Search results

  1. redfive

    Latest New NVR4XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    Yeah, you are right, let's wait and see.....
  2. redfive

    Latest New NVR4XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    Well, what about the language ? :) (perchè se è solo in cinese, sono volatili per diabetici ... :) )
  3. redfive

    Pro AI NVR latest new firmware NVR5XXX-I_MultiLang_V4.001.0000000.2.R.200814.bin

    Chrome with ie tab extension ?
  4. redfive

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    Fast test on a couple of B5442E-ZE, Smart IR seems working fairly well (even a bit too aggressive, IMHO ... :) ) Clicking on the "Conditions" button, for a fraction of second, appears a "Focus & Zoom" menù But then it suddenly disappears This happens only the first time that the 'Condition'...
  5. redfive

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    I heard about a little delay, should be ready/available tomorrow
  6. redfive

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    Great !! No news, for the fixed lens ?
  7. redfive

    VPN Primer for Noobs

    So, why not setup WireGuard on RPI ? Consider also the battery lifetime, and other advantages ...
  8. redfive

    VPN Primer for Noobs

    You can put the ISP router in bridge mode ( or pppoe passthrough, if allowed), and manage the whole network via the edgerouter, you may lose the WiFi of the ISP router (if there, but also not, depend on how you configure the edgerouter-x) , or simply use the edgerouter as VPN box, forwarding the...
  9. redfive

    VPN Primer for Noobs

    If you put a VPN router behind the ISP router, you have to simply port-forward the required port
  10. redfive

    VPN Primer for Noobs

    IPTunnel ??
  11. redfive

    VPN Primer for Noobs

    This is for a site-to-site IPSEC, not remote access. Personal advice, buy an Edgerouter -X, put it behind the ISP router, and install WireGuard
  12. redfive

    DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    Open the web ui of the NVR, (use IE), then Settings, Camera, on the right of each camera,you should see the link for access the camera via its gui, on the NVR, make sure that under Settings, Network, TCP/IP , virtual host (at the bottom) is checked.
  13. redfive

    DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    Download link, in the first post (should work ...)
  14. redfive

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    From B5442E-ZE With this fw
  15. redfive

    User name and password of IPC-HFW5231E-Z12 after reset?

    IIRC, with older firmwares, admin/admin, otherwise, after a factory reset, the camera should be re-initialized, and should ask you to create the password
  16. redfive

    Review: Dahua HFW5442T-ASE 4MP Starlight+

    Sometimes, I use this, on the digital inputs of the NVR
  17. redfive

    Review: Dahua HFW5442T-ASE 4MP Starlight+

    MD with SMD seems working well, IMHO (and doesn't fill up the folder IVS pic, if SmartPSS is used :))
  18. redfive

    Latest New NVR4XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    There is a newer version, here.
  19. redfive

    IPC-T5442TM-AS , IPC-T5442T-ZE Latest new Firmware Volt V2.800.0000000.17.R.200620

    Sure that the firmware is for these models ? The 0620 is DH_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.0000000.17.R.200620.bin, while the 0717 is General_IPC-HX5XXX-Volt-MCU_V2.800.12JW000.0.R.200717.bin
  20. redfive

    IPC-T5442TM-AS , IPC-T5442T-ZE Latest new Firmware Volt V2.800.0000000.17.R.200620

    Si, puoi installare la nuova versone, ma se scrivi in Italiano, dubito che Andy ti risponda ... :) Yes, you can upgrade to the new version, side note, if you write in Italian, I doubt that Andy will respond ...
  21. redfive

    IPC-T5442TM-AS , IPC-T5442T-ZE Latest new Firmware Volt V2.800.0000000.17.R.200620

    @c_snyder where did you see that fw ?
  22. redfive

    Something better than IPC-HFW8232E-Z?

    @Justintoxicated Did you see this ?
  23. redfive

    Something better than IPC-HFW8232E-Z?

    For the 8232E-Z, this, is the latest fw available
  24. redfive

    IPC-T5442TM-AS , IPC-T5442T-ZE Latest new Firmware Volt V2.800.0000000.17.R.200620

    There is the link for IE (virtual host) if the cameras are hooked up directly to the NVR PoE ports ...
  25. redfive

    IPC-T5442TM-AS , IPC-T5442T-ZE Latest new Firmware Volt V2.800.0000000.17.R.200620

    SMD is still there .... :)
  26. redfive

    Something better than IPC-HFW8232E-Z?

    I have to agree with the previous comments, I 've a couple of 8232E-ZE, and some 5442E-ZE/5442TM-AS, and honestly, I find, overall, better the second ones (the 7442 is even better ... :) )
  27. redfive

    IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.16.R.200529.zip

    Seems ok using firmware V2.800.0000000.17.R, Build Date: 2020-06-20
  28. redfive

    IPC-HX4XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.16.R.200529.zip

    So, bullet as well as turret (such as B5442E-ZE and T5442TM-AS) , will use the same fw ?
  29. redfive

    DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    You may also try google chrome with IE tab extension
  30. redfive

    DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813

    Did you try a factory reset, then, upgrade again, with the same version, factory reset, re-configure ?
Top Bottom