Search results
-
POE Cameras going offline everyday at the same time
Might be stressing the POE switch. Wire up the network as shown below. Disconnect 2 of the 3 POE cameras and try again or use a POE injector and connect to switch A. Also what is the MFG and model of your router (router = switch, AP and firewall).- pete_c
- Post #12
- Forum: Networking
-
POE Cameras going offline everyday at the same time
I have had good luck here with TP-Link Easy Managed switches.- pete_c
- Post #6
- Forum: Networking
-
POE Cameras going offline everyday at the same time
All cameras go offline everyday at the same hour and don't come up until I manually power cycle the switch. AI answer: If all your PoE cameras consistently go offline at the same time each day and only come back online after manually power cycling the switch, it most likely indicates a problem...- pete_c
- Post #4
- Forum: Networking
-
POE Cameras going offline everyday at the same time
Move one camera to a separate POE injector and plug it in to switch A and see if it stays up.- pete_c
- Post #3
- Forum: Networking
-
hello from Italy
Went to Google AI. I had a similar issue here except it was relating to my Ruckus AP autobooting. Found out that the cable I had installed and tested was faulty. Installed a new long cable to test. Re terminated it and all is good. The bouncing messed with my Tasmota WiFi switches. Note...- pete_c
- Post #8
- Forum: New Member Introductions
-
hello from Italy
Welcome to the forum @ministry. What's the issue with your cameras?- pete_c
- Post #2
- Forum: New Member Introductions
-
New RCA HSDB2A 3MP Doorbell IP Camera
Hikvision - in sig - Nelly's Security NSC-DB2 NDB313-W V5.2.4 HikVision FW build 200321 - Only updated firmware once. Hikvision Batch Configuration V (old one) - running on Lenovo Tiny - Windows 2016 (mostly utilize Linux on home network). I do use ONVIF but not for motion detection as it was... -
New RCA HSDB2A 3MP Doorbell IP Camera
I am still running the DB1 doorbell with RTSP. I am using a HA proxy as the streams go to my alarm panel, Homeseer and a variety of touchscreens. -
New RCA HSDB2A 3MP Doorbell IP Camera
Still using mine here. Never used the Android app. Do not utilize the PIR. Using a Home Assistant RTSP proxy for video. -
HOME ASSISTANT (Assist) Voice Assistant
Did you program it yet?- pete_c
- Post #13
- Forum: Home Automation
-
New RCA HSDB2A 3MP Doorbell IP Camera
Might be...have to check the size. Using something similar for my outdoor lightning sensor...except that it is 1400mAH... -
New RCA HSDB2A 3MP Doorbell IP Camera
My Hikvision DB is still working fine. (RTSP and ONVIF) Can you provide a link to the battery? While the PIR is still active my preference is to utilize an external outdoor PIR. The chime is working fine connected to the alarm panel with a debounce circuit board and a current sensor board. -
How to get an indoor alarm, triggered by Hikvision camera, without internet connection?
Way back I was running ONVIF to MQTT software and found that the video motion detection was too sensitive outside. This would be the same as running Home Assistant with an ONVIF add on and configuring it for motion. You can run Home Assistant on a RPI and trigger audio output chimes or even... -
How to get an indoor alarm, triggered by Hikvision camera, without internet connection?
Personally here do not like the video motion algorithms. Especially for outdoor use. Went back to using outdoor combo PIR/Microwave motion detectors. While they are connected to the alarm they are used mostly for automation notifications and not to trigger the alarm. -
How to get an indoor alarm, triggered by Hikvision camera, without internet connection?
See if you can see the camera with the ONVIF application. IE: ONVIF device manager and look see if the motion is in the ONVIF configuration. Then go to using Home Assistant (free) using the ONVIF add on or the Hikvision Add on. You have to put HA on the same network. Create automation... -
How to get an indoor alarm, triggered by Hikvision camera, without internet connection?
