Recent content by wifi75

from where I have to set relay 2 or electric strike

I have a doubt, I noticed that the door output relay remains energized for too many seconds, and this is not good for my electric lock, I could also risk damaging it. but perhaps the electric lock needs to be connected to door 2? I read the manual and it says that magnetic lock must be...

incredible guys after updating my doorbell to Firmware version V2.2.62_230204, it no longer accepts the password. now I have no solution but only to send the key to support... Are there no other solutions or am I wrong?

hello how i can find the last firmware for IPC-HFW4431M-I2 ? this is my last firmware

hello what is the correct firmware for camera 2cd2322wd-i? R0?

ok so I don't update the firmware to version V5.5.82_Build190909

yes there is

Thank you very much I was able to upload the same firmware now I have full access to the cameras! you really were amazing! Thank you so much!!! a question, I saw that hikvision has released other firmware updates than my version, should I upgrade to the latest version available?

So I tried with 192.0.0.128, the device finds it at 192.0.0.64, after a few seconds I read connect client 192.0.0.64 success then: Receive data ack error .. why?

in practice I have to connect a pc directly to the camera, and set the ip of the pc 192.168.1.64 or 192.168.1.128, download the digicap.dav and copy it to the TFTP server folder?

At the moment I don't have the dvr here with me, but I don't know the dvr passwaord either. the cameras are networked not behind the recorder.

maybe you could help me ... IP camera DS-2CD2322WD with firmware 5.5.0 build 170725,

I have lost the password of 6 cameras and a recorder, with the serial converter By ttl via telnet the password is reset by updating the firmware with tftp?

for what?

it is possible reset only password by usb ttl converter ?