page?

    Hi all (apologies if this has been covered before), I'd like to embed UI3 in a wall-mounted tablet, but not the whole interface. I would like to just display a simplified view with the live feed and clips from a single cam. Ideally, the embedded version would give users the ability to scrub...
  7. S

    5.2.7.0 - RTSP sub-streams for high-MP cameras

    How is the new sub stream working for everyone now? Just came across this wonderful feature and enabled yesterday it for 4 dahuas on BI 5.2.9.19. Only been about a day, but seems stable so far!
  8. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi everyone, a couple of quick questions I hope someone can help with (I didn't find these in the 101): Has anyone yet found a way to get doorbell presses in ONVIF? Last I remember, only PIR was available, is this still the case? I already have a relay in place for doorbell activity, but...
  9. S

    Dec 2020 - Comparison of RTSP Doorbells

    Sorry, I don't have the settings anymore. I removed the DB11 for the Hikvision. I just remember I didn't have to change anything in BI for 2 way. I was not using the IMOU app after the initial setup.
  10. S

    Dec 2020 - Comparison of RTSP Doorbells

    Haha, anyone want to bite the bullet so we can get some sample videos for comparison?
  11. S

    Dec 2020 - Comparison of RTSP Doorbells

    Thanks for the heads up! Doorbird was deliberately left off the list since the $300+ price point was far too high, especially given its low video performance (720p) and complaints about reliability. However, it does meet most of the other requirements. Dbell is an interesting one. Will have to...
  12. S

    Dec 2020 - Comparison of RTSP Doorbells

    @David L Great suggestions. Thanks! It seems we are trying to accomplish the same thing in keeping all this detailed information organized. Thanks for your great 101 write-up on the Hikvision variants. I deliberately wrote the resolution that way to indicate the camera only shows portrait mode...
  13. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    For whatever reason, it's not written in the spec, but it does run off DC. I'm running two of them off POE cat5 wiring. One powered from a POE hub, one powered from a dedicated DC power supply
  14. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    Oh, but they DO run on DC. Mine is running off a 24v DC power supply. I'm using a relay to sense doorbell presses and sending the signal to home automation
  15. S

    Good camera for DIY doorbell cam?

    Just throwing out some ideas: IR lighting for low light conditions. RFID authentication SIP client Onboard flamethrower :)
  16. S

    Hikvision DS-HD1 Doorbell Cam

    Uh... There is a HUGE thread on this here. http://ipcamtalk.com/threads/new-rca-hsdb2a-3mp-doorbell-ip-camera.31601/ Short answer: yes it works with BI
  17. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    After taking all the steps I wrote in that other post, you can verify ONVIF events are working by looking at the blueiris alert viewer. You should see a new event every time the PIR detects motion. Here's a screencap from BI: Finally, you also have to setup the trigger in the camera trigger...
  18. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hrm, very good question! I'm afraid I can't answer that as I'm running mine over POE with buck converters, so both doorbells are operated by DC power, not traditional transformer. Hopefully someone else can chime in with their feedback?
  19. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    Running laview fw on both doorbells
  20. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    I have both laview and ezviz. If anything, I like the ezviz a little more since it came packaged with 3 faceplate options, all else being equal. Killer deal!
  21. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    Wow, on sale for $89?? That's an awesome price. Must be a special for black friday. Usually hovers around $150.
  22. S

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    This is a good point and highlights an important tradeoff for the SD-M5 compared to the Hikvision and Dahua doorbells. The affordability of the SD-M5 is great, but the higher price of the other two models also means they come with good quality exposure correction like HLC, WDR, and BLC to help...
  23. S

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    制作烧录文件 refers to firmware updates, so it doesn't seem related to password settings.
  24. S

    Dec 2020 - Comparison of RTSP Doorbells

    Awesome, thanks @VorlonFrog ! First post updated with your video, and chart has been edited to include specs for DS-KB6003-WIP
  25. S

    Dec 2020 - Comparison of RTSP Doorbells

    Good to know! If you have time, and if you can share a clip, I'd love to take a look at a video to compare performance. If you can find a way to get it to me, I can link it on the first post.
  26. S

    New RCA HSDB2A 3MP Doorbell IP Camera

    For the laview version, the six digit password printed on the sticker on the doorbell worked for me. Username was admin.
  27. S

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Oh, BI hardware acceleration doesn't work for the RTSP stream? Interesting. That's similar to the wyze cams.
  28. S

    Dec 2020 - Comparison of RTSP Doorbells

    I have not tested the original DS-KB6003-WIP (Hikvision DB1) in person, but at least based on anecdotal feedback I have seen here, the new hikvision is better in reliability, connectivity, and image quality. Hopefully someone with direct experience can chime in. I will at least say, compared...
  29. S

    Dec 2020 - Comparison of RTSP Doorbells

    Chart updated with new info on SD55 from @JustFred51 and @whoami ™
  30. S

    YooSee SD-M5 doorbell: 1080p, PoE, RTSP, Onvif, only $66

    Does anyone know if the onboard IR can be disabled? The area I would use this already has IR coverage. Thanks!
Top Bottom