Search results

  1. C

    Thoughts on PDW5849-A180-E2-ASTE vs 5442-Z4E-S3

    Sorry for the long title, currently running several of the original 5442 turrets and varifocal bullets. The 5849 180 degree units in 3.6mm appear to use a similar (same?) sensor. Other than potential for fish eye effect on stitched images, what are thoughts on these units from those who have...
  2. C

    Are the 5442's still best? or time for 4k variants...

    Thanks, yes I have a couple of 2.8mm 5442's and would probably say the image looks a bit sharper than the varifocal, if you want to spread the IR wider, try using some diffuser film/vinyl, otherwise known as frosted glass film :thumb: it works a treat.
  3. C

    Are the 5442's still best? or time for 4k variants...

    Yes indeed, appreciate the heads up though. It was looking like maybe Dahua and Hikvision were pushing the non-IR cameras, they see this as the future due to better ID of suspects, vehicles etc. I have some locations which the colour cameras would work well, others maybe not so much. Been...
  4. C

    Are the 5442's still best? or time for 4k variants...

    Assuming the focus error mentioned above was reference to subject moving, focus being slow to react or similar? maybe not.
  5. C

    Are the 5442's still best? or time for 4k variants...

    That is a very interesting observation, thanks for feedback :thumb:
  6. C

    Are the 5442's still best? or time for 4k variants...

    Interesting, thanks for the feedback, seems like I will have to try out one of the 4k variants for curiosity. Not used any of the colour at night cameras yet, not easy to identify the current 4k models from the Dahua site! Seems like stock isn't easy to come by, shall have a dig around for the...
  7. C

    Are the 5442's still best? or time for 4k variants...

    I have a few 5442 series cameras running in areas without any artificial light, are the later 4k x series cameras now better, stocks seem limited. Sorry, out of touch and being a bit lazy! Looking for very best night and day performance, cost not too much of an issue. Thanks in advance
  8. C

    Using The Dahua IPC-B5442E-Z4E As A License Plate Camera

    I am running a 2MP version and it is bullet proof both day and night, using the Dahua Sunrise Sunset application to adjust focus correctly. Settings grabs from my HFW5241E-Z12E if it helps.
  9. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Interesting, thank you for the heads up, seems like a case of give it some time then bite the bullet. Deepstack seems to run fine on my setup now, have a 1660 GPU which doesn't break a sweat with my 12 cameras. My biggest grievance is with CPU hogging from BI and Rekor combined, between them I...
  10. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    On a side note, what is the consensus on this Code Project for Ai, briefly looked at it a few months back , not revisited since. Assuming there is a good reason for the switch and/or adoption of this within Blue Iris.
  11. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Missed this comment, sorry, yes, good advice, I've been in the tech support game for a good few years and concur! Easy to spend an hour or two one evening pulling hair, only to solve the problem next morning in five minutes :thumb: Second pair of eyes or come back after a break for a revisit :)
  12. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Good news is that Deepstack appears to be running again after reboot and 5.6.2.5, well, technically it was running before but...anyway :rofl: On a more positive note the HFW5442-ZE is a beast, aside from the more compact nature of the turrets I also own, these things are simply the best I've...
  13. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Excellent, thank you, just found that and gone back to 5.6.2.5 which seemed OK with Deepstack and relatively stable! suspect the PC will need a reboot, it often does when BI plays up like this. Could be the new version would be fine with a reboot also but not chancing it at the moment...
  14. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Oh no really, I am out of touch, I did tick boxes to backup the previous install, can I jump back, is it painful to do so?
  15. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Yes, been there done that. I am scared to update BI normally for fear of what will break, not the first time Deepstack got bent out of shape :oops: should know better by now. Essentially the camera is now running in BI but with me selecting make/model rather than using inspect, also had to...
  16. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Annoyingly I upgraded BI as well and have blown out all my Ai settings and that is failing also, nothing new there :mad:
  17. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    IP is fine, I can view via browser, even have it running in BI now using settings above shown in image but not using standard onvif and inspect still fails, all network settings identical to my other 10 Dahuas! doesn't make sense.
  18. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    Something screwy going on, inspect will not detect like it does with my other 10 Dahuas, if I use following settings it does show me the live feed but not zoom controls since inspect fails, is this something with the new cameras or firmware? lots of hair pulling :oops:
  19. C

    Cannot detect new DH-IPC-HFW5442EP-ZE

    I have another one of these with previous firmware and it is fine, am I going mad! can log in via browser and all is good, going mad here. Any help welcome. Firmware V2.840.0000000.10.R, Build Date: 2021-09-30 Thanks
  20. C

    Blue Iris not seeing my DH-IPC-HFW5442EP-ZE

    I have another one of these with previous firmware and it is fine, am I going mad! can log in via browser and all is good, going mad here. Any help welcome. Firmware V2.840.0000000.10.R, Build Date: 2021-09-30 Thanks
  21. C

    OpenALPR Webhook Processor for IP Cameras

    Just a minor thing I picked up on with Pushover alerts, when my clocks changed (I know :rolleyes::rolleyes:) the time stamp is now 1 hour behind on my iPhone. Not the end of the world obviously, wasn't sure if this was something I'd missed or not.
  22. C

    Way overpriced, why should I pay for BI subscription renewal?

    My expectations are pretty low these days :lol: :lmao:
  23. C

    Way overpriced, why should I pay for BI subscription renewal?

    I've got 12 cameras at the moment, and yes, I know, Milestone equivalent would be massively more expensive. But with that being said, I would pay good money for a solid system between Blue Iris and Milestone. I am not keen on subscriptions, got enough already and pretty sure Milestone for 12...
  24. C

    Way overpriced, why should I pay for BI subscription renewal?

    Very good post :) nothing like a bit of sarcastic humour :lmao: and I agree mostly except for the support/email part. Interestingly I was getting a bit sick of minor bugs in Blue Iris so ran Milestone alongside it for a few days, just to see how it compared again. In general use Milestone is...
  25. C

    5.4.7 - May 25, 2021 - Support for DeepStack custom model files

    No, it all seems a bit broken at the moment, I've gone back to a previous release due to other issues now :rolleyes:
  26. C

    Rekor recording plate more than once

    You got it, first menu that comes up :thumb:
  27. C

    Schedule causing only two cameras to stop recording

    Driving me a bit mad at the moment, if it does turn out that a full reinstall is required then I might use the opportunity to move Blue Iris to my other computer...the one I built over a year ago for Blue Iris :wow::lmao:
  28. C

    Schedule causing only two cameras to stop recording

    No :wtf: spoke too soon, tonight the same camera went offline for recording at the schedule change, shows in the live view substream, stills viewable from events but no actual video footage on playback. How odd that it worked yesterday though after many days of failure.
  29. C

    Schedule causing only two cameras to stop recording

    Update :wow: - currently running version 5.5.2.4 and tonight the camera is still working after schedule change :D Long may it last, totally forgot to check tonight and sure enough all was well when I did.
  30. C

    Schedule causing only two cameras to stop recording

    Well I tried no HA and same problem sadly, oddly enough the snapshot image in the alert list is accurate but when I go to play, the clip is just before schedule changed over to night :wtf: