ok I have upgraded one DS-2CD2032F-I that was on firmware v5.2.5 unit now on v5.4.5(cheers @alastairstevenson)
I have 1 cam on v5.2.0 and 2 on 5.3.3 can I just hex edit same as I did with firmware v5.2.5. Or do I need to change firmware first ???
"Yes, I can do 5.4.0 and R0 cameras (2x32) too. Be patient."
Did you manage you unlock region on the DS-2CD2032F-i or DS-2CD2135F-IS cameras, so the Chinese cams can take EN firmware?
Hikvision latest firmware DS-7604NI-E1
There are 2 firmware's on he hik site
V3.4.1 build 151225 Multi-lingua
V3.4.2 build 160129 Multi-lingual
But there is no PDF with info regarding What the updates are/ or the Fix's
Has anyone installed them or know what the Fix's are?
i am...
is the cable from the c7/netgear to the POE good?
plug a laptop into he poe, can you still see cams. (assuming cams are a static I.P)
As someone has said I assume both routers are on same I.P group
Front garden 2 - unsure what's going on there.(is it condensation?)
your other two cams look similar to the quality I am getting from my DS-2CD2032. I have just bought a 12v ir illuminator in the hope quality will improve. I would like to avoid white light.
the hik cams do let you alter...
use some cams with built in sdcards. You may also want to use ups with some of the cams. Our cctv is vulnerable because there us no UPS.
dump internal cam snapshots too cloud
Just remember you only need 1 good photo of the thief for an i.d.
as someone has said a hammer takes care of the nvr.
Trouble is I am unable to get mult-language 5.3.3 firmware for Chinese camera.
the cam has 5.3.3 on it, but supplier is unable to supply 5.3.3 Multilanguage firmware.
ok contacted supplier best he could do was supply 5.2.5 English firmware and it may not have worked.
I have been messing around with the config of the cam and nvr
I have set the protocol to onvif on the nvr and the cam has worked for the last 3 days.
my nvr is a hik DS-7604NI-E1 / 4P V3.4.0...
Chinese firmware,last resort to mess with it firmware.
Do a hard reset again see what happens.(maybe it did do it correctly last time)
You should not have to keep hard reseting the cam. (avoid doing it, try soft reset)
honestly homeplugs are Guff.(they are a make do fix) I would only use if you have no choice. run rj45 to router and rj45 to nvr.....I use homeplugs but not for cctv lol
lol don't know then. all my cams have input "security code" I am using version 2.2 sadp
DS-2CD2135F-IS 5.3.3 150803
DS-2CD2135F-IS 5.3.3 150514
both have security code option. think you can also use ivms 4200
Hikvision DS-2CD2135F-IS FW. V5.3.3 build 150803 locking up
Encoding Version
V7.1 build 150801
Serial No.
DS-2CD2135F-IS20151108AACH
I have the above camera, units clock keeps freezing and the nvr stops recording the cam(nvr continues to record the other cams as It should)
The cam...