Search results
-
A
G1 platform (DS-2CD2XX5,DS-2CD2XX3G0) FW 5.5.2 firmware versions
Anyone with an idea for the above post? -
A
NVR_V4.1.10_build171031
Is it possible to roll back from version 4.1.10 to 3.4.96 ?? -
A
NVR_V4.1.10_build171031
As usual from HIK, the PDF file in the firmware does not describe any real differences relative to the previous version. I would appreciate if anyone could post screens of the new web GUI and describe the differences. -
A
G1 platform (DS-2CD2XX5,DS-2CD2XX3G0) FW 5.5.2 firmware versions
At the DOWNLOAD PORTAL there are 2 versions of the firmware 5.5.2. One is named IPC_G1_EN_NEU_5.5.2_170905.zip and the other is named IPC_G1_EN_STD_5.5.2_170905.zip. What is the difference between these two versions? -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
HIK has published only the horizontal angle of view and not for all cameras and in all their sites. The vertical angle of view has been published very rarely. In other words, HIK does not publish this HFOV and VFOV (Horizontal and Vertical Field of View) systematically for all their cameras and... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
The new low light 2335 (3MP) cameras (G1 generation) use a 4:3 ratio sensor similar to the older 2332 non-low light cameras (R6 generation). The previous generation cameras like the 2342 (4MP) (also R6 genration) use a more elongated sensor with a ratio approximately 16:9 . Unfortunately HIK... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
Your image is dark because the camera is fooled by the very strong reflection of the IR at the side wall. Turn the camera to the left to avoid watching the wall. Alternatively, rotate the camera by 180 degrees in order to change the angle of the IR to be more in parallel with the wall, and then... -
A
Multiple routers with UPNP in a LAN
One device is a modem/router/AP which is the main router/gateway of the LAN. The second router/modem/AP/VOIP ATA converter (old Fritzbox) is in bridge mode in the LAN. Both had the UPNP feature enabled. The HIK NVR had the UPNP enabled in manual mode. When I was trying to set the 8000 post of... -
A
Multiple routers with UPNP in a LAN
What happens when there are multiple routers with UPNP in a LAN? 1. Each router opens UPNP (or even creates port forwards) only for the devices connected to this router OR do we have to port forward the same port at each router? 2. Can we have the UPNP function enabled at all routers, OR we must... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
Search in ebay Germany and you will find it. -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
I have a 2CD2335 with 2.8mm and the focus is perfect. My supplier has difficulties getting the 4 and 6mm versions from the Holland HIK distribution center. HIK does not provide any real explanation or delivery date, they just stall the order. Pity, it's a very good quality camera and very good... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
@sharpharp What do you mean by " .... due to the focus ...."? and by " ... it fits nicely in the middle of the lens ranges."??? -
A
Difference between motion detection and intrusion detection?
If you have setup the static route in your main LAN router and you can not ping from any PC in your LAN the IP 192.168.254.3 of your camera, then there are two explanations. 1. Your router does not implement properly the static route. This is very common with routers provided by providers who... -
A
Difference between motion detection and intrusion detection?
@Digitalization When the cameras are connected at the internal NVR PoE switch with an IP like 192.168.254.XXX, internal PoE switch and cameras gateway IP 192.168.254.1, then in order for the camera to send email there are two requirements: 1. Enable the Virtual Hosting feature in the NVR 2... -
A
DS-2CD2355FWD-I Turret
The new generation of Ultra low light cameras like the 2335 are way better than the older 2332 and 2342 in low ambient light in terms of noise and contrast. There are several examples posted in this forum to testify this. In good daylight conditions all cameras are fairly similar, and basically... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
Thank you for your images. One correction, the 2CD2335 is 3Mpixels and not 2Mpixels as you mention at your post. I got as well a 2CD2335-2.8mm and a 2CD2342-4mm. I agree with you regarding the night vision quality. The 2335 remained in day mode for an additional 10 minutes longer than the 2342... -
A
Is SSH or telnet available in 5.4.5?
Please specify on which device model and firmware you are confirming the HIK SDK to be working on. -
A
DS-7608NI-SE/P - Firmware newer than 3.0.15
The firmware version 3.0.15 is the latest (and probably the last to ever exist) for this series of NVRs.- aster1x
- Post #2
- Forum: NVR's, DVR's & Computers
-
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
Being a distributor of HIK does not mean that you can import and distribute in your area of commercial responsibility whatever you like. In my area (South Europe) HIK decided to push specific models to distributors. -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
@triumph202 On another thread you mentioned that the 2342 clarity is better than the 2335 camera. You posted only one daylight picture of the 2335 but not of the 2342. Could you post a daylight comparison between the 2342 and the 2335? I have the 2342 but unfortunately it is no longer available... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
What are the image settings of the 2335? (exposure, brightness, etc)? -
A
How to RESET DS-2CD2342WD-I 4MP WDR EXIR Turret
I have exported the config from a 2CD2342 with fw 5.4.3 and from 2CD2352 with fw 5.4.5 and both files are binary and possibly encoded. I canot find in them in plain text the passwords of the cameras. I also cannot find the passwords of the cameras or of the NVR 7604NI-SE/P in the NVR config file... -
A
Is SSH or telnet available in 5.4.5?
Ok I tried the 32bit version of the HIK SDK. I got the screens and settings that @baumi shows, however the NVR with fw 3.0.15 can not enable ssh or telnet. Therefore I cannot access remotely the NVR. -
A
Is SSH or telnet available in 5.4.5?
I have tried the HIK utility on the following items 2CD2352 fw 5.4.5 2CD2342 fw 5.4.3 NVR DS-7604NI/SEP fw 3.0.15 And I can not get any info from the product related>DVR/NVR or IPC/IPD>Device Server. I always get an error. So the question still remains. How to get telnet or SSH access to the... -
A
Change a Hikvision lens from 2.8mm to 4mm or 6mm?
Your lens has IR coating. That means that the daylight IR spectrum is filtered initially from your lens and then whatever spectrum left, is filtered from the camera internal IR filter during day mode. This means that during night mode the IR coating of the lens will filter (cut) the IR light of... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
I notice that this new generation of turrets (2335) do not have the LDR sensor that measures the light intensity that determines the auto switching between day and night profiles. It was the small 4mm hole between the lens and the EXIR. So how do they measure now the light intensity? Do they... -
A
DS-2CD2335FWD-I - Hikvision Ultra Low Light 3M camera
What were those measurements? Do you have any pics from the internal of the camera? How long is the lens to reach the front glass? Since the length of lens can be varied due to focusing adjustments, how do they handle the length slack from the front glass? The pics would be usefull. -
A
DS-7604 Not enough memory during upgrade
I did disabled the user lockout at the camera menu but it did not change anything. Afterwards, I used the iVMS4200 and when I accessed the NVR at the device management screen the camera live view at the NVR screen came back!!!. Now I am not sure what fixed the problem. I have realized that some...