Search results

  1. P

    lost my allen wrench for hikvision ds-2cd2732f-is

    it has the little tip in the middle. Will look through my mercedes tools, might have a match in there
  2. P

    lost my allen wrench for hikvision ds-2cd2732f-is

    Does anyone know what size allen wrench came with the hikvision ds-2cd2732f-is? I need to move or replace mine and need to get it apart. I was able to remove it from its temporary location (over 6 years is temporary, right?), need to get the cover off to remount it properly. Thanks
  3. P

    Camera fried or not?

    Also, that is with the default settings on the 4MP. Haven't tweaked it yet.
  4. P

    Camera fried or not?

    The 3MP does look brighter due to the security/street light is right behind the transformer, on the right pole. You can see the shadows on the 4MP side from the light.
  5. P

    Camera fried or not?

    Here are 2 night shots. The top one is the 4MP, the other is just to the right and about 15 feet back, it is a 3MP
  6. P

    Camera fried or not?

    It is much clearer. We do have a street/security light 90 degrees to the right of it. It is a lot wider view than the previous camera. 4MP is 2688x1520 3MP is 2048x1536
  7. P

    Camera fried or not?

    The 4MP seems to be a nice camera, they did change the layout of the GUI though. Took me a while to find everything.
  8. P

    Camera fried or not?

    It looks like the jack is fried. Probably the same as the other cam, just haven't looked yet.
  9. P

    Camera fried or not?

    It is dark out now, will try to get a pic this week. I should have a 4MP replacement mid week. I will take it down then and will be able to get a better pic.
  10. P

    Camera fried or not?

    I did redo the previous jacks and replaced the patch cable as well. I have probably 100 cat6 jacks in my stash (probably a couple hundred patch cables as well.) If the new jack works, then I can move the camera to an indoor location to be safe. I need one in the basement anyway ;-)
  11. P

    Camera fried or not?

    I might just upgrade these to the 4MP version. There are a couple sellers on Amazon claiming US versions, but some say they are hacked to be US and updates will revert back to Chinese. EDIT: I just ordered a DS-2CD2342WD-I from Amazon (SafeGuard Designs) for $113. I used to buy from Wrightwood...
  12. P

    Camera fried or not?

    Hi all, We had our roof replaced above where 2 cameras sit. It rained between tearoff and getting all the flashing back up and 2 of the cameras got wet. They are Hikvision 3MP turrets, the rj45 connectors show burns on the jack and the patch cable. The camera also shows the same I replaced the...
  13. P

    Need wireless suggestions

    I ended up returning the Engenius and the Unifi lite. I picked up 2 of the Unifi AP AC LR. The Engenius had excellent signal on a horizontal plane, but it did suffer a bit from the vertical side. if you were outside a certain degree of center it would affect the signal. If you were within...
  14. P

    Need wireless suggestions

    This Engenius doesn't have the pretty interface, but I have had excellent success with them before. It was $172.99 and it does what it should. So it is cheaper than 2 of the LR from Ubiquiti. I will need to tweak it a bit to cut down on the power due to the large coverage area. You don't usually...
  15. P

    Need wireless suggestions

    Just for testing, I picked up an Engenius ENS1750. The Ubiquiti falls way short. I am able to run speed test from 200' outside my house and get 35-40mbps on 2Ghz, and 18-20mbps on 5Ghz. The Ubiquiti lost signal 25' from the house. I am able to cover the full house with the one Engenius. The...
  16. P

    Need wireless suggestions

    Will change to medium to see if it is any better.
  17. P

    Need wireless suggestions

    I changed the width to HT40 and VHT80 and my connect speeds increased greatly. Will give this a try for a while and see how it goes.
  18. P

    Need wireless suggestions

    The radio is on high, the channel width is HT20 and VHT40
  19. P

    Need wireless suggestions

    I installed the lite last night. Signal is decent overall. The engenius was stronger in some areas, but the ubiquiti has a more even coverage since it isn't as directional.
  20. P

    Need wireless suggestions

    I ordered a Lite to test. Should be here this week.
  21. P

    Need wireless suggestions

    I have been happy with Engenius, but all of mine are outside units, single band and older. Not to mention they don't look so great inside. I might have to give Ubiquiti a try,
  22. P

    Need wireless suggestions

    We have a 6000 (3000 over 3000 2-story) sq ft house and approximately 20 wifi connected devices. Currently I am re-purposing 2x ENH201 for 2.4ghz (one is primarily for my 7 wifi thermostats) and an ENH500 for the 5ghz side. I am looking for a simpler AP config to clean up the clutter. The...
  23. P

    BI 4.3.3.1 x64 CPU usage drop

    I updated last Friday or Monday, can't remember. So maybe 1 or 2 minor versions behind.
  24. P

    BI 4.3.3.1 x64 CPU usage drop

    Just updated to 4.3.3.1 and my CPU has dropped from over 45% to 29-33%. I have 10x Hikvision 3MP running at 10fps and no HW acceleration. I have to say that is a great improvement. The lowest it has been since having these 10 cameras connected. These are running on an I7-3770k
  25. P

    Hikvision DS-2CD2532F-I(S) PoE issue

    This morning it started working again. Below is the firmware info I looked to see if any errors were logged for operational, etc and there aren't any. Any suggestions?
  26. P

    Hikvision DS-2CD2532F-I(S) PoE issue

    I am not using my power budget, I think I have a 200w budget and only 5 cams on the switch pulling about 1/10th of that. I am not sure if this model can be powered by an AC adapter, but will check.
  27. P

    Hikvision DS-2CD2532F-I(S) PoE issue

    We had a power failure, now one of my DS-2CD2532F-I(S) cameras won't power up. The PoE switch was on a surge protector and UPS. The other 9 cameras are working and the PoE port on the switch is still working (tested by moving another camera to it). Any suggestions to bring it back to life?
  28. P

    BI updates, are they getting buggier

    We get updates? :nuts:
  29. P

    Rebranded Hikvision?

    Didn't realize you could get the 4MP for that.
  30. P

    Rebranded Hikvision?

    It was on sale the other day, I think $129 or $139. Must have returned to normal price.
Top Bottom