Search results
-
After Firmware Update PTZ Stopped Booting on 59230UNI
Did you update both firmwares? -
IPC has no access to WAN behind built-in Dahua NVR PoE switch
Most of us stay away from P2P. You want o expose your cameras to hackers? -
Dahua SD49225XA-HNR Auto Tracking Enabled Firmware.
You should probably Email him about that. -
180 degree driveway view ?
I have noticed with similar splitters(using 2), once in a while, some of those cameras go offline, but a reboot, or two will bring it back online. I'm not sure what is going on, they lose their ip address? They are regular cameras, not POE+ ones. -
Suggestions For Front Door?
That birdhouse works great, I just have to repaint the roof, it is faded. -
Suggestions For Front Door?
The 5442TM-AS. https://ipcamtalk.com/threads/i-need-ideas-on-where-to-install-a-camera-at-the-entrance.43829/page-3 -
Trying to source replacement housing (IPC-HDW5231R-ZE)
That hardened steel piece can't be drilled out, he is right. How about using the smallest hole saw? It will be hard, since the pilot drill bit can't be used. This could be done on a drill press/milling machine only. Or maybe you can find on Ebay a broken camera. -
Trying to source replacement housing (IPC-HDW5231R-ZE)
Just be careful, because when you drill, don't push to much on it. The screw tries to come upwards. -
Trying to source replacement housing (IPC-HDW5231R-ZE)
Try drilling it out. I don't know the size of that grab(set) screw, maybe somebody knows and will let you know. Maybe you could measure it with something. You can drill it out with a drill bit for that size thread. For example, if it's M4 x 0.7, then you would use a 3.3mm drill bit. Then, you... -
Failing HW8232EP-Z
Try the biggest caps first. If you find one, just remove it. Most likely there are multiple connected in parallel. -
Failing HW8232EP-Z
I would do that and see, maybe there is some water inside. I have even repaired dead cameras. Usually, surface mount capacitors short out. I would start measuring them for short. It shows up on the network? -
Dahua SD1A404XB-GNR questions/setup
I didn't say to take the ball apart, just look at the tiny camera's lens surface, and try cleaning it. Or at least, if you see something on it... -
Dahua SD1A404XB-GNR questions/setup
I was referring to the camera lens itself(ball). -
Dahua SD1A404XB-GNR questions/setup
So, with the white cover removed, you still have that haze? The camera lens is clean? -
The HookUp ranks the Empiretech T5842 (Dahua IPC-HDW5842T-ZE) as the best affordable camera if night time performance is the main concern
Teach those Youtubers, what is a good camera. -
Dahua SD1A404XB-GNR questions/setup
Remove the whole(white) cover and see, if that way looks OK, or not. -
-
Bricked SD50225U-HNI - replace with another or something newer?
The favorite camera that most of us are using is the SD49225XA(2MP) or XB(4MP). It works way better then what yo have. I had the same gen 59225 like yours, and that one can't compare to the 49225XA, or XB. -
Suggestions For Front Door?
Here is my view from the front door. Also I have a Ring Pro as well. -
Suggestions For Front Door?
I have a camera looking across the patio, and one that is installed on the patio entrance column, hiding in a bird house. ;) -
Bricked SD50225U-HNI - replace with another or something newer?
There is a thread here, about how to unbrick it. I had an issue like this myself, and it took some time and effort to unbrick it, but it brought it back to life. Also saved some money in the process. ;) -
REVIEW- Dahua SD1A404XB-GNR 4MP AI mini PTZ
That is most likely glare. -
What changes needed, if changing cell service, or router?
I'm not thrilled about the price, either. I will be paying it for three years. First time doing that, but at least Samsung will give 4 OS updates for that, so I can keep it longer. My Note 8 does not get anything anymore. -
What changes needed, if changing cell service, or router?
I'm expecting the new S22 Ultra to arrive also. My Note 8 is a bit old. -
What changes needed, if changing cell service, or router?
I have switched from T-Mobile to Mint mobile, and that caused this issue. I have found a thread, that solved my issue. Basically, I needed to make another APN configuration that is meant for Mint, and now it works. Here is the thread with the settings: Thank you for your help. -
What changes needed, if changing cell service, or router?
Lan address did not change. I have switched cellular carriers, that is all that has changed. port :811 is there at the end. "Use an HTTPS port (Stunnel/NGROK) has to be checked? If I check it with the open port site, this address shows that is closed. What is interesting, that I can't access my... -
What changes needed, if changing cell service, or router?
I have redone the openvpn, and it connects to my phone, but ui3 won't show up, only the white startup screen. What else I'm forgetting here? -
What changes needed, if changing cell service, or router?
Thank you for that. I thought that is what I have to do, but I hate doing it. Specially on the phone part. I was hoping, that there is an easier solution. I think the I will put a hold on this, until I'll get my S22 Ultra in. -
What changes needed, if changing cell service, or router?
I have just switched cellular carriers and I can't see my cameras on my phone anymore. I'm using OpenVPN and UI3. What should I change? I have also noticed, that my WAN address has changed. I don't understand why, though. OpenVPN it seems like it is still connecting though. I should redo the... -
Sunshade/Sunshield for IPC-HFW4431R-Z?
What I was saying, if you cut a slit there, and put a hose clamp around the whole tube, it will close the gap and would tighten over the camera.