Search results
-
D
NVR5208-8P-4KS2E + IPC-T5442T-ZE Buffer problem, recording unusable.
use smartpss and check if problem still there, if not its a browser problem. if you want browser, you need blueiris or frigate. dahua and hikvision had always bad browser implementation -
D
Funny / Satire
https://m.youtube.com/shorts/1-UpCdet_Gs Not sure if funny or psycho -
D
IPC-HDW5442TM-ASE S3 questions
Dahua cams have no seal, no matter if oem or dahua branded to my knowledge Looks like the seller tested the cam and put these stickers on, sealed the box. i have some cams from german distributor with seal, but these were put on by distributor later. they only accept return with non broken... -
D
IPC-HDW5442TM-ASE S3 questions
did you put the admin/password sticker on ? never ever saw a sticker like that.. made in china looks also strange. -
D
Review-SD4A425DB-HNY 1/2.8" CMOS 4MP 25x Starlight Auto-tracking MiniPTZ
No, my cams are really dirty and you only see the dirt when the sun shines in the right angle on the cam. So depends on mounting height and placing. Most time it looks like its clean. I also have this on all turrets, so quite normal -
D
Flock installed LPR's without permits and has now been banned from operating in two states
Flock beats physics with AI. -
D
Dahua have varifocal 20-80mm 8MPx with 1/1.2" sensor!!!
what is the use of this camera ? hyper dof, polarlight, 80mm F1.1 ?? -
D
Dahua IPC-HDBW3849R1-ZAS-PV replacement
Not sure what your aim is, but identify someone at that height is impossible. Even if someone climb up the roof of the carport you wouldnt see the face. -
D
Dahua IPC-HDBW3849R1-ZAS-PV replacement
i would suggest to rethink everything. if you want overview there are better options like 180 degree. then put the two cams down on the carport edges to get something what can be used to identify someone. having such a huge roof in field of view will not work with infrared. night view must be... -
D
Anyone run 2 ethernet wires through the junction box grommet?
Thats not a good question. Would be too easy and the correct way. Looks like he dont need the box anyway because he installed the cam under empty soffit lol- duplo
- Post #6
- Forum: Camera Installation Questions
-
D
Dahua IPC unbricking / recovery over serial UART and TFTP
Looks like you can just put files on FAT32 sdcard and run sdupgrade upTool#sdupgrade [SD]:find 1 sd card! [SD]:mount /dev/mmc2p1 success! [SD]:start handle file /mnt/sd/web-x.squashfs.img Otp version is 0x00000000, Flash version is 0x00000000 upTool_commonSwRsaVerify run successfully! ##... -
D
Dahua IPC unbricking / recovery over serial UART and TFTP
has someone tried this on newer cams like S3 series?? Sun Aug 18 14:20:51 2024: Sending 'romfs-x.squashfs.img' file to 192.168.1.108 in binary mode # Sun Aug 18 14:20:54 2024: Failed ( State Error ). upTool#upTool#run dr eth0 link is up... Tftp print, localip:'192.168.1.108'... -
D
BackStreet-Surveillance on Youtube; Am I being toooo critical of the information he is giving?
Can someone help me to identify this guy here? I think its in the 60ft range !- duplo
- Post #53
- Forum: Pics & Videos
-
D
Britain is Lost
US need to send troops to UK fighting for freedom against these politicans ! btw here a photo of one of the isis guys from austria -
D
Britain is Lost
https://abcnews.go.com/International/2-arrested-planning-terror-plot-taylor-swift-show/story?id=112647175 and i thought the recent stabbing in UK has nothing to do with islam ?? because he was born in wales ? Though inspired by ISIS, the sources said investigators (from Austria) do not believe... -
D
Britain is Lost
why use a saw when you have a door ram FOR THAT THIN DOOR. the police in UK is full of tards. -
D
Blue Iris not retaining IP address after power loss
it has nothing to do with omada or tplink not sure why you always try to find a network problem. Like Mike says, its a blueiris problem. And if you search for it, you find people having the same problem without using any omada stuff. In theory it should be a good feature because people use...- duplo
- Post #23
- Forum: Troubleshooting
-
D
Blue Iris not retaining IP address after power loss
Omada Controller is a device or software solution which controls and monitors the network. Unifi has the same thing. If you have multiple access points or switches it really handy. Also you see which device is connected to which accespoint etc. I dont believe it has anything to do with the...- duplo
- Post #14
- Forum: Troubleshooting
-
D
Blue Iris not retaining IP address after power loss
On startup dahua and hikvision cameras have a different ip. This is due to tftp recovery process. After a few secs the normal OS is booting and it will use the ip which you have in config. You can watch this process if you plug in the cam directly into a computer and power it with 12v dc up you...- duplo
- Post #10
- Forum: Troubleshooting
-
D
Britain is Lost
Depends on what you get. I would take whole mexico in exchange for our muslims here. The islamization of europe got out of control. The sad thing is.. it looks like its unstoppable. -
D
Britain is Lost
Glad that you were never in sweden or germany. https://unherd.com/2021/04/swedens-migrant-rape-crisis/ https://www.bbc.com/news/world-europe-45269764 https://www.bbc.com/news/world-europe-53517022... -
D
Ir illuminator
there are some axton knock-offs from hyundai. not sure where they buy them, they are mostly selling rebranded hikvision. but hikvision dont sell this model they were also sold under SONY brand SNCA-IR40/Outdoor, Infrared Illuminator for Outdoor... -
D
Empiretech PTZ4K45X-AI settings
Even if you mount it higher at the actual position, it might be problematic. Cars tend to speed up after the curve. Sure it can do tracking of fast object.. but it might be problematic if its so close the the cam itself. The car will be out of view too fast. Not possible to mount the cam more... -
D
Empiretech PTZ4K45X-AI settings
Just test it. Lowering the target ratio will give you the "bad" target even if you want it further zoomed in. It might help you the near position, but will worse everything else. In theory it should work if it can see the whole car at Z1 when the object is near the cam If thats already the... -
D
Empiretech PTZ4K45X-AI settings
It can do that. But if it cant zoom out when the car passes the camera position, it is likely to lose the object. Normaly these cams are mounted higher than normal , even if the object passes near the position of the cam, it can look down and still be able to see the whole object when zooming out. -
D
Empiretech PTZ4K45X-AI settings
Looks like the camera is to near to the object. It loses the object, same as having too high target ratio. It needs to be able to zoom out. Looks like you are already at Z1 level, so it loses the object.