Search results

  1. GCoco

    Di-Electric Grease on Cat6

    I use it ever since I was having intermittent problems with a Ubiquiti radio. Put grease on the connection and problem went away.
  2. GCoco

    Mobotix D14 on Hikvision DS-9632NI-I8 NVR

    The camera is ONVIF compatible so it should work with the NVR, but you will lose some camera functionality. It is best with NVRs to use the same manufacturer for the cameras as that of the NVR.
  3. GCoco

    New NVR Setup - Please help me - can't find devices

    What protocol are you using. The cameras probably need to us ONVIF which is a universal camera protocol.
  4. GCoco

    Away from house and half WiFi cameras disconnected from WiFi.

    WiFi = bad Wired Ethernet = good
  5. GCoco

    facial recognition @ 200ft

    See this Required resolution | Axis Communications At night, I doubt you will be able to adequately illuminate the face
  6. GCoco

    Hikvision - Visible in SADP, not in browser

    What do you mean it is connected outside of the NVR? Do you mean it is connected to your router? Does the camera display on the NVR?
  7. GCoco

    Hikvision - Visible in SADP, not in browser

    What is the model of the NVR and camera?
  8. GCoco

    Some Ideas to improve reliability of my IP cam network

    Sounds good. Have you thought about lightning protection for outdoor runs or runs between buildings? Also I use Tycon Systems POE extenders that run about 500 feet and no a single problem. Using an UPS for your NVR or PC? (POE-EXT-GD-HP) Outdoor Gigabit PoE Extender, 802.3at in/out extends...
  9. GCoco

    Hikvision - Visible in SADP, not in browser

    We have all had similar experiences. Glad you got things working.
  10. GCoco

    IR illuminators that are 12v AC/DC compatible

    I believe you correct in that most have rectifiers in them. If you hook 12VAC to them and they don’t have a rectifier they will just flash 60 times a second. Rectifiers are cheap, just buy 1 in case it’s needed.
  11. GCoco

    Hikvision - Visible in SADP, not in browser

    What is your router IP address? What does SADP show as the camera is address? You can change the IP address of the camera in SADP. Example: If your router is say 192.168.1.1 then your camera should be something like 192.168.1.100. The first three numbers should be the same. The last can be...
  12. GCoco

    How to remote view Hikvision System on Web browser?

    In the browser type in the IP address of the NVR. Just make sure they are on the same subnet
  13. GCoco

    Hikvision - Visible in SADP, not in browser

    Is the camera in the same subnet as the browser. SADP shows all cameras regardless of the IP address.
  14. GCoco

    Another Newbie

    Welcome to the site. The only cure is more and better cameras.
  15. GCoco

    Quiet 16 ports Poe switch recommendation

    Connect your cameras to 4 of the switches. Then connect the uplink port of those 4 switches to the ports of the 5th switch. Connect the uplink port of this last switch to the input of NVR.
  16. GCoco

    Quiet 16 ports Poe switch recommendation

    There are some out there, just search for “Poe switch fanless”. Did you consider purchasing multiple 4 port Poe switches rather than one large one? Thry typically don’t have fans. That way it is cheaper to have a spare. You would need 5 to get the necessary ports (16) plus 1 more for a spare...
  17. GCoco

    Can you tell me how the hard drives + NAS work?

    What NVR model is it? Did you search these forums. I’ve seen some threads about this before.
  18. GCoco

    Use Poe from camera to power extra IR lights.

    There are numerous discussions on this just search the website. Here is one Recommendations Needed for PoE+ Splitter
  19. GCoco

    Firmware Updates for NVR and Cameras

    DOWNLOAD EU PORTAL You will find the firmware here. Make sure that you get the firmware to match your model and that you do not have Chinese region cameras. In the serial number you should see either RR or WR for non Chinese region.
  20. GCoco

    Logging into camera (Virtual Host) interface resets motion settings

    There are some image settings that can only be performed on the camera itself. The NVR is the basis for other settings.
  21. GCoco

    NEST hacked

    You are correct. Still shows dangers of using cloud based services. Using PC based software or NVR with VPN will prevent access even if they have your password.
  22. GCoco

    NEST hacked

    Hacker spoke to baby, hurled obscenities at couple using Nest camera, dad says
  23. GCoco

    Nvr through vpn

    See Wiki on the blue bar above then VPN primer for noobs
  24. GCoco

    Recommended Radios

    What I meant is you could use 2 different models of radios since one hop is 1/2 the length of the other. I was suggesting that all 4 be the same model that way you don’t have to deal with different models and if you wanted a spare you only need one.
  25. GCoco

    Channel zero issue on nvr

    See this thread — Hikvision NVR display of Channel-Zero Encoding, not wanting 1+7
  26. GCoco

    Recommended Radios

    Here his a linkUbiquiti Networks - Democratizing Professional Network Technologywhich shows throughput and range of their radios. You need the lowest throughput radio (3 cameras should be less than 20Mbps) with acceptable range. You probably are needing something in the 25km range. You should...
  27. GCoco

    Recommended Radios

    Ubiquiti has radios that can span that distance but you are going to need some tall towers unless you live in the desert.
  28. GCoco

    Yard sensors- Laser perimeter sensors or ?

    Have you thought of Dakota alert driveway alarms?
  29. GCoco

    DS-2CD2335FWD-I or IPC-HDW5231R-Z

    Have fun. See other posts where they did the same. Only Chinese on drop down menu.
  30. GCoco

    DS-2CD2335FWD-I or IPC-HDW5231R-Z

    Read the wiki on the blue bar above and search these forums
Top Bottom