Search results

  1. C

    Two POE cameras (most likely Dahua or Andy) off one ethernet cable - best method

    In for the ride. I do know a coupler will work for a single line with Poe. A splitter will work for your situation...but...not sure about the transfer of bandwidth ( possible degradation), and same issue perhaps with Poe.
  2. C

    New system, much better CPU performance but the CPU indicator in BlueIris is wrong

    go to the blue iris settings. click on "other" . in the lower right you will see "cpu usage factor". you can dial in the correct setting according to your actual usage in task manager
  3. C

    New Home Wiring: Cat6 or Cat5 premade cables

    you never know about the future...go with cat6 everywhere...and in a few places you have not thought of yet
  4. C

    IP camera over the internet?

    This works better than perfect: ZeroTier – Global Area Networking. One example of how to use it
  5. C

    Dual NIC setup on your Blue Iris Machine

    Yes. Basically same setup that I have. I simply added wifi for wifi camera's and 10Gbe nic for my servers. If I used vlans, setup would be more straight forward. But, I don't quite understand vlans.
  6. C

    Dual NIC setup on your Blue Iris Machine

    A little convoluted...but not complicated. Without the 10 Gbe intranet to my servers, set setup would be much simpler. Without the Wi-Fi camera's even more so
  7. C

    Dual NIC setup on your Blue Iris Machine

    A work in process. First I had to separate from att. Nothing but issues with my computer and att switch. Then I needed 10 Gbe to my servers. Of course, a couple of ap's. Now, my Nest (argh) doorbell took a crap...so let's add a camera...or 2...or 3. Then I decided I needed a couple of wi-fi...
  8. C

    Dual NIC setup on your Blue Iris Machine

  9. C

    Dual NIC setup on your Blue Iris Machine

    full diagram is forthcoming
  10. C

    Dual NIC setup on your Blue Iris Machine

    thanks to @Flintstone61, I have enclosed a very rudamentary diagram of my network. I did not include the nec switchs. there are no vlans
  11. C

    Dual NIC setup on your Blue Iris Machine

    I too have an asus router. in the router i keep my main (internet ) set to dchp. router address is 192.168.50.1. main computer (blue iris pc) nic ip is set to 192.168.50.150 (static) (mask: 255.255.255.0, length:24, gateway: (to the internet): 192.168.50.1 note: the internet comes into the...
  12. C

    what is your RAM use with cameras disabled? with all cameras active? with cameras unplugged?

    this is with 11 cameras and HA is enabled
  13. C

    My Google Apps will no longer be free - any viable alternatives out there

    Not certain this is what you are looking for, I have used these guys for business and personal for the last 25 years...
  14. C

    NAS for Dahua Camera through VPN server

    having just woke up and a little fuzzy eyed, try looking into Zero Tier for your "vpn". I use it with a separate nic ( separate IP , does not see internet) on my blue iris machine and all of my footage goeas to my nas (TrueNas)
  15. C

    Newbie from USA

  16. C

    Three Dahua Bricks... Is There a Trick to UNBrick?

    Good to know. My cameras are set up similarly. A 2nd nic in BI pc going to an 8 port unify switch. The one problem I have is this switch refuses to be re- adopted by the Unifi Controller. The adoption only lasted a few months. Mute point as I am not changing the port management settings any...
  17. C

    Three Dahua Bricks... Is There a Trick to UNBrick?

    BV-Tech has some interesting options,. https://www.amazon.com/gp/aw/d/B08MWYZMLW/ref=ox_sc_act_image_28?smid=A2PM09KSZ036SU&psc=1
  18. C

    Three Dahua Bricks... Is There a Trick to UNBrick?

    Even more reason to Daisey chain several smaller fanless units.
  19. C

    Three Dahua Bricks... Is There a Trick to UNBrick?

    https://www.fs.com/products/90131.html?currency=USD&paid=google_shopping&gclid=Cj0KCQiA8vSOBhCkARIsAGdp6RRkgbsgNEXE7Wk11MRN2tGW0sNg5U6FRXCpN1ELYUdnh52FOkKuqqQaAhb7EALw_wcB
  20. C

    Three Dahua Bricks... Is There a Trick to UNBrick?

    one more for the "arp -a" command. on your pc set one of your nics to 10.10.10.1 (for instance) . bypass the poe and use a poe injector (if you have one). plug camera into nic. type "arp -a" into the command prompt window. )in the search bar simply type "cmd" and window will come up. you will...
  21. C

    ds-2cd2047g1 and a Normal looking junction box

    You could always get a round plastic junction box and a solid cover at Lowes or home Depot. They also have the plugs you need. Use sheet metal screws or something similar to screw directly into the solid cover. Pre-drll the holes. Just make these holes smaller than the screws. Make sure to get...
View older results
Top Bottom