Search results

  1. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    @travisk Where in your house is the AT&T combo router / firewall relative to your doorbell's and house? Feet wise. Are you in a multiple story house or ranch? Here put my Ruckus POE WAP inside of a closet wall near the ceiling opposite the doorbell chime. I have installed Ruckus AP's for...
  2. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Well a quick look I would personally use a proxy first then a better WAP. Just not understanding why BI or vlc on my pc wont work when I can connect to the rtsp stream on my wifes chromebook/or my phone only if the devices are connected to the gateway via the wifi network while the db is...
  3. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Just a quickie note here relating to my DB1 and occasional reset. 1 - Original Nelly DB1 with Hikvision firmware (3.0.2.3) NOTE: do not upgrade Batch Configuration program. 2 - Hikvision firmware Firmware Version: 5.2.4 build 200321 Encoding Version: V7.0 build 615360000 3 - edited admin...
  4. pete_c

    Weather Stations

    Started here with a 1-Wire AAG weather station in the 1990's. Then went to a Davis Weather station in the early 2000's. I also added a 1-wire lightning sensor, 1-Wire Dallas instruments tipping bucket and digital rain guage over the years. Today continue to use a serial to console connection...
  5. pete_c

    Any audio/speaker techs here? Issue with Active Subwoofer

    In the picture with the three caps the middle one (may be the angle of the photo) appears to bulge a bit. Another thing you can try is while keeping the subwoofer open. Turn it on and wait for the buzz then spray the power transistors / IC Amplifier with air to cool it off and see if the...
  6. pete_c

    Any audio/speaker techs here? Issue with Active Subwoofer

    I agree with @garycrist. Capacitors going bad will be bulging or leaking. Have a look on the BadCaps forum for methodologies of repair.
  7. pete_c

    New Zealand Rural living

    Welcome to the forum @moviefan! Worked with Telstra (Aerospace) many many years ago mostly remote. Lots of friendly folks!
  8. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    @seanblanchfield Very nice!!! Reposing this read Deep Dive into the EZVIZ DB1 Doorbell with Home Assistant All posters here for this subtopic should read it. It is now also included in the FAQ posted here: HIKVISION DOORBELL101 Personally here have the wireless doorbell integrated to...
  9. pete_c

    Ring Access?

    I can see two INC branded IP cameras in a IP ISpy Connect database. No mention of Hikvision. The software here ==> is proprietary. 1 - INC-MP30VC-280 2 - MP20V It could be a Ring based chipset on the camera in question. Personally if it does what you want it to do then it should be OK...
  10. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Here switched over to using one of two suggested by @seanblanchfield proxies for the Hikvision Doorbell. Home Assistant RTS2P I was over doing it a bit streaming to Zoneminder, Blue Iris, Alarm touchscreens, KODI and Amazon. I also quit using the built in PIR as I could never adjust it...
  11. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thank you @seanblanchfield for a concise deep dive!!
  12. pete_c

    Starlink satellite internet

    Redid lab here to test. Here is an initial drawing. Oracle free tier / OpenVPN server is working fine past 30 days of Oracle VPS testing. Configured bridging on CPE which only worked via SLAAC and IPv6 and no IPv4. Went back to putting one port in a DMZ (with an IPv4 and IPv6 address)...
  13. pete_c

    Starlink satellite internet

    They credit your account with play money for 30 days then continue to offer their free stuff. "You have $261.96 left in your trial. When your trial is over, your account will be limited to Always Free resources. Upgrade at any time."
  14. pete_c

    Starlink satellite internet

    Writing up a DIY on the PFSense (Netgate) forum for those using Starlink and T-Mobile's Internet using Oracle's free tier service and OpenVPN server. To implement this DIY you need to: 1 - Upgrade your PFSense Community Edition to PFSense + (its free) or purchase or build a PFSense box and then...
  15. pete_c

    OTA TV Stuff...

    OTA here is via direct wire to antenna (amplified) to TV's and two HD Homerun Tuners. Kodi is just another STB and only STB on a 4 TVs. For a long time used MythTV (still on but rarely recording or streaming). Still utilize Squeeze box server here and custom built Squeeze box players...
  16. pete_c

    OTA TV Stuff...

