Search results

  1. D

    PIR wiring

    You nailed it. My NVR dont support it. Damn.. thanks everyone for helping. Greatly appreciated. /thread
  2. D

    PIR wiring

    No. Not myself. It came like this from the seller. It is upgradeable but that sounds like a pain at this point in time.
  3. D

    PIR wiring

    It wouldn't let me have an input to begin with. Lol the drop down menu was blank. ZERO INPUT DETECTED. Sorry but caps is needed. The NVR sees ZERO inputs. - posted from android mobile.
  4. D

    PIR wiring

    That wire size was chosen for a reason. Bigger wires create less resistance, heat and less voltage drop over distance AND they dont break on me like thin wire does lmao. There is a box that says "Enable Alarm Input handling" which i did enable but other than that i have no idea. I have...
  5. D

    PIR wiring

    Tried NC, NO and Direct Bridge. Attached picture "Result.png" is what happened to ALL configurations tried. NVR does not detect any inputs or outputs even after reboots. What now?
  6. D

    PIR wiring

    yep. maybe it doesn't work with an NC configuration. or my NVR doesn't let me use alarm IO. ill read the manual while awaiting for any replies.
  7. D

    PIR wiring

    Yes i supplied the correct voltage and amps, Yes i tightened them properly, I used solid core wire, I used NC configuration on the PIR output, Why is the NVR not letting me add an alarm input or even detect anything.... YES the motion sensor works fine so its not the sensor. I know it is not the...
  8. D

    PIR wiring

    Yep got my own 12v dc adapter and tested the sensor without the nvr and cool 110 db built in siren if i needed it but ill turn that off if used with NVR. Ill keep ya updated when i wire it and get it working. Thanks guys.
  9. D

    PIR wiring

    OK guys. Short and simple. Cameras are fully stable now, No more grainy or auto-revert happening. I got these 2 sensors. Please diagram how to connect to NVR. my NVR has 4 in and 1 out. there is 2 grounds for the input and only 1 ground for the output. Please. I need a diagram i don't want to...
  10. D

    PIR wiring

    Seems to be holding that specific setting now. lets see how long this time. thinking its a 1 off. Haven't got the sensor its coming from perth so no point updating until another 3 days. ill report back. p.s its been 1 day and no grainy default image settings yet
  11. D

    PIR wiring

    Guys.... There is barely any document on the alarm in/out and PIR documentation with the NVR so im skeptical on putting wires in the back and maybe blowing something. The original plan was to use 2 or 3 PIR sensors and use them on the side of my house and maybe 1 in the front yard but its making...
  12. D

    PIR wiring

    Outdoors. I ordered another PIR that states its standalone and CAN output sirens/lights/aux at 3amps 12v so it has the relay built in and was only $30 plus free shipping. I know im confusing you but just please wait until i get this other sensor. Ill bridge IN1 and G if i get time. just very...
  13. D

    PIR wiring

    Ill keep it short. Has to be like the one in the link, them square ones. It also needs to work with my Hik NVR 7600 and i also want a sensor that can turn on a normal relay, the relays i have need around 300mA though... i could use logic level relay which is 50 mA also. Just need help with the...
  14. D

    PIR wiring

    i failed so hard lol i bought this S5317 Economy PIR Detector with 20kg Pet Immunity - Altronics powered it with 12v DC and it worked but it doesn't have the power to turn a relay on and needs some extra parts so on its own its useless. the voltage was like 3mv at the alarm output contacts when...
  15. D

    PIR wiring

    plenty of info to read. i should buy a sensor though cause im a hands-on learner with certain topics. ill see what i can come up with. thanks guys!!! ill try to post an update soon. promise!
  16. D

    PIR wiring

    so i supply power to the pir and not NVR. hmmmm so the ground of the pir goes to the rear panel or the power source? apparently the pir works by detecting a sink in voltage on ground thats why im questioning it. 12+ in to red wire on pir, ground on pir goes to rear panel, other wire is the...
  17. D

    PIR wiring

    that is confusing me more. most pir circuits have 3 terminals. i might need a diagram in mspaint or something. i have wired up relays yet i am puzzled by your post. and yes i will not use the alarm output ground for input ground lol already knew that. but please assist more, thanks!
  18. D

    PIR wiring

    Hey guys I attached a picture of my rear alarm panel on back of NVR, it is a 7600 series. It was drawn in paint lol anyways could someone post a diagram of how to hook up 4 PIR sensors to this panel? I don't want to blow the NVR or damage anything since not much of the manual states much info...
  19. D

    Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017

    While true there are no shortages, My setup is never across WAN but if there is a serious WLAN id update ASAP. Its a risk im willing to take. Also thank you for that link. My cams are G1 it appears from that portal link. i use DS-2CD2T85FWD-I8 which comes under 2XX5 on the firmware section also...
  20. D

    Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017

    Whats the g1 and r6 mean? Im not updating unless theres a vulnerability or cool feature but curious.
  21. D

    How to backup IPC and NVR settings?

    so the NVR or IPC import will read the file as a binary regardless of the extention then. i wont have that problem as im keeping this unit and cameras for a very long time. good to know though. thanks for helping guys!
  22. D

    How to backup IPC and NVR settings?

    ok well did i do this correctly. NVR side: exported the .bin file from the system management tab and then went to the camera ip export and exported a .xls file and after that i logged into each camera through web gui and got the device parameter file which let me choose a format so i chose .txt...
  23. D

    How to backup IPC and NVR settings?

    That makes sense BUT why does it have like 10 formats. Which do i use? I have done the nvr part and its default is .bin and for ipcam export inside nvr is .xlms Why is there no document on this? And does this backup including motion detection grid square placements and video audio settings?.
  24. D

    How to backup IPC and NVR settings?

    Yes 7608NIK2/P Hmmm so should i log into each cam and export or do it from nvr web gui. I want ALL settings backed up. Every single setting.
  25. D

    How to backup IPC and NVR settings?

    Hello again. I bought a 16GB Flash drive solely for 'config backups'. What is the best reliable way? NVR directly, Web GUI or iVMS4200? And if i use web GUI it asks for a file format and i never know what to put for it. Im fairly tech savvy but this hikvision isn't really that obvious lol...
  26. D

    Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017

    Yes i agree, Only update if your after new features or a specific bug fix you wanted fix. exploits don't matter too much if your on LAN, WAN is where its risky.
  27. D

    Annoying problem...

    Thanks mate! My setup consists of authentic Hikvision DS-7608-NIK2 with 8 PoE ports and at the moment 3 8MP Authentic Hikvision cameras - DS2CD2T85FWD-I8. I use the NVR, the Web GUI and iVMS4200 for doing setting changes but i barely touch the NVR. i use Web or iVMS mostly. The NVR is managing...
  28. D

    Annoying problem...

    Hi guys When power to the NVR goes out some of the settings goes back to original position. for example when i added the scheduled switch for day and night it remembers the settings but that 1st drop down box called "Scheduled-switch" doesnt stay if power goes or even shutting down the box...
View older results
Top Bottom