Search results

  1. R

    Blue Iris Hardware Recommendations

    I wouldn't worry too much about the OS version not being PRO since you can use third party apps to get to your computer like Chrome Remote Desktop and TeamViewer. If the machine is right for you, then get it and worry about remote access later.
  2. R

    Remote Access failing but...

    Did you get a firmware pushed to your modem that made some changes in your setup by chance? Go to canyouseeme.org and put in your IP address and see if your BI port is open. If it is, check your router/firewall configs to ensure you are forwarding to the correct machine BI is running on.
  3. R

    Alerts / Motion Detection

    I don't know how much this feature is being used, and I am not sure that I understand it fully myself, but you might be able to set the recordings up like you have currently and set the Alerts tab up to send alerts based on motion zones. You would choose a zone in alerts, like zone B, to fire...
  4. R

    Dahua IP Video Door phone

    Or better even, have the camera motion/line cross/face detect trigger the VoIP call to you so you know when someone is there and can pickup quickly :)
  5. R

    Best Blue Iris setting for less false alerts due to windy cloud shadows?

    I think the setting for full screen motion was introduced to handle a case from a member here that had a zoomed camera doing plate recognition and had cars that took up a majority of the camera frame, so I doubt this will affect the clouds problem you are having. Are you currently using cancel...
  6. R

    Blue Iris Config Questions

    Look at your wall on the far right of the clips when a car goes by. The car changes the luminosity of the image and since you have a hotspot setup, you are going to trigger every time. Take out the hotspot for now and adjust your zones A and B to be a similar shape to the hotspot zone and keep...
  7. R

    Raspbery Pi2 Camera Monitor w/Rpisurv

    I had this working with my 2032 for a short period until the tearing was too much I guess for the pi and it would go to a white screen until I reboot the pi. Waiting for the RasPipC project is done by @nayr Sent from my iPhone using Tapatalk
  8. R

    Windows software for IP Cams

    Just so you are aware, this camera is lacking night capabilities as it has milo IR or IR filter. I have one of these which is great for the price and it is similar to TOP-201 but with night capabilities. http://s.aliexpress.com/u6NRb6fA Sent from my iPhone using Tapatalk
  9. R

    Stoopid question anout Full frame viewing

    Do you not have this option? I am only a handful of minor versions behind you at 4.3.0.7.
  10. R

    Stoopid question anout Full frame viewing

    Have you tried BI Settings > Cameras > and checking the box with prioritize cameras which are sending motion? I can't recall if this works in fullscreen without cycling the camera views or not. This also might only work for the tiny camera in bottom right that is live while you are in playback...
  11. R

    Windows software for IP Cams

    If this is the camera you have, then I'm afraid this type of cam normally doesn't have any desktop software that it can use. They make these types of cams for ease of setup and have to connect to remote servers to establish the connection to the video feed. Unless it is hacked, no other method...
  12. R

    Best strategy for remote access?

    Yup, you got it.
  13. R

    Changing settings on Hikvision and Huisun cameras once installed

    Make sure you are trying to access the web configuration pages using Internet Explorer and not Chrome.
  14. R

    Windows software for IP Cams

    Welcome to the forums @spoony77. You should return that camera if you can since it is garbage. That happens to be one of the type cameras that is sudo locked to using the app that it was delivered with for smart phone. It probably has a version of android or linux installed and in some cases you...
  15. R

    Need help with Mini Camera purchase

    @howiegood - you can always send a msg to the seller on aliexpress and get confirmation of the sensor before purchasing. As for the P2P, you can block the camera from access to the internet from your router/firewall in most cases so even if it doesn't turn off in the UI, it won't go out and talk...
  16. R

    motion blur on BI evaluation

    Ahh - what is your CPU load when you have motion? If you are maxing out your CPU, this might happen.
  17. R

    Black spot on hikvision lens

    If you spin the cover to the lens around, does the spot move with it? This is how you could tell if it was part of the lens cover or not. You might have a small piece of dust or debris on the lens also. Could be on the sensor, the back of the lens or the front of the lens. You will have to check...
  18. R

    Best strategy for remote access?

    @nayr is suggesting that if you use the PoE switch port with Watchdog features to power the modem, if the Watchdog isn't able to reach www.google.com or something else always available on the Internet that you could safely assume your modem was no longer connected to the Internet and may need to...
  19. R

    motion blur on BI evaluation

    I think @klasipca said there was a problem with this camera when using the high iframe rates. I would suggest putting the iframe setting back to default and see if your problem goes away. As @fenderman has said, ensure the receive buffer is set to 20mb and drop the bitrate.
  20. R

    5 MegaGixel 1/1.8" low light destroyer for $90-AVOID LONGSE JUNK

    Those pics look like manufacturers test pics to me. Sent from my iPhone using Tapatalk
  21. R

    Cannot connect remotely any more

    Follow this to make sure you are in bridge mode. You really shouldn't have to make changes to the port config on the technicolor if it is in bridge mode. It should just be passing data through the modem to your router at that point...
  22. R

    Cannot connect remotely any more

    I don't have AVG to verify the settings you need to allow access, but that isn't going to be your problem right now. One step at a time. You have to first get the modem and router to allow port 8001 access through. Until you get a green light from canyouseeme you still have a problem with the...
  23. R

    New Blue Iris questions

    Well I'll be... Didn't see it there since I was used to looking for it under the network options. Thanks @pozzello - - - Updated - - - Well I'll be... Didn't see it there since I was used to looking for it under the network options. Thanks @pozzello
  24. R

    New Blue Iris questions

    I realize it is there in the photo I attached, but that is from the help doc. I don't have it on mine any more. BI ver 4.3.0.7 x64
  25. R

    Cannot connect remotely any more

    Make sure you modem is not blocking ports also. See Forwarding on page 37 - http://setuprouter.com/router/technicolor/tc7200-u/manual-1685.pdf
  26. R

    New Blue Iris questions

    Yup, I see that now. It used to be under camera properties > video > Configure... but I don't see it there on my build. Odd. Not sure what this means exactly.
  27. R

    Cannot connect remotely any more

    If you are getting "Error: I could not see your service on" from canyouseeme.org then you don't have a port open on either the modem or the router. One or both of those devices are your problem. Look at this guide to make sure you are doing the port config correctly for your router...
  28. R

    New Blue Iris questions

    D2D just means that BI is not reformatting the video feed with another container such as MP4, it uses BI native instead which is quicker and less processor intense. As for the HA, you have to enable it on each camera separate from the BI settings then reboot to see the effects of it.
  29. R

    Need help with Mini Camera purchase

    you don't need or want the P2P garbage. If it is what I think it is, then the P2P part is giving you the ability to connect your phone up to the camera through a chinese server. You certainly don't want to do that. You should be able to use Internet Explorer to make all the changes to this...
  30. R

    Cannot connect remotely any more

    You said that everything was working up until 2 weeks ago, so what was changed in your network?
Top Bottom