Search results

  1. M

    NVR5232-EL crash during playback

    I understand that you also used a single account for smartpss and the web page, so I would rule out a problem with simultaneous logins with the same account
  2. M

    NVR5232-EL crash during playback

    Unfortunately from the web page I can't see a menu where I can see the bandwidth, but from the local monitor of the NVR there is the appropriate section. I'll post a screenshot as soon as I can
  3. M

    NVR5232-EL crash during playback

    15 cams, most 4k and 5mp with cbr 4096 20 fps and they all run IVS by camera. There are 2 switches on the network that manage these cams, I don't know how to investigate. The cam network is a DMZ, separated from the LAN with a Sophos firewall with pfsense. My pc: 16 gb ram, i7 8700k rtx 3090...
  4. M

    NVR5232-EL crash during playback

    ok, I just ran an important test: I did a good few minutes of playback directly from the NVR's web page and it worked fine. I then ran the live broadcast on another device (dmss mobile) and suddenly after a while it crashed. In this test smartpss wasn't really used, so it's not the culprit...
  5. M

    NVR5232-EL crash during playback

    yes, the recording sub stream is also enabled
  6. M

    NVR5232-EL crash during playback

    yes, correct
  7. M

    NVR5232-EL crash during playback

    I confirm that the problem still persists even with the generic Empiretech firmware. The problem always occurs when playing back (particularly if I jump from one clip to another, even with only one cam at a time!) However, I noticed (just now) that following playback on smartpss the system...
  8. M

    AcuPick, QuickPick, smart search doubts

    Furthermore, even if OT, could anyone tell me how to set snapshots for each ivs event? I find a lot of conflicting information
  9. M

    AcuPick, QuickPick, smart search doubts

    Thank you very much for the answer, so it seems that I cannot use acupick because it is not supported by my cams. Thank you!
  10. M

    NVR5232-EL crash during playback

    Unfortunately the problem continues to occur even with the latest firmware directly updated online via the NVR. I try the generic one from Empiretech
  11. M

    AcuPick, QuickPick, smart search doubts

    Hi everyone. I am new to the dahua world and I have some doubts regarding the use and functioning of acupick, quickpick and smart search. I have a nvr5232-el with IPC-HFW2841T-ZAS and IPC-HFW3841E-S-S2. I have the following questions: 1) does the acupick function work if supported by the cams or...
  12. M

    NVR5232-EL crash during playback

    I note that the latest firmware available on the Empiretech website is different from the one available from Dahua and appears to be "generic". Change something? can I put it on my nvr?
  13. M

    NVR5232-EL crash during playback

    already done. I performed the online update directly from the NVR. Could it be that the smartpss version is not updated? I can no longer download it from dahuawiki
  14. M

    NVR5232-EL crash during playback

    only one camera at a time 8mp. But if it were my PC, technically the web page should still remain accessible, as it should also remain accessible from dmss (mobile app). Instead, for 10 minutes or more the entire system is unreachable.
  15. M

    NVR5232-EL crash during playback

    the nvr works the problem appears in the "playback" section of smartpss: apparently it works and I can access the recordings, but after about 10 minutes of viewing recordings or ivs events even of a single cam smartpss is no longer able to access the nvr and is offline. Even trying from the web...
  16. M

    NVR5232-EL crash during playback

    no p2p, only via local network. tried from other devices and same problem
  17. M

    NVR5232-EL crash during playback

    Hi everyone, I have a 5232-el NVR with 15 cams connected (they all run AI by camera). Everything works, but when I playback from smartpss initially no problem, but after 5/10 minutes suddenly the system is unreachable both from smartpss and from the web page. In reality the NVR still remains...
  18. M

    AI: error 500 and AI: error 200

    i have 5.7.8.0
  19. M

    GPU memory full with CPAI

    Hello everyone, in relation to my previous post about the CPAI problem with GPU I think I have found at least the cause. The dedicated GPU memory after some CPAI analyzes begins to "saturate" more and more and to go to the maximum without ever being reduced, it also begins to use traditional...
  20. M

    AI: error 500 and AI: error 200

    Hi, i have same problem with 2.1.9
  21. M

    CodeProject server goes offline with GPU

    hi guys, i have a problem with codeproject and blueiris. I have gpu usage enabled, but every time CP analyzes something it goes offline and then restarts, but if gpu usage is disabled it works but often the alarm is cleared and it tells me "occupied". What do you think I'm doing wrong? My...
    • michele5353
    • Thread
    • codeproject
    • Replies: 0
    • Forum: AI
  22. M

    blueirissoftware.com website down (2023.07.07)

    hello everyone, from what I understand the problem seems to have been restored, but I noticed that my blueiris goes into the evaluation version once a day and I have to enter the license again each time. I also noticed that it can't check for updates, so it's almost like it can't connect to the...
  23. M

    blueirissoftware.com website down (2023.07.07)

    Hi guys, how is the situation evolving? it still seems all blocked by me.. my blue iris is in evaluation version
View older results
Top Bottom