Search results

  1. P

    Hikvision region code changer

    Actually I came upon this issue when I received these cameras last week in regards to setting up my gmail account in the web interface of my cameras. I could not add my gmail email address, it would not let me type in enough characters in the Username section. This is an issue that was caused...
  2. P

    Hikvision region code changer

    All sorted. CBX was great, he found the problem and rectified it straight away. With the cameras I purchased, Hikvision did not allow long enough entries for entering the file path, renaming the file was not enough, He had to place the file in another location on my computer that allowed a...
  3. P

    Hikvision region code changer

    I wish it was as simple as that for me. I keep getting a error message "File path is too long, please reselect" in Chinese. I've renamed it about 4 times, The last attempt I renamed to eng.dav and it still tells me file path is too long, please reselect.
  4. P

    Hikvision region code changer

    I used to use Linux as my main computer a few years ago. But have not dealt with Linux for a while now.
  5. P

    Hikvision region code changer

    Yes, it's complex. other have remarked how easy it was to do here on this topic, but I can't for the life of me work out how to flash the firmware. CBX is asleep now, I will wait till he awakens.
  6. P

    Hikvision region code changer

    Here
  7. P

    Hikvision region code changer

    I have the Region Code changer, trying to flash that onto my cameras.
  8. P

    Hikvision region code changer

    Do I just go into the cameras web page interface Advanced Configuration/system/maintenance/remote upgrade and select the firmware in there? Or do I have to use TFTP?
  9. P

    Hikvision region code changer

    One of the camera is 5.2.5 the other is 5.2.0
  10. P

    Hikvision region code changer

    How do I Flash camera with the "Chinese to English" File?
  11. P

    hikvision 5.2.8

    Thanks, I gather there's a link with instructions somewhere here on the forum how to do this.
  12. P

    hikvision 5.2.8

    Do you think if I downgrade the firmware it will rectify my issue with the rebooting camera? If so which firmware should I downgrade to? and how do I do that?
  13. P

    hikvision 5.2.8

    I just recieved a 2332i with 5.2.8 and it dont work as it should. I live in Australia, camera purchased from a supplier in China through aliexpress. the problem is, the camera shuts down after 4 to 5 minutes, 30 seconds to a minute later it starts up, only to repeat the shutdown cycle over...
  14. P

    How to run network cable for camera?

    Thats a great idea with the cable. How did you mount the camera onto the drywall?
  15. P

    High CPU Useage on 22 Camera build system

    Having Direct to Mode set, does this mean the footage is contantly being recorded to the hard drive or does it only record when motion is detected with this feature set?
  16. P

    High CPU Useage on 22 Camera build system

    My computer is a Intel i7 4770 3.40GHz CPU with 16GB or ram running Windows Server 2012. A SSD with and Sata 1 Gig hard drive, running Blue Iris I eventually plan to run 5 hikvision cameras and one Foscam Camera at the highest resolution possible.
  17. P

    High CPU Useage on 22 Camera build system

    Thanks fenderman. Is this setting suggested for the iframe only if your using Direct to Disc?
  18. P

    High CPU Useage on 22 Camera build system

    I also tried playing about with the Direct to Disc Mode and didn't see any difference with one of my cameras. In fact the Blue Iris text overlay was still showing on the footage after I selected Direct to Disc for that particular camera. Do I have to select it for all cameras for this to work?
  19. P

    High CPU Useage on 22 Camera build system

    I found the iframe setting. I own a Swann ADS-446 and a Foscam FI9805W Camera, I've got a Hikvision due to arrive in the post tomorrow, eventually all cameras will be replaced with Hikvisions. I see on the Swann it's called iframe and it's currently set at 50 Iframe The Foscam I presume...
  20. P

    High CPU Useage on 22 Camera build system

    Where do I find this iframe settings your talking about?
  21. P

    Blue Iris Tools - Weather Overlay, Watchdog & more!

    Ignore my last post, I just found the reason why I had Macro1. It's all working now.
  22. P

    Blue Iris Tools - Weather Overlay, Watchdog & more!

    Hi, I'm trying to setup the weather features on this app. I followed the step by step instructions. When I key in %1 to add the macro in Blue Iris I only get a text saying "Macro1"
View older results
Top Bottom