Search results

  1. B

    two drives split the recording locations

    yes would love that. thanks. I pm you the info
  2. B

    two drives split the recording locations

    yes would love that. thanks. I will pm you the info
  3. B

    two drives split the recording locations

    so how do I go about figuring out what is wrong. it is a clean machine except for bi .
  4. B

    two drives split the recording locations

    on this its a xeon e3 1225 21 cameras 2.1 mp but I am running them at 1080/1920. 15fps
  5. B

    two drives split the recording locations

    yes o course . its direct to disk. reduced to 15 fps and matched it to the iframe
  6. B

    two drives split the recording locations

    yes and I checked the drive and the clips are there. btw I have 12gb of memory on this machine
  7. B

    two drives split the recording locations

    i just clicked aux1,created a folder, and then went into the cameras and selected aux1 for its recording. doesnt seem to have helped much. still running at 100 cpu
  8. B

    two drives split the recording locations

    no clue what you mean. do you mean select aux1? that doesnt seem to have the ability to have new and storage folders
  9. B

    two drives split the recording locations

    My BI cant really handle my 23 cameras . I got a second drive to see if i split it among two hard drives bit i am not sure how to do that. any help would be appreciated.
  10. B

    Ivms4200/nvms7000

    In that one it isn't a 6700k. (Have that in another system) it is a i7 4970k. Can't seem to access the webserver at all. Running the v2 and it says in the instructions that it has one. Will call lts security where I bought the cameras maybe they can help. I am not sure what could be setup wrong...
  11. B

    Ivms4200/nvms7000

    These two are really the same software so I put them together. I unfortunately am moving away from blueiris and losing its ease of use and features do to the intense work on the cpu. I have 17 cameras running direct to disk with motion . Problem is its a day care so I can be getting all 17...
  12. B

    maximum cameras on BI

    hikvision 2.1mp
  13. B

    maximum cameras on BI

    paid version at at night it drops down into the 40s at most very often even lower .only have about 3 cameras recording then
  14. B

    maximum cameras on BI

    yes direct to disk. i7 6700k (which cost me a fortune). i haveto check about the hardware acceleration
  15. B

    maximum cameras on BI

    12 gb of memory which it never comes close to using. in motion although it is a daycare which during the day and when i have the problem it is basically continuous record.
  16. B

    maximum cameras on BI

    i am running a skylake i7 with 23 cameras at 15fps and it is bombing out too often at cpu 100%. I am going to have to switch to ivms if i can ever figure out how to set it up.
  17. B

    maximum cameras on BI

    I know that it technically can handle 64 cameras but I dont believe there is any computer that can run that amount. i am trying to setup a 30 camera system . Is there any computer that can run 30 cameras at 1080?
  18. B

    ivms pcnvr with two nics

    I am trying to get 4200pcnvr setup . I have all the cameras coming into one pc on a 10... domain with no gateway on that nic. I have a separate nic attached to my router with internet. trying to keep any camera traffic from being on the local network. How do I tell the server software to use...
  19. B

    Concerns with BI missing motion

    80% is what it was showing when i had them all at continuous . put them back to when triggered and the cpu is down to 35% How do i set the sensitivity and the contrast. i see people are walking by and it doesnt record it.
  20. B

    Concerns with BI missing motion

    its at 80% . no it was set to when triggered.
  21. B

    Concerns with BI missing motion

    nothing else was changed but a 10 minute gap?
  22. B

    Concerns with BI missing motion

    object detection would explain a 10 minute gap without that person showing in any camera?
  23. B

    Concerns with BI missing motion

    It wasn't previously on continuous . It was changed today it was previously on when triggered. here is the video at 22.16 the person just appears out of nowhere. not on any other cameras at all. a gap of 10 minutes on the same clip? View My Video
  24. B

    Concerns with BI missing motion

    it was set to profile 1. I dont think any specifics were made to the profile. object detection was on . sorry i thought i did post a record but i see it is just two of the trigger . here you go Any way i can cut out a piece of a clip? create a new clip that is just a few minutes of the main clip?
  25. B

    Concerns with BI missing motion

    profile 1 . which is the standard always record with motion. i never actively setup a profile. anyway i can export a piece of a clip?
  26. B

    Concerns with BI missing motion

    I believe object detection was on when the incident occurred . I turned it off based upon what you wrote above. Also it was changed to continuos to see if the files are being written but previously it was on when triggered.
  27. B

    Concerns with BI missing motion

    I also have the same issue. had a robbery and the person first appears when he is inside already then disappears. no recording of him entering the door which he must have and there is a camera trained on the door. I am using Hikvision cameras and they have the ability to prerecord ten seconds...
  28. B

    Question about risk with port forwarding

    On a ny decent router you can limit the incoming port request ip to his. Even if he has a dynamic they dont change very often and once you know how to change it it only take 30 seconds
  29. B

    cad design software pelco

    anyone have the pelco cad software? It seems to be gone from the website. thanks
  30. B

    Good source to buy IP items at

    Can I get a catalog . i have a few installs I need to dop soon. cant wait from china
Top Bottom