Search results

  1. J

    Any suggestions for night exposure settings to improve this fox capture?

    Here's a fox and raccoon dining together. A raccon had dumped some birdfeeder seed from about 20ft above about midnight. I knew there would be activiy later, so pointed my 25X PTZ at the spilled seed area.
  2. J

    Dahua NVR One Cable, Two IP cameras

    Here's a video that shows how to connect two PoE cameras via one Cat5e cable to an NVR.
  3. J

    Wyze 3 - RTSP Support

    This is apparently a way to use RTSP without changing the Wyze firmware.
  4. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    Yes, I did not notice that. Sorry, ignore my post on 3rd Gen. It was about green feathers camera.
  5. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    You have not said what size and type of bird box you are going to use. So this may not be applicable. I remember the thread below from last year which may be of interest. The camera used is not wifi and has been discontinued...
  6. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    Perhaps your wifi works without cloud because you have a 1st or 2nd Gen and are not using a 3rd Gen Green Feathers camera. https://help.green-feathers.co.uk/support/solutions/articles/43000602161-3rd-gen-wi-fi-bird-box-camera-setup-on-android-ios-ncip3wf-#Screen-capture-video-of-the-setup
  7. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    If you find a camera that is wired only but want to use wifi, you could try using a wifi bridge/repeater similar to this...
  8. J

    Amcrest Surveillance Pro v2: all cameras offline?

    @YOW You could try this if you are comfortable with it. https://amcrest.com/forum/ip-cameras-f18/amcrest-surveillance-pro-login-fail-t2875.html Or try contacting the Amcrest escalation team as mentioned in the previous post.
  9. J

    Amcrest Surveillance Pro v2: all cameras offline?

    Read through this thread. You are not the only one with the ASP V2 P2P remote camera problem. Maybe you will find a clue there. https://amcrest.com/forum/amcrest-surveillance-pro-f26/adding-cameras-to-asp-via-p2p-t15137.html You could also try using a local VPN at the remote LAN, or port...
  10. J

    SD flash card cameras, no Wi-Fi---- IMPOSSIBLE FIND

    The quoted text above the === line above was my post. Your response is below that line. I do not think you understand my post and would not believe it in any case. I consider it a hopeless situation not worth me trying to explain it further.
  11. J

    SD flash card cameras, no Wi-Fi---- IMPOSSIBLE FIND

    @jeffjot One possibilty for the "IMPOSSIBLE" camera: Get a $44 IP3M-943W from amcrest.com or at ebay from amcrestdirect. You would need a router and phone or PC for initial setup, but then install it anywhere without a router. It should just keep recording motion events to SD card in a loop...
  12. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    Green Feathers appears to provide substantial information and help at https://www.green-feathers.co.uk/ An example: https://help.green-feathers.co.uk/support/solutions/articles/43000567362-making-an-rtsp-stream-for-a-wi-fi-or-wired-ip-bird-box-camera
  13. J

    Bird box camera uses cloud p2p - possible to configure and use locally?

    Have you tried to find a rtsp url? Google xiongmai rtsp url, and see if you can find something to try.
  14. J

    360 cameras with dewarped streams?

    Perhaps EMPIRETECANDY could provide a price for Dahua DH-IPC-EBW812A0N which does have On Boatd Dewarping as indicated in link below. https://dahuawiki.com/Fisheye/On_Board_Dewarping
  15. J

    360 cameras with dewarped streams?

    Blue Iris has support for dewarping, so you may be able to use a less expensive fisheye camera. See link below. https://ipcamtalk.com/threads/blue-iris-5-fisheye-dewarping-capable-hardware-recommendations.45468/
  16. J

    Access 10.x.x.x subnet from 192.x.x.x

    So are you saying you cannot use the camera Web UI with a Hikvision camera connected directly to your router LAN with no NVR involved?
  17. J

    Access 10.x.x.x subnet from 192.x.x.x

    @whobutni I posted here last night . Did you see it? Maybe not because it was the last post on thread page 2. The link in it is from the Dahua wiki about connecting Hikvision camera to Dahua NVR
  18. J

    View videos from Hikvision ip camera - OK with IE, but not on Edge

    A while back, Microsoft announced Edge Internet Explorer Mode. Go to this link for details: What is Internet Explorer mode? I've used it before for camera Web UI that requires plug-in.
  19. J

    Access 10.x.x.x subnet from 192.x.x.x

    Another method to use camera Web UI: Use a switch to connect your cameras to the same LAN that your NVR is connected to. Then add the cameras to NVR using Manual Add. Then you can use the camera Web UI without the NVR being involved. See Description section in...
  20. J

    SD42212T Dahua PTZ Event Preset Time

    On that page, try changing Activation to Tour, and have a tour setup to go to a preset with the desired duration.
  21. J

    Backwards Compass

    "East and West are flipped" is probably because the camera is using a spherical coordinate system and not a horizontal coordinate system. You will need to use a formula for your camera to convert to the compass direction.
  22. J

    Amcrest camera NAS to OpenMediaVault

    Maybe there is something here that would help: https://support.amcrest.com/hc/en-us/articles/360057795691-NAS-Connection-Using-a-QNAP-Storage-Devices https://support.amcrest.com/hc/en-us/articles/360057310652-NAS-Connection-Using-a-Synology-Storage-Devices
  23. J

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Maybe this thread could help with recording anf viewing IVS events. https://ipcamtalk.com/threads/smartpss-and-ivs.47103/
  24. J

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    First connect NVR to LAN router, and add NVR to Dahua SmartPSS program on PC. Do a google search on "SmartPSS export clip". You will find videos and articles on how to do it.
  25. J

    poe injector jerk ?

    superpatpat, 1080p = 1920x1080 = 2MP Four cameras using 1080p@30fps is the decoding limit specified for your NVR to display the cameras on your monitor. Perhaps you are reaching the NVR limit. You could reduce your 1080p cameras to 20-25 fps and see if it helps. If recording the four...
  26. J

    poe injector jerk ?

    I suggest the simplist solution would be changing the settings on your four cameras to 1080p resolution and 30 fps. Then see if it's acceptable.
  27. J

    Where should i start to troubleshoot this problem?

    tubac, If you get a wall wart, try one with output of 12V DC 3A which is specified in your camera Technical Specifications doc . This is the one we used, but did it not help...
  28. J

    Where should i start to troubleshoot this problem?

    See my previous post here earlier about the SD49225T-HN Frequent Restarts thread. I have experience working remotely with one of those defective cameras. Things tried were new cables, 12V 3A power supply adapter, 30W and 60W poe injectors, etc., with no change. The mentiond thread has some...
  29. J

    Where should i start to troubleshoot this problem?

    tubac, Your problem sounds similar to one occuring a couple of years ago. Maybe you somehow ended up with one of the bad cameras. See SD49225T-HN frequent restarts
  30. J

    What are the reasons as to why certain browsers mostly work while some do not on Dahua GUI?

    I remember reading that "plugins" were used because they provided the best video performance in a Web UI. Your plugin firmware should work fine with Edge. Load the camera plugin login page in Edge, click ... at upper right, More Tools, Reload in Internet Explorer Mode. That is now...
Top Bottom