Search results

  1. copex

    Two Patch Panels?

    you can run VGA over C5 using a vga balun (you will need a pair) if you only have a single output you can get a VGA Y cable to split to to baluns then to two monitors or something simlar to this http://www.smartvm.com/2-port-vga-video-splitter-extender-via-cat5-spl-vga-c5-2p.html ( again you...
  2. copex

    Extending CAT6 Cable - Accidentally Cut

    you can use a Cat6 joint box Like this
  3. copex

    Best and Cheapest IP Cam for Licence Plate Reading at 40 Feet?

    what software are people using to read the plates?
  4. copex

    Professional install advice on running cat5 to outside?

    google flexible conduit 20mm, don't run internal cable externally the outer cover will go brital crack and allow water to ingress depending on your climate you could have to change the cable after a year. use an external grade cable as all ready posted, personal i would go the conduit box route.
  5. copex

    Every time my Internet drops my cameras are assigned a new IP address.

    unchecking the DHCP will set the foscam to 192.168.1.93 as a static address this is correct, we need to see the screen shot of the routers dhcp settings :-) as the router may assign .93 to a new device on the network and cause a network conflict.
  6. copex

    Connecting from external network

    i use a Asus router as it has openVPN inbuilt, Dratek router with dratek Os also supports openVPN PPPT and IPSec, or an old PC/laptop with linux and open vpn server installed Google will provide setup videos. (or a Raspberry as above ) A badly configured PPTP VPN is less secure than using...
  7. copex

    Connecting from external network

    google shows the ports required are 80 TCP, 37777 TCP, 37778 UDP. if you do not wish to use port 80 use the routers NAT/port redirect ( I.E remote port 80 local port 8080 ) may help
  8. copex

    Every time my Internet drops my cameras are assigned a new IP address.

  9. copex

    Hikvision resell / parallel import legal?

    uk - classed as gray imports, you have to comply with the laws on importing cameras, unless you are buy lager amounts you will probably be better off buying in the uk. ( camera + import cost and no/limited warranty )
  10. copex

    Rack Mounted Cable Modem

    Draytek have a rack mounting kit for there routers, you could also look at ubiquiti, mikrotik cisco all have suitable products. netger use to have a bussiness range that had a rack mounting kit
  11. copex

    Six core cable to cat5e will that work??

    you would have to power the camera locally (using 12v) ie no POE, you will need to connect the orange and green pairs on the cat5, depending on type of the 6 core cable and the length of the run will depend if it will work/how well it will work. it is strongly recommended the full run is done...
  12. copex

    Hikvision DS-2CD2T32-I5. how to show it in a iframe? and how to see it in chrome?

    the latest version of chrome dose not support NPAPI plugins - wait for hikvision to fix it or use firefox or IE
  13. copex

    Geovision cams on LTS LTN8708-P8 NVR possible?

    if the cameras and NVR support ONVIF they will connect. depending on what version of onvif is supported depends on what features will work. the most basic support will be constant recording. the geoviion camera i have only supports onvif profile s, connected to my hikvison NVR i have no control...
  14. copex

    Hikvision NVR - a few noob questions

    True, though they would still be on the same network same network :-) how ever that network is configured. ( not so true if you start talking about VPNs and routing across networks)
  15. copex

    Hikvision NVR - a few noob questions

    1 - all cameras have to be on the same network. 2 - Hikvision cameras have to be the same region as the NVR - ( brown box cameras will work if they have been correctly modified ) Cameras connecting using ONVIF are not affected by region 3 - Huisun camera will connect using ONVIF, cameras...
  16. copex

    Hikvision DS-2CD2032F-I V5.3.0 Multilanguege China Version Firmware

    contact the seller and ask for the firmware.
  17. copex

    Hikvision NVR new firmware 3.2.1

    i started by flashing a modded EN 3.0.8 then upgraded using CN firmware using hiktools to v3.x.x after that i was also able to upload the firmware directly via the web browser with out using hiktools.
  18. copex

    Hikvision NVR new firmware 3.2.1

    i had to re-flash the NVR with a hacked firmware, its now running 3.3.6 without issue :-)
  19. copex

    What would make a good spider-web removal tool?

    we use http://spiderex.co.uk/
View older results
Top Bottom