    Initially used two Tivo DTV boxes which I owned and modded for saving to NAS videos. (only SD at the time). Still have DTV (grandfathered account from the beginning of DTV) these days. Here switched over to using Kodi / HDHomerun et al years ago from Microsoft Media Center. I stay away from...
  17. pete_c

    Looking to ditch Amazon Firestick sideloaded with Chome for UI3 purposes. Which Rasberry?

    Wine no. That said I was able to run Windows XP on the second generation RPi. That said I am using PlayOnLinux (which is Wine) on Intel based computers running Linux. Rather than running a Windows VB on my Ubuntu Laptop to run Windows software use PlayOnLinux. Everything works that I have...
  18. pete_c

    Looking to ditch Amazon Firestick sideloaded with Chome for UI3 purposes. Which Rasberry?

    What of the Rasberry Nano or whatever else is out there for $20-$25? Here went cheap $50 Android TV box (4Gb RAM, BT, WLAN, Gb) and Octocore CPU. Wiped Android and replaced it with CoreElec. You can find really cheapo $25 Android TV boxes on Ebay and all of them typically have WLAN, Ethernet...
  19. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    I do not know about flashing the newer EZVIZ DB1C video doorbell. I would not flash this device with Hikvision Video Doorbell FW posted here.
  20. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    for the passive sensor current switch do i need a normally closed or open switch (or does not matter)? The passive current sensor is a switch. It is not a current transformer (CT). I purchased one that is normally open and with current draw closes. also since i will be putting the switch...
  21. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    connected my doorbell directly to the 24v (40va) transformer and it lit up and worked as it should (I was able to access the doorbell from the Ezviz app on my phone) Good news. This proves that there is nothing wrong with the doorbell. Looked again at the install.pdf file. It relates to...
  22. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Only tested the DB with a transformer on the workbend for function. Later on moved it in to production with the chime using the power module and no fuse. I can also attach a potential free switch eg the HMIp-FC1 from homematic? It is whatever you want to switch on and off with the K1/2 ports...
  23. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    I also wanted to capture the button press in openhab. My plan is/was to use also Homematic sensor - but a newer one: HmIP-DSD-PCB. Best to go passive with an external to doorbell circuit switch. 1 - use a current sensor 2 - use a reed switch in the mechanical chime that triggers from the...
  24. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Guessing here that the draw of the M&S system is too much for the EzViz Doorbell. Originally used the Ring Doorbell with no modifications and it worked well. Using the Hikvision DB I had to change transformer et al. I would separate the Video doorbell wiring from the M&S wiring such that...
  25. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Can you make a quickie drawing of your connectivity? I purchased a transformer that does 8, 16 and 24v, i hooked it up to the 24v 20va option, a 24v relay, and connected everything up, when i measure the voltage at the door bell, it reads 24-27, however the relay LED is constantly lit, and the...
  26. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Ahh.... Yes here have been using the original power kit that came with my Nelly DB. At the time I did up the original AC transformer. Ended up with a "gong" instead of a chime and then replaced my old chime with a higher voltage chime to get chime sound back. This has continued to work fine...
  27. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Will look for the schematic I posted. Its just an Elk-960 debounce board and current sensor which triggers a zone on the alarm panel. An event is triggered by the alarm panel zone which talks to Homeseer / Home Assistant. Homeseer does a doorbell announcement with Microsoft SAPI and HA does...
  28. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Here noticed some changes to the configuration which appear to work well with no freezing of the DB over a period of time. Using Hikvision Batch Configuration....Image ==> Video and Audio NOTE: here do not utilize the cloud app (no Android app is running), BI and Zoneminder and touchscreen...
  29. pete_c

    my lost connection to server has come back again or gotten worse

    @Coldair / @Gut1234 Here running Blue Iris on a Windows 2016 64 bit server. Not as much overhead with the OS like Windows 10-11 desktop OS or use Windows 10-11 no fluff Enterprise. You can also bind two Gb Ethernet ports on the BI server with 2 managed Gb switch Ethernet ports. Describe...
  30. pete_c

    New RCA HSDB2A 3MP Doorbell IP Camera

    Just noticed that the Android Hikvision iVMS 4500 app does not work any more with the Doorbell. It works fine with 3 other Hikvision cameras on the network. The Hikvision iVMS 4500 app was working fine with the doorbell.