Search results

  1. L

    Access secure BI PC using Chrome remote desktop

    What ports do I need to allow on the BI PC's VLAN to allow me to use Chrome remote desktop to access it on the internal network? I already opened ports 443 and 3478.
  2. L

    2- IPC T180 display format differences

    Here is the view I see after cloning one of the cameras 3 times so that I have 4. This is on a 4:3 monitor. Here is what it looks like in UI3 on a wide monitor. Thanks for helping me.
  3. L

    2- IPC T180 display format differences

    When I clone my camera I get the black bars on the side for the clone which is different that your experience. I assume you are using a different 180 camera so I wonder if something there is the issue. I was running a 2 year old version of BI and I just updated and both versions do the same thing.
  4. L

    2- IPC T180 display format differences

    Okay thanks for checking on that. How did you do the clone? Did you just add a new camera and copy from the existing one?
  5. L

    2- IPC T180 display format differences

    Thanks
  6. L

    2- IPC T180 display format differences

    Does anyone else have 2 180 cameras? I wonder if that is just how BI handles a second camera. I am viewing UI3 on my TV with a Firestick and the silk browser and the second camera is about 1/2 the width of the first camera.
  7. L

    2- IPC T180 display format differences

    I did some more testing and deleted both cameras. I created the "bad" camera first and it has the wide format and then I created the "good" camera next and it doesn't. I created the second camera by copying the first and I also tried creating it from scratch and I get the same result. It seems...
  8. L

    2- IPC T180 display format differences

    I tried that a few times with the same result.
  9. L

    2- IPC T180 display format differences

    I coped the good camera and I still get black bars on the sides. Even if I set the second camera to the same IP as the first it still looks different than the first. Here is a screenshot in UI3. UI3 looks worse than the view in BI but BI still has the bars. This tells me it has nothing to do...
  10. L

    2- IPC T180 display format differences

    I deleted my third camera and that mostly fixed the resolution issue. I exported the config from the working camera, deleted and bad one and imported. I did seem to need to run the find feature again. After that the bad still is not displaying the same wide as the good camera. I set the bad...
  11. L

    2- IPC T180 display format differences

    This is the same as the working camera but here you go.
  12. L

    2- IPC T180 display format differences

  13. L

    2- IPC T180 display format differences

    You are correct. That is checked on the problem camera but it is grayed out so I can't uncheck it. I am using the sub stream on both cameras. Edit: I removed the sub stream and unchecked the Anamorphic and added the sub stream back and I have the same issue.
  14. L

    2- IPC T180 display format differences

    I have 2 of the IPC T180 cameras and one displays in a nice wide format in BI but the other does not. In the camera web interface they both show 4096 X 1800. They were discovered as Generic/ONVIF and RSTP H.264/H.265/MJPEG/MJPEG4. Does anyone have any ideas on why they display differently?
  15. L

    IPC-B5442E-Z4E new firmware and IVS not working

    After hard resetting it with the reset switch then the IVS started working. Thanks for everyone's help.
  16. L

    IPC-B5442E-Z4E new firmware and IVS not working

    Okay. That is a pain since the cameras are on a VLAN and resetting them will cause them to go back to a default network but I will try it and see what happens. Thanks. UPDATE Okay I set it to factory settings, updated the firmware and setup IVS and there is still no alerts working. Do the...
  17. L

    IPC-B5442E-Z4E new firmware and IVS not working

    In the IVS tab? No but this is also unchecked in another camera with older firmware and it is working.
  18. L

    IPC-B5442E-Z4E new firmware and IVS not working

    No, should I?
  19. L

    IPC-B5442E-Z4E new firmware and IVS not working

    I have a few of these cameras and I use them with BI. Recently one starting detecting motion all the time and I kept finding the video detection checked which I don't want since I use IVS with people and car detecion. I upgraded the firmware to the one dated 2023-12-21 which I downloaded from...
    • lcam
    • Thread
    • Replies: 8
    • Forum: Dahua
  20. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    Thanks for your assistance.
  21. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    Okay it does seem to auto track with the MD and SMD off. I don't know why it wasn't working before. I do see MD enabled again after I log back into the camera so you are saying that BI will enable that? To fix that I think you are saying to go to Video Detection > Motion Detection > Area and...
  22. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    It sounds like you are saying that I need to turn off MD and SMD. I have a intrusion box drawn on the Deep IVS tab so is that what you are talking about as far as the square in the corner? Should I add another intrusion box other than the one I am using?
  23. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    Does anyone see what I am doing wrong in this setup?
  24. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    Nope, when the SMD is checked I get false positives.
  25. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    Okay here are my settings: With these settings the auto tracking does not work. If I check the box on the motion detection tab then it auto tracks. I'm testing now to see if checking the SMD allows auto tracking and no false positives using ONVIF.
  26. L

    Dahua SD49425XB-HNR auto tracking and too many ONVIF triggers

    I have 2 of these cameras and the auto tracking works pretty good. I am using this with Blue Iris and motion triggers setup in BI. I want to make use of the IVS and ONVIF triggers in BI to help eliminate some false alarms. When I leave the settings alone in the camera and enable the ONVIF...
    • lcam
    • Thread
    • Replies: 8
    • Forum: Dahua
  27. L

    New Reolink Wired POE Doorbell Cam ?

    Thank, That's good to know. We just had the house built and I could have selected where I wanted additional Cat6 cables and I didn't pick the doorbell because I didn't know about the POE option. I can probably get a cable there but I'd rather not at this point.
  28. L

    New Reolink Wired POE Doorbell Cam ?

    Great! Thanks the the information. I'm not sure I can get a cable to the DB so I plan on getting the WiFi version so I hope it works the same.
  29. L

    New Reolink Wired POE Doorbell Cam ?

    I was thinking about getting one of these Wifi DBs and want to use it with BI. I read/skimmed most of this long thread but I don't think I read about anyone using this camera for triggers in BI. I know in the past that Reolink cameras don't work well with BI because of the FPS/Key issue but I...
  30. L

    BI TRIGGERS

    This is a very common issue and I went to an AI solution (Deepstack) to help with this and it works pretty good. I know there are other AI options now.
Top Bottom