Recent content by winterbrew

  1. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    Not a problem - glad you got it sorted. The sprung pins in the socket are subject to stress corrosion cracking, and/or electrolytic corrosion from the 48V PoE if immersed in water and not sealed
  2. W

    Upload Videos to FTP?

    Great - thanks for your help :)
  3. W

    Upload Videos to FTP?

    Thanks for this - been using BI about 4 days now, and I was wondering why my clips aren't uploading to my FTP on my local NAS. My "new" folder was previously set to upload to FTP Just to clarify on the 'Combine or cut video each' setting. Should this be deselected, or the time interval reduced...
  4. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    OK, poking around with a multimeter set for dc volts ; Pin 7 to Pin 4 & 5 (common) - 48 V Pin 8 to Pin 4 & 5 (common) - 48 V So looks like Mode B PoE. Looking at wikipedia Mode B, T568B color schematic, RX+ is on pin 1, and RX- on pin 2, and as you mention, pin 1 & 2 can't be common. As its...
  5. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    Thanks Pozello. So in the above picture and orientation, pin 1 on both the male connector, and female socket is on the far left of the picture, and pin 8 is far right. Cable is Cat 5e supplied with NVR. This is the back of the socket. As I mentioned, I got the previous colour vs pin numbers...
  6. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    Thanks for your replies guys - as you say it could be dead. The network port on the NVR in question does still work with the other cams. Just to clarify - I got the pin numbering from the coloured wires and the solder pads were numbered in the factory female RJ45 socket which was quite well...
  7. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    Thanks for your help - yes, I've already read a few of those, and as for the rest, the colour/wiring schematic is different to the Swann cam, including the Dahua. I was hoping someone would know who makes this particular cam for Swann to get a bit of a lead.
  8. W

    Swann NHD-806 PoE IP Cam Wiring Pin Out (damaged RJ45 camera socket)

    Hello, one of my NHD-806 cams failed recently as the RJ45 connector became inadvertantly immersed in rain water, and several of the metallic connectors in the female RJ45 camera socket failed due to corrosion/cracking. I want to splice on a new female RJ45 socket to the camera to see if it...
See more
Top Bottom