Search results

  1. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    Also, Thank you for your service:headbang:
  2. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    I did not know that. ill be scraping this wiring and getting the good stuff then. Thanks for the info!
  3. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    Thanks for the advice. I didnt check to see how close they were to the power cables but they defenitly ran parallel with coax cables and other ethernet cables. I wired them T-568A spec as per looking at the factory cables. and I did try the camera with other cables various lengths and different...
  4. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    Also forgot to add that I spliced and crimped the connectors myself. I still have 2 more cameras to install. 1 being the other side of the house and the other will be under the patio cover area.
  5. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    Solved: I'm so lost but i ended up running 1 more new 15ft cable and this last one connected just fine. I clearly dont see any kinks or abstructions but im glad this one worked. btw all the wiring came from the same roll that lorex provided. might be issues in the wiring from factory but...
  6. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    Oh makes sense. and I've ran 2 seperate wires thru the attic and both had no tears or were pinched. im truly stumped on this one tbh. I was wondering if it was interference considering it passes by a light fixture, other ethernet wires (whole house network wires) and the laundry room exhaust fan.
  7. Iridium1234

    (SOLVED)Lorex NVR camera setup issue

    SOLVED: CRAPPY WIRING OR MULTIPLE BAD CRIMPS? EITHER WAY I FINALLY GOT CONNECTION. Hello all! I'm at a standstill so I'm resorting to joining this wonderful forum:) skipping to the issue: Lorex system from costco. POE wired. I currently have 3 cameras installed and running well. 2 indoors...
Top Bottom