xcore's latest activity
-
XA dumb question, for which apologies : Would that bear down on the 'tang' that's depressed on the male RJ45 that might leave it...
-
XGood idea. Though not a huge number of errors, the expectation would be zero. It will be interesting to see if there is a low-level buildup.
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.I only use these protectors on free-hanging connectors I don't use (A/V, power and alarm dry-contacts). RJ45 goes unobstructed into the...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.Thank you very much y'all, I'm going to get deoxit or something similar, open up the camera fixture and re-seal the connection...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.Hi tigerwillow1, This was on the menu today. I have 1 camera, 3 wifi access points and another tiny device on PoE feed, and switch is...
-
XAnother thing for the list of suspects is the possibility of the switch cutting off power to the port. I've had this happen when the...
-
XMany here swear by deoxit. I guess you could try the file first and see if it comes back. But you would be surprised how little...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.Hi wittaj, Sure, I only trust my tester to show continuity. Cable was intalled by me mostly going over the attic space, so no kinks...
-
XAs you know, the cheap testers only test continuity not the ability to pass POE. It could be a kink/bend in the cable, maybe a loose...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.I didn't perform re-patching yet. That's the stats from the camera port (I'm pasting only part of it for brevity): Last flapped ...
-
XOK, that probably lets out one potential cause of the problem! Long shot - swap the patch cord, re-punch the keystone ... but you've...
-
XI'd guess it might be a cabling issue. Did you terminate the cable yourself? What termination standard did you use? What test method did...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.Hi, Yes, I terminated the cable myself. It's RJ-45 plug on the camera side and a type-110 keystone on the patch panel near the switch...
-
Xxcore replied to the thread IPC-Color4K-T180 troubleshooting.For the record, I just lost camera feed/access again (it was streaming when I was writing the post above). If there is a way to...
-
XHi, I have a pilot camera installation: IPC-Color4K-T180 (f/w 3.120.0000000.36.R, Build Date:2023-08-28) on the PFA122 fixture. Since...
-
