Search results
-
T
Firmware for IPC-T5449H-ASE-D2 20220415 Version
If you read this thread you'll see the newest firmware is V2.840.0000000.20.R.220831. Andy sent it to me directly last time, but looks like its the same version is on the Dahua website. Specifically you want the version starting with "General_XXX" same as above...- tedrpi
- Post #6
- Forum: EmpireTech Andy
-
T
EmpireTech latest New firmware, Device Guide video, Manual WEB5.0
hey @EMPIRETECANDY - is there firmware for the IPC-HFW5449T1-ASE-D2 ? I dont see it in your intial post of links. Thanks- tedrpi
- Post #73
- Forum: EmpireTech Andy
-
T
Firmware for IPC-T5449H-ASE-D2 20220415 Version
@EMPIRETECANDY - is there newer firmware here? Looks like V2.840.0000000.20.R.220831 is on the Dahu website.- tedrpi
- Post #5
- Forum: EmpireTech Andy
-
T
Forward call from door bell station to Ip Phone
I have this working but you need a doorbell that supports SIP and video SIP. Not sure if Hikvison supports SIP, when I looked a couple years ago the only devices that support SIP were the DoorBird products. The DoorBird devices also have ping outs for gates, locks, alarms, etc. The DoorBird... -
T
New Reolink Wired POE Doorbell Cam ?
Yup, the units are sold in pairs, both units are transceivers (send and receive). The doorbird unit takes POE ethernet in on one end and outputs POE ethernet out on the other end. Looks like the other model I linked takes in ethernet and power, then outputs POE ethernet on the other end. Yes... -
T
New Reolink Wired POE Doorbell Cam ?
If you have a 2 wire doorbell, you can covert to Ethernet POE using the same cable. After struggling with a stable wifi connection for a couple months I found a pair of 2 wire to Ethernet POE adapters. I stalked ebay and found one for ~$150, expensive but in the end worth it. There are a couple... -
T
CodeProject.AI Version 2.0
YOLOv5 6.2, large. The .NET module is stopped. Using "ipcam-combined" for my day profiles, and "ipcam-combined,ipcam-dark" for night, and "license-plate" for LPR. I've tried rolling back to CPAI 2.1.8 and BI 5.7.6.8, still the same error. It appears the error is a result of BI starting, w/o BI... -
T
CodeProject.AI Version 2.0
Anyone running CPAI 2.1.9 and BI 5.7.7.2 seeing a runtime error in CPAI? So far it doesn't appear to be impacting AI detection or speed. I see the error at CPAI start but not again. I've tried uninstalling and reinstalling CPAI, same error. Full log: 08:04:05:Object Detection (YOLOv5 6.2)... -
T
CodeProject.AI Version 2.0
Maybe a dumb suggestion but have you tried clicking the three dots and enabling GPU? -
T
CodeProject.AI Version 2.0
Make sure you run the cuDNN install script, I had to run the script again when I upgraded to 2.1.6 despite my GPU working in previous versions. https://www.codeproject.com/KB/Articles/5322557/install_CUDnn.zip -
T
WTS Doorbird D101 Door Entry Station and Video Doorbell (White) - $75
Lowered to $100.- tedrpi
- Post #2
- Forum: Cameras, NVR / DVR's, hardware & more
-
T
Different settings to the Hik cams at sunrise/sunset using Blue Iris event schedule
Old thread, is this still the preferred method for adjusting the shutter speed, brightness, WDR, and other settings for a day vs night? I was hoping for a web request method that could be initiated via the BI PTZ settings and schedule. Thanks -
T
WTS Doorbird D101 Door Entry Station and Video Doorbell (White) - $75
I replaced my DoorBird and am looking to sell it. I have it posted on eBay but happy to do a discounted price for a community member, $125 $100 $75 plus shipping https://www.ebay.com/itm/145018197742 Unit was factory reset and includes printed Digital passport login information and QR codes...- tedrpi
- Thread
- Replies: 2
- Forum: Cameras, NVR / DVR's, hardware & more
-
T
New Reolink Wired POE Doorbell Cam ?
