Recent content by Viorel Brinzac

I'm sorry, I do not have the zip filles password. I have an IP camera similar to firmware dropped, and the manufacturer refuses to send me a new firmware. Some IP camera models can be rewritten firmware using cloud files copied to a micro SD card, search and find, can you help me with some...

What capacity should the SD card, 16 Gb, 32 Gb? IP camera accepts them or must be smaller 4Gb, 1Gb?

Good evening, with excuses come back to my problem. Post # 59 refers to folding the tftp server, but I do not come to it because I have "Link down". I want to use an SD card with these files on it, but I do not know what format the card should have ex. ntfs, fat32, or other format, and what...

OK, please HELP me.

OK and what can I do to put root file system files?

amboot> boot console=ttyS0 root=/dev/ram rootfstype=ext2 init=/bin/sh bst: 0x489D3636 1.3 (2016/12/29) 0x00000000 0x00000001 (2048) bld: 0x82B96245 1.3 (2016/12/29) 0x00000000 0x00000000 (153264) pri: 0x4DA5D661 0.1 (2016/12/29) 0x00208000 0x00000000 (1630992) lnx...

amboot> tftp boot console=ttyS0 root=/dev/ram rootfstype=ext2 init=/bin/busybox sh link down ... amboot> amboot> tftp boot console=ttyS0 root=/dev/ram rootfstype=ext2 init=/bin/sh link down ... amboot>

I do not have the prompt "#"

spinor flash ID is 0xC21820C2 ###PTB check by sy 20161119 ___ ___ _________ _ / _ \ | \/ || ___ \ | | / /_\ \| . . || |_/ / ___ ___ | |_ | _ || |\/| || ___ \ / _ \ / _ \ | __| | | | || | | || |_/...

Not working with init=/bin/sh, and ifconfig eth0 192.168.0.190 up

With the rigorous excuses I come back with my problem. Today I looked closely at my router, more precisely at the port on which the webcam is located, and I noticed that when I energize the power supply and remain locked during the boot, the LED is on, but when I go through the ESCAPE procedure...

I checked if the link is high, but .. ___ ___ _________ _ / _ \ | \/ || ___ \ | | / /_\ \| . . || |_/ / ___ ___ | |_ | _ || |\/| || ___ \ / _ \ / _ \ | __| | | | || | | || |_/ /| (_) || (_) || |_...

Hello, With excuses I found in a post to your order: "boot console=ttyS0 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/sh" replacing the existing one: "boot console=ttyS0 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/linuxrc" used it and now does not pass this pass: amboot> reboot ▒ the...

Ok, then I can hope with your help to try installing the necessary files on the SD card with the set of related commands, this way we bypass the network side and ..can be repaired.

I have a question: are webcams that can load their good firmware directly from the SD card without having a serial connection with a PC? And what format should it have?