Search results

  1. S

    Forced HDD Failure? - Burglary

    NVR is on the network, where the network does have wifi. I have triggered the alarm and does not seem to impact the NVR by itself. Coincidence or other....
  2. S

    Forced HDD Failure? - Burglary

    I have a Swann NVR and I was having HDD failures with no real explanation from Swann, other than the outlet being used - power issue. I had it plugged directly to UPS, and I have since moved to it to a power strip which is plugged into the UPS. Since I did this, I have not had an HDD issue (+/-...
  3. S

    Hikvision Cameras Drop from Network

    I have several-older Hikvision IP cams, and I notice 2-3 randomly drop from the network. I use Synology software and with recent upgrade I just noticed this drop out, which may have been happening for longer but now the window for the cam freezes so it's very apparent. Please let me know what...
  4. S

    New To Forum-voltage drop question

    Thank you. The system is new and seemed to be doing this from the start, however I am going to reveiw all the connections since it is a bit hokey, and probably install better connectors.
  5. S

    New To Forum-voltage drop question

    Ahhh. Thank you for these details. Thus will help for sure.
  6. S

    New To Forum-voltage drop question

    48 volts seems higher to me but I am not as familiar with these installs. The splitter…is that the reducer? Thanks.
  7. S

    New To Forum-voltage drop question

    Yes, I agree with switching things out. Eventually I will swap the whole system but for now I have to use what I have. $$$. Thank you!
  8. S

    New To Forum-voltage drop question

    These seem like great options and will work based on the recommended locations (indoor/outdoor). Thank you @TonyR !
  9. S

    New To Forum-voltage drop question

    Thank you @garycrist. I will research your suggestions.
  10. S

    New To Forum-voltage drop question

    I have cctv system with a max of 57m distance using cat6 with 12v 2000mA power supply for each cam. I am having what appears as a voltage drop on the most distant cam (57m). I am looking for the best / the correct solution. Can I simply use a different power supply at higher voltage, or use an...
Top Bottom