I'm showing v3.0.0.1859_23030902 as the latest from the Reolink website, released today. https://reolink.com/us/download-center/ I upgraded by hitting the doorbell webpage on my local lan. Settings -> System -> Maintenance -
T
New Reolink Wired POE Doorbell Cam ?
Here are my settings detected using ONVIF. The main and substream arent an option unless you use ONVIF. So far no drops. -
T
New Reolink Wired POE Doorbell Cam ?
If you let BI detect via ONVIF it'll pick up the sub-stream path. When you setup the motion triggers, and AI functions you can select the main or sub-stream. Setup for the sub-stream (FPS and resolution) is in the camera webpage (local IP). The substream is called "fluent" in the settings. -
T
New Reolink Wired POE Doorbell Cam ?
Quick follow up. I used @David L 's guidance above to use RTMP feeds and saw 0 drops over the course of ~5 days on my POE doorbell. Separately, I emailed Reolink CS and they sent me beta firmware to test out. After applying the beta firmware I was able to turn RTSP keep alives on and use the... -
T
New Reolink Wired POE Doorbell Cam ?
Awesome, thanks. I'll give that a try this AM. -
T
New Reolink Wired POE Doorbell Cam ?
@flynreelow , @David L - Have you guys found the sweet spot for minimal disconnects on the POE version? RTMP? Can you post your settings? I've read thru the thread and turned off RTSP keep alive in BI. I'm using the ONIVIF method for adding the camera, using the detected RTSP main and sub... -
T
CodeProject.AI Version 2.0
Did you try clicking on the 3 dots to the right of the counter (in your screenshot 542) and selecting enable GPU? If it fails to load you should see some feedback in the sever logs tabs. -
T
CodeProject.AI Version 2.0
For folks having issues with BI not allowing a model size selection, CPAI not displaying a model size, or getting CPAI to stick to a model size selection, I'd suggest a uninstall of CPAI, deleting directories, reboot, and clean re-install. Doing this fixed my issues for CPAI 2.08 and BI 5.7.0.4. -
T
CodeProject.AI Version 2.0
Any reason why my model size is blank after a reboot? I can manually change it to large but then after a reboot the field is blank. I updated the JSON to select the "Large" model size as default per here: https://www.codeproject.com/ai/docs/api/module_settings.html -
T
CodeProject.AI Version 2.0
A good time to ask, what's the recommended upgrade path on Windows? Install over top, reboot vs. uninstall, delete directories, reboot, reinstall? -
T
Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret
Awesome. @EMPIRETECANDY where can we d/l the newest firmware? Thanks -
T
CodeProject.AI Version 2.0
How can I tell which model I'm currently using? The CPAI status page shows "Object Detection (YOLOv5 6.2) GPU(CUDA). I see the options to choose choose the model size but not what my current model size is. Sorry for a potential stupid question, I searched here and the CPAI page. Thanks -
T
Review-Dahua IPC-K42A 4mp Indoor Cube cam 2.8mm
Does anyone have a link to the latest firmware for this camera? I can't get 2 way audio working with BI that others seem to have working using the IPC-A35 RSTP BI config. My camera shipped (from @EMPIRETECANDY Amazon store) with firmware from 2019 and others seem to have received devices... -
T
CodeProject.AI Version 2.0
Awesome thanks for all the efforts. I'm having the same issue others are in that BI doesn't detect custom models when started as a service. I tried the guidance here from @JNDATHP but whenever I start BI as a service the custom models field is blank... -
T
Blue Iris and DeepStack ALPR
Interesting, were you upgrading from a previous version of CPAI? I was and did an install of the new version of CPAI over the old and saw the error installing ALPR. Uninstalling and re-installing CPAI forced me to start w/o GPU enabled on any modules. Installing ALPR then worked. I was able to... -
T
Blue Iris and DeepStack ALPR
Seeing the same error. Tried a restart and updated BI to 5.6.9.1. Hoping @truglo or @MikeLud1 (if he has time) can help us out. I have ALPR checked in the AI settings of BI, and clicked the install button for ALPR on the AI server dashboard. -
T
Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret
Good on you for figuring it out. I spent 30 mins fuzzing the API using the old API guide and didn't get far. The web5.0 firmware defintely has some bugs but disappointed to see they're not even following their own spec.