Search results

  1. Billiboy

    UART connection to recover Hik cameras

    Perhaps the connection is not soldered, so I wanted to have a picture where you can recognize what synonymous. I think the connection is very far away from Prozessor chip, but I can also be wrong.
  2. Billiboy

    UART connection to recover Hik cameras

    I use this UART with Win 10, and no Problems on CAM´S an Recorders. https://www.sparkfun.com/products/12731 My suggestion would be, you try it times with another Terminal Programm and another UART. Otherwise I have also no idea. I also had times cryptic characters on a camera, which was...
  3. Billiboy

    UART connection to recover Hik cameras

    You are sure that it is the right connection, you can unfortunately recognize in the picture nothing since it has bad quality. I have here a DS-7604HI-ST / A which has 2 connections. One is near the realtek chips, the other is near intersil chip. The Intersil chip is the right one. It...
  4. Billiboy

    UART connection to recover Hik cameras

    @alastairstevenson this Device has no SUB D for RS232 @aryjrbnu You can show a picture where you pick up the UART on the Mainboard
  5. Billiboy

    UART connection to recover Hik cameras

    Can you say more exactly which adapter you use? Perhaps it is the driver of the adapter. Try a different terminal program.
  6. Billiboy

    Bootloop DS-2CD2132F-I

    I have found the problem, the motherboard does not find the camera module. This resets them and it comes to the bootloop.
  7. Billiboy

    UART connection to recover Hik cameras

    I use Tera Term for the console. If the setting is wrong, you can also get an incorrect display. Use these settings.
  8. Billiboy

    Bootloop DS-2CD2132F-I

    Hallo My DS-2CD2132F-I has a bootloop. Sometimes it takes off and I come to the web surface, can then see the settings and suddenly booted again. Flashed Firmware is IPC_R0_EN_STD_5.3.0_150814, the Cam is an EU model. Does anyone have an idea? thx billi U-Boot 1.3.4-121219 (Apr 8 2015 -...
  9. Billiboy

    UART connection to recover Hik cameras

    I've checked on the net at times other cams. In the link the cables are reversed as it looks. Everywhere it's like in your picture. Thanks for your quick response. I will definitely soon open an extra contribution, I have 2 cams where I might need help.
  10. Billiboy

    UART connection to recover Hik cameras

    I have seen the plugs are different sizes. Then for each device the availability of RX TX GND is different?
  11. Billiboy

    UART connection to recover Hik cameras

    Hello I found a post with another assignment. Which is the right now? https://www.ipcamtalk.com/showthread.php/6356-Manual-Create-console-serial-access-to-Hikvision-DS-2CD2032F-I?highlight=serial+console Sorry for my bad English cu billi
View older results
Top Bottom