UNV with Hikvision IP cameras
- Thread starter freddytech
- Start date
Insure ONVIF is enabled in the NVR and in the camera, create an ONVIF username and password in the NVR if such ability exists.
Create a ONVIF username/password in the camera and use those same credentials to get the NVR to detect and add the camera.
Observe the info below found at chapter 4.1.1 in the user manual found here.
4.1.1 IPC Configuration
Note: The third-party cameras cannot be added to the NVR via the private protocol
(ONVIF must be used)
Create a ONVIF username/password in the camera and use those same credentials to get the NVR to detect and add the camera.
Observe the info below found at chapter 4.1.1 in the user manual found here.
4.1.1 IPC Configuration
Add and manage IP cameras.
Go to Menu > Camera > Camera > Camera.Note: The third-party cameras cannot be added to the NVR via the private protocol
(ONVIF must be used)
Last edited:
the NVR has ONVIF is enabled in the NVR but the hikvision camera password is invalid, how do i reset it 
That model camera with no "-F" suffix has no hardware reset button IIRC but.......you should be able to use their SADP Tool to perform a reset.
okay, let me check youtube on how to reset it with SADP tool.
also i bought it new in a box but password 12345 is not working on it