Wired alarm panel connected to the camera triggers. I used software to generate MQTT from my Hikvision DB. Software integration to alarm panel. Personally here in the early 2000's used Optex combo outdoor cameras wired to alarm panel. Automation used SAPI TTS for whole home audio and... -
HOME ASSISTANT (Assist) Voice Assistant
Using it today with the little M5 echos. Testing TTS now out of the audio output of Home Assistant to the house audio which works a bit better than the little voice from the M5's. I like it better than the Amazon Echo's all over the house and being non internet dependant for VR / TTS...- pete_c
- Post #4
- Forum: Home Automation
-
Tips for Windows 11 Pro Setup?
Intel NIC. Personally installed BI (to test) on Windows Server 2016. I am more of a Linux person than Windows here. -
New RCA HSDB2A 3MP Doorbell IP Camera
Disconnect the transformer and check the AC power on it with a voltmeter. Purchase a hot spare and test DB on the workbench. I have read here of issues with the power module and or defective power modules. I do not know of a way to test it. Thinking the power module is a Hikvision DS-KPB01... -
New RCA HSDB2A 3MP Doorbell IP Camera
I agree to the above two posts. In addition I would take it to the workbench and power it up with a spare DB power supply and see if it does the same thing. Then maybe take it apart and check the battery. Here since taking off the cloud and running it through an HA Proxy have not had any... -
Is reddit right about copper cables between buildings?
Helped a buddy here who built a new home on his farm 10 years ago. He was cheap and went to using cat6 between homes which is working fine today. That said I originally suggested a wireless bridge to his apartment building in town 13 miles away. This is related to internet. His home is about...- pete_c
- Post #50
- Forum: Networking
-
RJ45 connector gone, how to replace? Crimp? New cable? Dahua SD1A203T-GN
I have a few original Optex analog combo cameras here. Built very well and I was able to install newer IP 4k 38mm camera boards in them. I did utilize cheap chinese pigtails for my connections. The plastic used for the Optex cameras has never deteriorated outside. You can probably order the...- pete_c
- Post #6
- Forum: Accessories
-
RJ45 connector gone, how to replace? Crimp? New cable? Dahua SD1A203T-GN
eBay item number:374963338550 I used these to convert my old analog Optex combo's to 4k IP cameras.- pete_c
- Post #4
- Forum: Accessories
-
RJ45 connector gone, how to replace? Crimp? New cable? Dahua SD1A203T-GN
Replace it....found the combo cable on Ebay... CCTV POE IP network Camera PCB video power cable RJ45 female connectors around $8. (as little as $4 plus shipping).- pete_c
- Post #2
- Forum: Accessories
-
Amcrest AD410: at a loss, how to make an intercom display in my bedroom?
Relating to NVRs most folks use software NVRs. Popular is Blue Iris. I utilize a Linux NVR. Software/ Hardware NVRs typically have software clients to manage them. Wireless / wired clients would have no issues connecting to an NVR. Cameras should be connected via Ethernet and not Wireless... -
Amcrest AD410: at a loss, how to make an intercom display in my bedroom?
The Leviton OmniPro 2 panel is not longer being sold. It was much less in cost when it was being sold by Leviton. Here never used Windows / Android tablets with batteries mounted on walls. I did have a couple of Android POE powered in wall tablets and my tabletops all work via POE. I only... -
Amcrest AD410: at a loss, how to make an intercom display in my bedroom?
Here using an OmniPro 2 system with Home Assistant and Homeseer and Wintel embedded tabletop touchscreens. Camera wise lately its been Amcrest. -
New RCA HSDB2A 3MP Doorbell IP Camera
My NTP time has been right on my Doorbell using the default NTP server that I cannot change. I think PFSense just sees a request on port 1,2,3 and re routes it to the server. That said because of your post I put the server name in the PFSense hosts file and rerouted it anyhow. Still using old... -
New RCA HSDB2A 3MP Doorbell IP Camera
Home Assistant Proxy server mentioned here: Home Assistant Proxy Server Since starting to use it have had no bounces of the doorbell. -
New RCA HSDB2A 3MP Doorbell IP Camera
Here have kept the firmware the same and today use an RTSP proxy server for feed.