Search results

  1. R

    What make and break time are you guys using

    I currently have it at 1 and 60 for away and 1 and 10 for home...I don't think i'm benefiting from this the right way. It's not like it records for 60 seconds after trigger correct. It records for *break time* after there is no motion...so if the camera stopped sensing motion, it will stop after...
  2. R

    one of cams not showing up on alerts page

    please disregard.... mods please delete
  3. R

    4mm Facial recognition

    that is some good quality!
  4. R

    PLA related question, can't get over 15fps?

    yeah I usually unplug the wifi dongle when I switch over just to make sure
  5. R

    PIR event in Blue Iris?

    it's wired now via PLA. the sound sounds AWESOME with hikvision's android app. with blue iris... not so much :(
  6. R

    PIR event in Blue Iris?

    so what do I do? any suggestions? I do something wrong? edit: got it! you are right. I thought I set it at 8000, but I guess I never did... very odd. I went to the port window to take a picture for you and realized it was set to 80 and no 8000. with that, I got the microphone feature back, and...
  7. R

    PIR event in Blue Iris?

    yep, it's on 8000 which is what my camera uses (I prefer 4 digit numbers so I did 8000)
  8. R

    PIR event in Blue Iris?

    I'm getting: <IOPortStatus xmlns="http://www.hikvision.com/ver10/XMLSchema" version="1.0"> <ioPortID>1</ioPortID> <ioPortType>output</ioPortType> <ioState>active</ioState> </IOPortStatus> video setting:
  9. R

    PIR event in Blue Iris?

    yes, I have :8000 for it which is my camera's port number that I use to connect for video feed
  10. R

    PIR event in Blue Iris?

    can you guys tell me what PTZ camera is selected on there? mine won't work. I have Network IP: Hikvision/Abus I'm curious if this is because my 2432 is on version 1.5.0 I'm getting the output signal on the http://xxx.xxx.x.x/IO/outputs/1/status/ from inactive to active so I know that's...
  11. R

    PLA related question, can't get over 15fps?

    plugged it in, fps went to 20 in 5-10 mins... unplugged it and fps stayed at 20... oh well. tomorrow I should have a cable come in long enough that I can plug the computer in directly to the router. right now I don't have one that reaches it unless I take the one from geeya which it really...
  12. R

    PLA related question, can't get over 15fps?

    ok ok fine. let me plug it in lol just fyi, the geeya 801c is still at 20fps which is also wired in :P
  13. R

    PLA related question, can't get over 15fps?

    yes, but it was running on wifi an hour ago when I had 20fps too lol (and that's on a 5ghz network which is empty in my area. It's also 10 feet from the router across the computer room)
  14. R

    PLA related question, can't get over 15fps?

    Just got the TP-LINK 200mbps PLA adapters. They pair and work very easy, however I can't seem to get any better bandwidth out of them compared to my wifi. my FPS won't go over 15 with these whereas with the wifi earlier today I was getting 20 which is what I have it set as max... any ideas...
  15. R

    Blue iris app w/tasker support for android

    Mike, I've seen that and will try it out. I would prefer wifi, but geofence will do too. I'm curious on how it determines where u are continously though. And how center is set. Let's say it uses ur current spot to determine center of geofence. I guess inside the house it will use wifi to...
  16. R

    Any way to get 3mp 12mm camera capture license Plates?

    I'm not a 100% if you can adjust focus, but I'm certain you will need to manually focus it IF you can focus it. now that being said, my police car has 4 ALPR cameras on all 4 corners and they are actually rather low resolution, but it's in constant IR mode (never color IIRC) and contrast is...
  17. R

    CPU usage vs other NVR software... what comp to get for server

    I disabled write to disc, changed pre buffer to 3 seconds (60 frames @ 20 fps) and enabled the OSD overlay within the camera itself. This will probably do the trick... Now if I could figure out how to get OSD overlay on the Geeya 801c
  18. R

    Blue iris app w/tasker support for android

    Now how cool would this be... bear with me :) Tasker is an app that automates things and sends commands to your phone... some example would be: when it detects your wifi signal at the house, it can send a command to an app (has to be supported) to turn the AC on, or lights. Or it can give...
  19. R

    unique settings for night & day?

    either light sensor, or IR input of on/off (when IR light goes on, it switches to night mode) but IR sensor is controlled by the light sensor, so both would work. the light sensor would even be better actually :) it's one pet peeve I have about this device.... the IR light goes on way too soon...
  20. R

    how to prevent BI from recording when lights go on/off

    make time is always at 2 seconds. I do have a hot spot which is why it's triggering when lights go on/off
  21. R

    IP Address question - can't remotely login to blue iris

    ok few things... can you log in while you are connected to your network? let's say your IP locally is 192.168.1.79 (and that should be the only thing ending in .79 on your network) now in webserver settings make sure you activate a port. Let's do 5050 (go to settings > web server > check the...
  22. R

    how to prevent BI from recording when lights go on/off

    I don't have a security system. I figured I just take the extra videos... I delete them on regular basis anyways if nothing has happened
  23. R

    sounds not coming through camera, but instead from computer speakers

    how can I contact Ken (I think?) to troubleshoot this with him... because obviously something isn't right here as I can use the native hik app to communicate via the speakers on the 2432... but it's not working with blue iris
  24. R

    unique settings for night & day?

    There is... but it's based on time. Wish it had one based on IR output
  25. R

    2432 was lost signal after ~12 hours

    you're right. it was wireless.... could have been the culprit
  26. R

    2432 was lost signal after ~12 hours

    well I got the PLA adapter coming in tomorrow. Hopefully it will do the trick... still can't understand why the wired camera (the geeya) gave me problems though. It was happening concurrent with the hik
  27. R

    unique settings for night & day?

    Is there a way to set the camera so that I have day and night settings? I'd like to have it so that when the night mode triggers, the WDR changes values, the shutter changes etc etc I think this would be very useful, but I'm afraid there is no such thing.. I figured I ask anyways because maybe...
  28. R

    how to give mainstream for record and substream for live view on BI

    I see what you mean... so it's not something "smart" that I thought of lol...
  29. R

    Going crazy.. why is everything so slow even wired!?

    to add icing to the cake, all my devices are connecting to the 5ghz connection, but my desktop is not getting along with it and not connecting to the internet.... but here I am, posting from the 5ghz connection!!! Computer connects to lan from it (I can view the cameras), but not the internet!!!
  30. R

    2432 was lost signal after ~12 hours

    ok here's whats so crazy... I have a new router with great signal. everything was working just fine (like last night) until now both cameras I have are getting single digit FPSs again... especially the geeya which has always been great wired (20+ fps) is barely getting 8 now. the 2432 which...
Top Bottom