Search results
-
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Any other suggestions? Do other firmware versions exist? Is there any value retrying with 'brickfixV2CN' in step 3 ? -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Couldn't find a 5.3.0,... would 5.2.0 be ok? from here DS-2CD2332-I EDIT: Tried it anyhow,... looks like same failure. Tail end of /dav/fixup.sh [ INFO][MIN]TFTP: ################################################################################ [ INFO][MIN]TFTP... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Files as requested. -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Tried this and its failed on Stage 3 of 3 of the Enhanced MTD hack. The fixup_log.txt file shows: [Brick-fix tool] Initialising fixup_log.txt Payload dropped, rollback re-enabled Initialising fixup current status to stage1 [Brick-fix tool] Initiating reboot into min-system Checking that tftp... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I run dd-wrt and its disabled by default. Think I have everything I need,.. will start this shortly. -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Haven't done anything yet, but,.... after a few hours of being disconnected I thought I'd power it up to see if SADP would detect it and bizzarely, it seems to be running v5.2.5build 141201 and its all Chinese, this morning it was displayed as v4.0.8build 140610 - have no idea what's going on... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
So the 2CD2x32x firmware is ok on the 2CD3332-I device ? I've also noticed that when I power cycle it, it doesn't come up, i.e. not discovered by SADP, nor does it respond to ping - have read elsewhere of this also happening and if I leave it off for a while it then responds. I'll wait for a... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I was using SADP v2.2.1.100 Build20140710,.. have now updated this and its now picked up. It says its running 'software v4.0.8build 140610' ( 'min-system recovery mode' ?) and that it has 192.0.0.64,... and it is responding to pings when my PC is 192.0.0.128 (was pretty sure this wasn't the... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
No,... not seen in SADP,... last known address not responding,.. nothing from 192.0.0.64 while my PC was 192.0.0.128 Haven't done any of the brickfixV2 yet. Just your suggestions with the "first test". -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Thanks for the reply alastairstevenson,... am about to try your first test suggestion. Some extra strangeness, coz I didn't have enough of it before,... just reconnected it and viola it came up,... restarted from the web interface and its gone again. And yes, cables and different PoE ports and... -
J
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
Hi all, I've had a DS-2CD3332-I sitting in a box for a while, originally bought from eBay a few years back. Got it hooked up today and all was good, but then I did a restart from its web interface and its never come up again! SADP can no longer find it,.. the address I was using before the...