Search results

  1. B

    one or more mandatory SOAP header blocks not understood message from ODM ??

    Have you tired the camera config tool, if you reset the camera it will have to be initialized before it will work again! You would have needed this software to setup the camera the first time! Edit, I noticed that it was connected to an NVR, so possible it would connect an initialize the...
  2. B

    PC hardware for Blue Iris with lower noise

    I am running BI on a ASRock, X300W Deskmini and it is very quiet, limited options for regular HD's so I am running my storage on an external Unit with a fan, the external unit makes more noise than the PC! I have also recently built up an ASRock DeskMeet X600 that does have room for 1 regular...
  3. B

    I’m having troubles with the alert list.

    How many alerts are you getting each day? Have you actually checked the files that are in the alerts folders, how many and what space do they occupy, what does the Storage tab on the BI Status window look like? You show that you have allocated only 3GB to alerts; what is the size of each alert...
  4. B

    Does this mean the HD for BI storage is kaput?

    As I said time for some diagnostics, I fully realize that you can not test a drive that is missing in the windows OS, 15 years as senior tech support for about 1,800 computers left me with a bit of knowledge to carry around in my brain!
  5. B

    Does this mean the HD for BI storage is kaput?

    Time to run some diagnostics on that disk drive!
  6. B

    Request Firmware File for 4G Smart Battery Camera Model:QG5

    This area is only about the Blue Iris Camera Software You need to post your request on the forum web link below https://ipcamtalk.com/forums/ip-cameras.4/
  7. B

    Error using Ngrok to access Bi

    I would think that it would be a speed issue, first thing to do is try from another location with a good solid internet connection. As this appears to be on a phone that would be the first thing to try before getting concerned!
  8. B

    Simple place to see where each camera is recording to?

    Not that I am aware of, the details of the camera record location is stored in the windows registry along with all of the camera details that are shown on the camera setup screens. Info on the uptime of the cameras is shown in the "Blue Iris Status" on the Camera tab, but it does not show the...
  9. B

    Indoor Table Top 4K Pan Tilt Zoom WIFI Camera?

    Yes nice camera and so is the price "$2,199.00"
  10. B

    CodeProject.AI Version 2.9.0

    Why would you have both YOLOv5.6.2 and YOLOv8 running at the same time, I thought that only running one was preferred; but I could be mistaken!
  11. B

    Blue Iris Over Internet

    Do do it securely you will need to setup a VPN or something similar between the two routers, what routers are at each end and does each of them support a VPN client? It is not a good idea to open ports for the cameras as you will likely get hacked in a very short time!
  12. B

    PC rikki

    From Google Translate Thank you for your reply. The problem has been solved.
  13. B

    What does this mean? Are there people connecting to my Blue Iris?

    Is it possible that it might be a honeypot site!
  14. B

    Camera Triggered by Floating Artifacts

    Fog also shows up as floating specks, it also looks like a snow storm!
  15. B

    Windows 11 - Powerup after Losing Power?

    If the UPS is only running half of the estimated run time, I would recommend replacing the batteries. As far as replace batteries or a new UPS, you should do some research on how to replace the batteries, as then are usually in a sort of battery pack which has to be taken apart and reassembled...
  16. B

    Windows 11 - Powerup after Losing Power?

    There are some setting in the APC software that allow you to change how low the UPS battery will get before it preforms a shutdown! I also noticed on the APC web site that that model was marked end of life in 2022, is it possible that the batteries in your UPS are just too old? Is there a...
  17. B

    Windows 11 - Powerup after Losing Power?

    Do you have the APC backup connected to your BI PC with the supplied interface cable, if not then it may not shut down gracefully and may not come back on when the power is restored, I have several APC backup units and all of them come back on after a power failure event!
  18. B

    Alert Actions won't fire with zone A to B motion.

    A possible way to get this to work may be to clone a camera and have separate zones on each one of the clones, rather than trying to get them all to work in a complex way on one camera! The additional clones should not change the load on BI
  19. B

    h.view ip camera issues ( can see locally but not remotely)

    I hope you realize the risk of having your camera on open ports to the outside internet! You have also publicly posted your internet address!
  20. B

    what made my PZT controls stop working in UI3 after some of the most recent updates

    Running 5.9.9.36 and PTZ is working fine in UI3 here also!
  21. B

    Cameras randomly dropping offline briefly

    The settings for the FPS/Key values are done in the camera web interface settings, you need to set the "Frame Rate (FPS)" and the "I Frame Interval" to be the same, recommended to be between 10 - 15 FPS. .
  22. B

    Cameras randomly dropping offline briefly

    What is your network configuration, do you have a single POE switch or multiple, is any of the network traffic from the cameras being routed through the internet router! Try switching the cameras to H264, and change to CBR. What is the FPS/Key in the camera status window, it should be 1.0! Are...
  23. B

    BI reported RAM bug?

    From the BI Help file for version 5.9.9.25, does not say much, but does hint that it is a work in progress! The inception of a new status window Overview page. This page now shows AI status along with basic system metrics like CPU, GPU, RAM. The number of AI connections and the response time...
  24. B

    BI reported RAM bug?

    If you really want to drive your self crazy, you could start comparing the RAM usage shown in task manager also! Yes my Blue Iris Status on the Overview tab shows 11% (I have 64 GB installed) so that would be 7.04 GB), BI shows it is using 651.9 MB, and task manager shows (596+77.9) = 673.9...
  25. B

    Alert Tab AI

    I would say that it would need to be checked as a trigger source!
  26. B

    JSON request always redirected to html login

    What is it you are attempting to do, is the intent to try to bypass the login screen, if so for what purpose?
  27. B

    Question about "Alert Folder"

    So far mine is not having any issue that I have found yet (5.9.9.30)!
  28. B

    Camera won't connect

    Woody, I am sorry that someone here does not have the answer for your problem, we are all volunteers here and do not have all the answers and often not enough time in our life to spend hours trying to help everyone. Sometimes some cameras can not be coaxed into working with BI, especially when...
  29. B

    5.5.5.13 single click

    Click the icon that has the green (1) in the picture below (Solo Selected Camera)
  30. B

    Question about "Alert Folder"

    Thanks for doing the testing much appreciated!
Top Bottom