Recent content by yeme

  1. Y

    ANNKE I61DR 2MP (Hikvision Cube Clone)

    Mine has a reset button on the back (WPS/RST). Scroll through this thread for detail. https://ipcamtalk.com/threads/annke-i61dr-2mp-hikvision-cube-clone.22479/page-27
  2. Y

    Help With "Choppy" Audio

    Could you provide the link to the “client plus” software? I am having a similar problem.
  3. Y

    Key Not Found

    Back up with no intervention from me. I was waiting a bit to see if something was reset on the server side of BI.
  4. Y

    Key Not Found

    Me too, this morning. Must be a problem with Perspective’s servers.
  5. Y

    ANNKE I61DR 2MP (Hikvision Cube Clone)

    I am using this weatherproof enclosure around a pond/waterfall in my outer yard as a wireless creature cam and daylight serenity view: https://www.amazon.com/gp/product/B00U0S0VM4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 I found when placing this camera (I used the Hikvision brand) flush...
  6. Y

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    Thank you both for this information. My setup may require solar power so I need to know for my installation plans.
  7. Y

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    Has anyone check the actual wattage draw? The spec states 13 W with IR off. I expect it to draw a bit less as the specs seem to be to the high side when I test other cameras I have in place. Thanks...
  8. Y

    POE splitter to repair Mini PTZ 10x

    Another option: If you can identify the unused twisted pairs, clip off the tip of a 12v 2 amp AC to DC power supply, connect it to the unused pair (you will have to terminate new RJ45s on each end). You will be able to use one pair for positive and the other pair for ground. At the camera end...
  9. Y

    solar powered security cams

    Here is how I made my connection cable to the MPPT: Cut one of the RJ45 connectors off of a ethernet cat5 cable (T568B standard - normal configuration for ethernet cabling), remove several inches of insulation to expose the individual wires. Cut off all the wires except the solid green, solid...
  10. Y

    Need help hooking up my pi3 cameras to BI!

    Thanks-I gave it a go and it works nicely in BI.
  11. Y

    solar powered security cams

    My sensor is a serial connection from the Pi's GPIO pins via a customized cat5, with an RJ45 connection to the Tracer MPPT charge controller. The controller provides the measurements and offers more categories to monitor, but I focused on these four for my setup...
  12. Y

    Need help hooking up my pi3 cameras to BI!

    I found some notes on how I got it going in the past (with Ken's help). RPi with raspian-wheezy image Recipe to install Live555 server - https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=52071 In BI, add camera with these settings: type RTSP (not tunneling over HTTP) IP xxx.xxx.xxx.xxx...
  13. Y

    Need help hooking up my pi3 cameras to BI!

    Sorry, I do not but I just found an image from that time period (2013) and will see if I can get it to work.
  14. Y

    Need help hooking up my pi3 cameras to BI!

    A few years ago I had my RPi B camera working with BI. The settings I used then were: type RTSP IP xxx.xxx.xxx.xxx RTSP port 554 video path /h264 ****this was the piece that finally worked for me at that time
  15. Y

    solar powered security cams

    My calculations on the solar panel production were based on 40% output of the panel as recommended on the Solarpaneltalk forum....good luck!
See more
Top Bottom