Search results
-
Have you switched from DeepStack to CodeProject.AI? Poll
well.. you were 100% correct. works way better. thanks -
Have you switched from DeepStack to CodeProject.AI? Poll
will do, i honestly havent played enough with it to know the real power. assuming i just uninstall and install the package of yolo -
Have you switched from DeepStack to CodeProject.AI? Poll
I finally made the switch to code project. have been using deepstack for years. i don't use custom models honestly as i never really dug into it but probably should. I honestly only care about confirmed alerts. deepstack died on me once again and i finally tested the latest version 2.9.5 of... -
Have you switched from DeepStack to CodeProject.AI? Poll
wondering if folks are still a fan of CP vs DS? still running DS and aside from all the temp files filling up my pc its been great. -
How To Upgrade Amcrest / Lorex to Dahua Firmware And Get All Dahua Features
very true. the only issue i have is with my IP5m -
How To Upgrade Amcrest / Lorex to Dahua Firmware And Get All Dahua Features
geez im late to this game i searched the forums and it sounds like the cameras i have wont work with these firmware. they are older. IP4M-1028W IP2M-866E IP2M-858W IP5M-1176E the only one i have found that is identical to me is the amcrest IP2M-866E > Model Name: SD1A203T-GN Item Name: PTZ1A2M-3X -
DeepStack - Error 100 - Timeout
i have tried numerous things and doing the following has worked the best for me. settings > about > export settings Make sure you have your original license key, not the extended maintenance as it will ask you for it settings > about >import settings >enter license key. I rebooted the pc after... -
Have you switched from DeepStack to CodeProject.AI? Poll
her is the wonky part, i ended up exporting my config and re-importing it and everything's working fine now. -
DeepStack - Error 100 - Timeout
well someone suggested importing an older version of my backup. I actually did an export.reg and just reimported it and it started working after a few minutes. :smash: -
DeepStack - Error 100 - Timeout
ive reinstalled it numerous times including cleaning out the temp files listed above all the steps i took. it seems that this happens every year or so. The fact that i have to do a system restore and it works, then stops again within a week is an issue -
DeepStack - Error 100 - Timeout
has anyone figured this out yet ? my issue came back once again even with projectai. This happened to me years ago and the only fix was to completely reimage my windows and start from scratch -
DeepStack - Error 100 - Timeout
Ok i just fixed it but doing a system restore on 4/2/2023 . seems this fixed it BI is 5.7.3.0 Upgraded to 5.7.4.0 (AI is still working) The only windows upgrade is: "2023-03 Cumulative Update Preview for Windows 11 Version 22H2 for x64-based Systems (KB5023778)" not going to try the preview as... -
DeepStack - Error 100 - Timeout
seems were having the exact same issue. heres what i did and its still broken so i rolled back BI from 5.7.2.4 to 5.7.0.5 for the 2022.1.1 version now i no longer have the error starting DS however i still get the AI: not responding redeleted all 3 deepstack folders , c:\ , appdata, temp... -
Have you switched from DeepStack to CodeProject.AI? Poll
thanks, i cleaned that out. funny thing i just tried codeai for the heck of it and i still get the AI: not responding im going to roll back my BI update i think that screwed everything up -
Have you switched from DeepStack to CodeProject.AI? Poll
yep i deleted both deepstack from C: and from my appdata folder. did a full reinstall. i have a feeling a BI update jacked up deepstack as its now showing if i manually try to run it. I tried a few forums that stated to copy and name deepstack.exe to server.exe but no go -
Have you switched from DeepStack to CodeProject.AI? Poll
Seems that my DS just died , it started with AI: timeout, reinstalled and now have eror 404 and not responding. manually analyzing works fine. maybe its time to upgrade to codeproject ... -
amcrest PTZ not working when https is enabled
agreed i need to segment these just been lazy. When i enabled https the streams works perfectly however the ptz functionality stops working.- batch
- Post #8
- Forum: Troubleshooting
-
amcrest PTZ not working when https is enabled
Ive been using http this whole time on all my cameras and enable https for amcrest. when i enabled https on the amcrest camera under network>https it stopped working not matter what options i chose on blueiris. ptz controls work fine on the camera web interface using https. Thoughts ?- batch
- Thread
- Replies: 7
- Forum: Troubleshooting
-
PTZ suggestions
agreed. appreciate all the feedback. ill have to see if i can swing the cost right now. :)- batch
- Post #9
- Forum: Camera Installation Questions
-
PTZ suggestions
will do thanks, Still contemplating on cost of doing the nanostation vs hard wire.- batch
- Post #7
- Forum: Camera Installation Questions
-
PTZ suggestions
didn't even think about the buffering ... well i think i may end up hard wiring the shed then. I already have 1 wifi camera and 2 may be too much. Appreciate the input- batch
- Post #5
- Forum: Camera Installation Questions
-
PTZ suggestions
interesting. I finally got my unify network setup with 2 wifi6 LR ap's . ill have to take a look at those. I do have a linksys that i could technically use to extend the wifi and hard wire the camera https://www.amazon.com/gp/product/B017NT8Q24/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1- batch
- Post #3
- Forum: Camera Installation Questions
-
amcrest firmware download
yeah updates if they happen are rare for amcrest. Also dont look at the version, look at the release date. I spoke to amcrest about a version that looked lower than my version but they checked and the date of release was what i should be looking at. Seems hella backwards but their engineers... -
PTZ suggestions
I tried to use the search function and nothing comes up for PTZ... :facepalm: assuming its a glitch . Anyways, I am looking for at least a 4-5MP ptz camera but also with wifi capability. I really like the look of the amcrest IP2M-866W mainly because of the form factor and it would easily mount...- batch
- Thread
- Replies: 8
- Forum: Camera Installation Questions
-
amcrest firmware download
use this instead. i did the subscribe thing too many time until i found the full link https://amcrest.com/firmware -
The new updated android app has been pushed to the play store
well the easy fix for the issues was to use ngrok . super simple and you dont need to deal with port forwarding :-) -
The new updated android app has been pushed to the play store
the issues started after 3.0.13 correct? does anyone have an apk of 3.0.12 ? i cant find one anywhere -
The new updated android app has been pushed to the play store
i dont get it honestly. i setup acert with dynu . assuming i now have to put this into my android phone ? Not going to lie this is pretty stupid. I can get to the site via chrome on my phone but not using this app... -
The new updated android app has been pushed to the play store
hate to ask but how and where does one get a CA cert .. i checked cloudflair but you need domain... so it seems that in order to get this to work we have to purchase a cert ? -
The new updated android app has been pushed to the play store
well since the update i also cannot login.. i did however notice that on stunnel there is an error : SSL_accept: ssl/record/rec_layer_s3.c:1543: error:14094416:SSL routines:ssl3_read_bytes:sslv3 alert certificate unknown i tried searching and did use the : sslVersion = TLSv1.2 but that has...
