They are listed as indoor, I used one for an exterior mount under a gable and it has worked out fine so far.
They are plastic not metal like the one you linked to.
Hikvision DS-1258ZJ Bracket Wall Mount bracket cctv accessories For HIkvision Dome Camera DS-2CD2132-I is what I have used.
If you are interested I have an extra I didn't use that I'd let go for $10 US plus shipping.
Cat seems to be more avoiding than terrorized.
Maybe it's because he knows he can out run the fat boy. :D
Either way I'd want to know what was up with the guy...
I have a DS-2CD2532F-IS coming this week, need to order a card and would love to hear more about which cards are working etc. with the Hiks.
What file format are these cameras using with them?
?
I can't comment on which web components versions were installed at the time but I was able to access both the camera & NVR web interfaces when I was running 2.38 with 5.16.
FWIW, my 5.16 cams all had the CBX fix if it matters.
Have you taken 2.39 for a shake down drive yet?
I'd be very interested in your initial impressions.
I just finished loading the 2.39 Beta and was poking around in it as I set up the cams that were flashed with 5.20.
I'm not sure what to think about the "frame rate set as 8 continuous /15 event"...
It was offered to those who previously purchased the CBX region code changer.
http://www.ipcamtalk.com/showthread.php?473-Hikvision-region-code-changer
http://www.ipcamtalk.com/showthread.php?890-5-2-0-Patch
Different world views, home owner vs network engineer where fail safe & zero defects is a job requirement.
I lean toward Nayr but often have to live with home owner.
Correct me if I am wrong...
Virtual host was introduced in NVR firmware 2.39.
The release notes on NVR firmware 2.39 state that it requires camera firmware 5.20.
As congruence between camera and NVR interoperability continues I am assuming firmware compatibility requirements are a trend that...
The problem for me with some of the possible solutions is not knowing if they work.
I'd be more interested in the
HDMI Over CAT5E / CAT6 Extender Wall Plate (Pair) w/ Built-In Backward IR Channel - Single Port (1P) - White
...but I don't know if the NVR's HDMI will work with passive HDMI much...
A clusterf$ck of programing for sure...
The newer NVR firmware seems to have began closing this gap but you will need the neutered 5.20 firmware on the camera.
I can't believe more CBX region fix customers haven't stepped up to ask for the fixed 5.20 firmware than what's been reported.
Are...
It's a live view of a single camera stream, the NVR is pulling 5 streams currently.
I'd like to upgrade the firmware to 2.39 but don't want to upgrade the cameras to 5.20 (required) due to the limited traversal of fields in that version.
I just noticed my TV has a VGA port, I'm going to try a couple of these.
http://www.newegg.com/Product/Product.aspx?Item=9SIA3XM1MR8797&cm_re=vga_extender-_-9SIA3XM1MR8797-_-Product