Search results

  1. D

    NVR4216-16P-4KS2 dropping cam

    10-12FPS and i never changed the default setting for the Frame Interval (to be honest I have no idea what that does)
  2. D

    NVR4216-16P-4KS2 dropping cam

    Gonna give that a shot. It didnt really sink in, until something is pointed out.. Than ks
  3. D

    NVR4216-16P-4KS2 dropping cam

    Dammm it, it did it again. It goes without incident for a little while and did it again. Alll the cabls are tested and crimped 568B, both ends. I did let the nvr assign each camera its own IP address, as I plugged onr by one in. Should I go into each camera once its up and choose static? Or...
  4. D

    NVR4216-16P-4KS2 dropping cam

    It actually was sporatic and believe it was the 3MP cams. So i upgraded the firmware, but cam#5 did it again. I will crimp both ends of cam 5 if it happens again-see if it resolves the issue
  5. D

    Dahua NVR / Cameras, Unboxing, Setup and Install...

    You added an additional user to the camera, but you added the admin/admin user to the NVR? Was that an error?
  6. D

    NVR4216-16P-4KS2 dropping cam

    So the issue I am having, at-least once a week a camera is dropping off the NVR. I go over to the site, unplug the camera, plug it back in, and the camera comes up again. I have a mix of 3MP (HDW4300C) and 4MP (HDW4431C-A) which is a total of 16 cameras connected. I did upgrade the firmware on...
  7. D

    I see. Thanks for the reply.

    I see. Thanks for the reply.
  8. D

    Hey bro-queation for you. I have a 7616ni-e2/8p which I purchased a year ago and just purchased...

    Hey bro-queation for you. I have a 7616ni-e2/8p which I purchased a year ago and just purchased the 7616ni-e2/16p to replace it. Is it possible to do a setting backup and install it onto the newly ordered device? I really dont wann go thru all the setting again
  9. D

    TVitek VT‑IR2‑12 ‑ I nfrared illuminator

    I two of these unit for sale, hit me up if your interested. Asking$125
  10. D

    Updated NVR firmware published - NVR_78_79_EXX_V3.4.80_160718.zip

    I might have added the overseas part after the fact, but I'm 99.9999% sure the rest is the original file name. Thanks, for the feed back, gives me hope for taking the plunge
  11. D

    Updated NVR firmware published - NVR_78_79_EXX_V3.4.80_160718.zip

    Something dawned on me. If I have a copy of the fw, I updated my NVR with when I upgarded it, could I tell where I got it from? Just realized it says, overseas. Besides that, could the digicap.dav file tell me anything?
  12. D

    Updated NVR firmware published - NVR_78_79_EXX_V3.4.80_160718.zip

    @alastairstevenson I know I did a firmware upgrade on my device a few years back, cause the NVR would not see my fisheye cam. I am not sure if I got the firmware from the Eurppe site or Chinease site. I did the upgrade via my laptop logged into the NVR's ip address And everything went great...
  13. D

    DS-7804N-E1 / 4P - Firmware upgrading help?

    I saved the firmware and folder info on my laptop, so thats what it looked like when I downloaded the firmware.
  14. D

    Dahua Mini Black Face PTZ (SD29204S-GN & SD29204T-GN)

    Yes it is, I really don't see any issues with it, other than the sub stream setting are alittle odd?
  15. D

    Dahua Mini Black Face PTZ (SD29204S-GN & SD29204T-GN)

    I did solve the problem with the firmware nayr posted, the problem with that its a PAL signal. But it did solve the issue. Now if only I can find the NTSC firmware. Funny thing is, that after I reset the camera, it did not revert back to its previous default firmware. It actually stayed the...
  16. D

    Dahua Mini Black Face PTZ (SD29204S-GN & SD29204T-GN)

    I am having the same exact problem with my camera, did you happen to find the solution and/or firmware update? Also on my camera, when I try to enable WDR, HLC, or the other I get a failed saved message, not sure if you also have that going on with your cams?
  17. D

    Firmware for newer dahua cams as well as detailed specs available here

    Yeah, i see that. I could have sworn that I read aomething somewhere inregards to updating some of these cameras with new firmware, which had the IVS
  18. D

    Firmware for newer dahua cams as well as detailed specs available here

    Hey guys, I have (2) HDW4300C that i purchased off aliexpress and the cameras are working just fine. Of course everyone wants the latest firmware, especially if I can get one with IVS. Can anybody let me know, what firmware I can install? And a possible link. Thanks
  19. D

    Properly upgrade DS-7616N-E2/8P w/3.3.4?

    So then. The serial of my NVR has the AARH in it. My GUI is in English already, that's how it came. Is it a Chinese or European NVR.
  20. D

    Properly upgrade DS-7616N-E2/8P w/3.3.4?

    First my NVR has AARH in the serial numbers. connect laptop to same network of nvr open Firefox and login to nvr proceed to upgrade section and upgrade to 3.3.2 wait for it to upgrade and see results if go, do the same thing again but with 3.3.4 wait for it and see results Is that what you...
  21. D

    Properly upgrade DS-7616N-E2/8P w/3.3.4?

    What steps did you take when you tried to upgrade?
  22. D

    Properly upgrade DS-7616N-E2/8P w/3.3.4?

    Hello everyone DS-7616N-E2/P V3.0.10, build 111426 How to properly upgrade my NVR to V3.3.4. Do I install multi-language Chinese V3.34 firmware? or Do I install V3.3.2, then V3.3.4 European firma-all thru IE gui? Why upgrade- ds-2cd3942f-i V5.2.1 TD hack I can not see the camera in live view...
  23. D

    Hey I have a ds-7616N-E2/8P english screen. So i read on your post that i need to upgrade...

    Hey I have a ds-7616N-E2/8P english screen. So i read on your post that i need to upgrade via web/gui 3.3.2 first, then again via web/gui 3.3.4. What firmware did you use for the 3.3.2 and 3.3.4. Usa or english or chinese?? I am haveing the same damm probelm with my 4MP cam
  24. D

    Hi Darren Great job on the video tutorial on the mtd hack made easy vid. I have a...

    Hi Darren Great job on the video tutorial on the mtd hack made easy vid. I have a ds-7616N-E2/8P NVR V3.0.10, build 141126 and want to upgrade the firmware to 3.3.4. Can i just put the firmware on a usb stick straight to the nvr?? Any issues?
  25. D

    MTD HACK made easy on Video

    WHOSLOOKING IS THE MAN!! Used the video to change my chinese only Hikvision 5.2.1/DS-2CD3942F-I into english. THANK YOU
View older results
Top Bottom